
Disclaimer
How to change rear wheel bearing on OPEL Corsa A CC (S83) – replacement guide
downloads:
0
Views:
6
Important!
This replacement procedure can be used for:
OPEL Corsa A CC (S83) 1.0 (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.2 S (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.3 S (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.4 S (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.5 D (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.5 TD (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.2 (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.3 i (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.4 i (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.4 Si (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.6 GSI (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.6 GSI (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.2 i (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.2 N (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.3 (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.6 GSI Cat (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.4 i (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.6 GSI (F08, M08, M68, F68), OPEL Corsa A CC (S83) 1.2 (F08, M08, F68, M68) … View more
The steps may slightly vary depending on the car design.
OPEL Corsa A CC (S83) 1.0 (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.2 S (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.3 S (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.4 S (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.5 D (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.5 TD (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.2 (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.3 i (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.4 i (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.4 Si (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.6 GSI (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.6 GSI (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.2 i (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.2 N (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.3 (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.6 GSI Cat (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.4 i (F08, M08, F68, M68), OPEL Corsa A CC (S83) 1.6 GSI (F08, M08, M68, F68), OPEL Corsa A CC (S83) 1.2 (F08, M08, F68, M68) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for Corsa A CC (S83) and other OPEL models
Wheel bearing kit
Alternative products

All-purpose cleaning spray
Bearing grease
Ceramic grease
Torque wrench
Drive socket # 24
Wheel impact socket #17
Universal puller
Bush and bearing driver set
Ratchet wrench
Flat screwdriver
Hammer
Rubber mallet
Crow bar
Wheel chock
AUTODOC recommends:
- Do not re-use the bearing assembly of your OPEL CORSA A Hatchback (93_, 94_, 98_, 99_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- Please note: all work on the car – OPEL CORSA A Hatchback (93_, 94_, 98_, 99_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the car.Replacement: wheel bearing – OPEL CORSA A Hatchback (93_, 94_, 98_, 99_). Professionals recommend:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. OPEL CORSA A Hatchback (93_, 94_, 98_, 99_)
- Step 5Remove the wheel.
- Step 6Remove the wheel hub nut cap. Use a crowbar. Use a hammer.
- Step 7Remove the cotter pin securing the hub nut. Use a crowbar. Use a flat screwdriver.
- Step 8Unscrew the hub nut. Use a drive socket #24. Use a ratchet wrench.
- Step 9Remove the wheel bearing washer. Use a crowbar.
- Step 10Remove the wheel hub bearing. Use a crowbar.
- Step 11Remove the brake drum assembled with the wheel hub bearing.Replacement: wheel bearing – OPEL CORSA A Hatchback (93_, 94_, 98_, 99_). Tip from AUTODOC:Examine the brake drum. Replace it if necessary.
- Step 12Remove the inner oil seal of the wheel bearing. Use a crowbar.
- Step 13Remove the wheel hub bearing. Use a crowbar.
- Step 14Clean the hub bearing mounting seat.
- Step 15Remove the inner race of the wheel bearing from the brake drum. Use a universal puller.
- Step 16Remove the wheel bearing's outer race from the brake drum. Use a bush and bearing driver set.
- Step 17Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
- Step 18Install a new wheel bearing outer race in the brake drum. Bush and bearing driver set.
- Step 19Install the new inner race of the wheel bearing into the brake drum. Bush and bearing driver set.
- Step 20Treat the wheel hub bearing. Use bearing grease.
- Step 21Install a new hub bearing and secure it.
- Step 22Install the wheel bearing oil seal.
- Step 23Treat the stub axle. Use all-purpose cleaning spray. Use bearing grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Corsa A CC (S83) model
Popular maintenance tutorials for Opel Corsa A CC
Complete guides for changing the Wheel bearings on different OPEL CORSA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL Corsa A CC (S83)
View more
- Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
- How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
- 5 Essential Tips for beginner drivers: Avoid Common Mistakes
- Top 5 brake repair mistakes | AUTODOC tips
Most commonly replaced car parts on OPEL CORSA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME