Important!
This replacement procedure can be used for:
CITROËN Xantia Estate (X1_, X2_) 1.8 i 16V, CITROËN Xantia Estate (X1_, X2_) 1.8 i, CITROËN Xantia Estate (X1_, X2_) 1.9 SD, CITROËN Xantia Estate (X1_, X2_) 2.1 Turbo D 12V, CITROËN Xantia Estate (X1_, X2_) 1.9 Turbo D, CITROËN Xantia Estate (X1_, X2_) 2.0 i 16V, CITROËN Xantia Estate (X1_, X2_) 1.8 i, CITROËN Xantia Estate (X1_, X2_) 2.0 i View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: wheel bearing – CITROËN XANTIA Break (X1). List of the tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Torx bit T30
Drive socket # 32
Drive socket # 34
Wheel impact socket #19
Torque wrench
Flat chisel
Hammer
Tap wrench
Impact screwdriver
Rubber mallet
3-Arm Gear Puller
Crow bar
Wheel chock
Replacement: wheel bearing – CITROËN XANTIA Break (X1). AUTODOC experts recommend:
  • Do not re-use the bearing assembly of your CITROËN XANTIA Break (X1) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Warning! Shut down the engine before starting any work – CITROËN XANTIA Break (X1).
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on Citroen Xantia Estate 1995 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace CITROËN Xantia Estate (X1_, X2_) 1.9 Turbo D 1996 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Citroen Xantia Estate 2.0 i 16V 1997 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: wheel bearing – CITROËN XANTIA Break (X1). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Wheel Bearing on CITROËN Xantia Estate (X1_, X2_) 2.1 Turbo D 12V 1998 by yourself
    Remove the wheel.
  5. Step 6
    How to remove CITROËN XANTIA 1.8 i 1995 Wheel Bearing - online easy-to-follow instructions
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Wheel Bearing on CITROËN Xantia Estate (X1_, X2_) 1996: download PDF manuals and video instructions
    Unscrew the brake drum fastening. Use Torx T30. Use an impact screwdriver. Use a hammer.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Citroen Xantia Estate 2.0 i 1997 - download illustrated guide
    Remove the brake drum. Use a crowbar. Use a hammer.
    Replacement: wheel bearing – CITROËN XANTIA Break (X1). AUTODOC recommends:
    Examine the brake drum. Replace it if necessary.
  8. Step 9
    Need to know how to renew Wheel Bearing on CITROËN XANTIA 1998? This free workshop manual will help you to do it yourself
    Remove the hub bearing protection cap. Use a crowbar. Use a hammer.
    Replacement: wheel bearing – CITROËN XANTIA Break (X1). Tip from AUTODOC:
    Some cars are not equipped with wheel hub caps.
  9. Step 10
    Changing of Wheel Bearing on Citroen Xantia Estate 1995 won't be an issue if you follow this illustrated step-by-step guide
    Unstake the wheel hub retaining nut. Use a flat metal-working chisel. Use a hammer.
  10. Step 11
    CITROËN XANTIA 1.9 Turbo D Wheel Bearing replacement: online guides and video tutorials
    Unscrew the wheel hub axle nut. Use a drive socket #34. Use a tap wrench.
  11. Step 12
    Replacing Wheel Bearing on Citroen Xantia Estate 1997 1.9 Turbo D by yourself
    Remove the hub and the bearing together, since they are a sealed unit. Use 3-Arm Gear Puller.
  12. Step 13
    Xantia Estate (X1_, X2_) 1.8 i 1998 Wheel Bearing DIY replacement workshop manual
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  13. Step 14
    How to change Wheel Bearing on CITROËN Xantia Estate (X1_, X2_) 1995 - tips and tricks
    Install the new wheel hub with a bearing.
  14. Step 15
    Step-by-step recommendations for DIY replacement Citroen Xantia Estate 1996 1.8 i Wheel Bearing
    Tighten the hub. Use a drive socket #32. Use a torque wrench. Tighten it to 225 Nm torque.
    Replacement: wheel bearing – CITROËN XANTIA Break (X1). Tip from AUTODOC experts:
    The wheel bearing unit must not tilt on the axle pin.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Xantia Estate (X1, X2) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN Xantia Estate (X1_, X2_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN Xantia Estate (X1_, X2_) Wheel Bearing replacement - online guide
Tips & tricks for your CITROËN Xantia Estate (X1_, X2_)
View more
  • How to change Wheel bearings on CITROËN Xantia Estate (X1_, X2_) 1.8 i 16V - replacement tricks
    DIY jack restoration | AUTODOC tips
  • Changing Hub bearing Citroen Xantia Estate 1.9 Turbo D - Replacement Tips
    How to shine your tyres | AUTODOC tips
  • Maintenance Hacks - CITROËN Xantia Estate (X1_, X2_) 2.0 i 16V Wheel bearing kit replacement guide
    How to replace a wheel stud | AUTODOC tips
  • Replace Wheel hub bearing on Citroen Xantia Estate - free video tips
    What to do if your car's air conditioning isn't working properly | AUTODOC tips