Important!
This replacement procedure can be used for:
CITROËN Xantia Box Body / Estate (X2) 2.0 HDi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Xantia Box Body / Estate (X2) and other CITROËN models
Alternative products
Tools
Replacement: wheel bearing – CITROËN Xantia Kasten / Kombi (X2). List of the tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Torx bit T30
Drive socket # 32
Drive socket # 34
Wheel impact socket #19
Torque wrench
Flat chisel
Hammer
Tap wrench
Impact screwdriver
Rubber mallet
3-Arm Gear Puller
Crow bar
Wheel chock
Replacement: wheel bearing – CITROËN Xantia Kasten / Kombi (X2). AUTODOC experts recommend:
  • Do not re-use the bearing assembly of your CITROËN Xantia Kasten / Kombi (X2) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Warning! Shut down the engine before starting any work – CITROËN Xantia Kasten / Kombi (X2).
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on CITROËN Xantia Kasten / Kombi (X2) 1998 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace CITROËN Xantia Box Body / Estate (X2) 1.9 DT 1999 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    CITROËN Xantia Kasten / Kombi (X2) 2.0 HDi 2000 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: wheel bearing – CITROËN Xantia Kasten / Kombi (X2). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Wheel Bearing on CITROËN Xantia Box Body / Estate (X2) 2.0 HDi 2001 by yourself
    Remove the wheel.
  5. Step 6
    How to remove CITROËN XANTIA 1.9 DT 2002 Wheel Bearing - online easy-to-follow instructions
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Wheel Bearing on CITROËN Xantia Box Body / Estate (X2) 2003: download PDF manuals and video instructions
    Unscrew the brake drum fastening. Use Torx T30. Use an impact screwdriver. Use a hammer.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on CITROËN Xantia Kasten / Kombi (X2) 1.9 DT 1998 - download illustrated guide
    Remove the brake drum. Use a crowbar. Use a hammer.
    Replacement: wheel bearing – CITROËN Xantia Kasten / Kombi (X2). AUTODOC recommends:
    Examine the brake drum. Replace it if necessary.
  8. Step 9
    Need to know how to renew Wheel Bearing on CITROËN XANTIA 1999? This free workshop manual will help you to do it yourself
    Remove the hub bearing protection cap. Use a crowbar. Use a hammer.
    Replacement: wheel bearing – CITROËN Xantia Kasten / Kombi (X2). Tip from AUTODOC:
    Some cars are not equipped with wheel hub caps.
  9. Step 10
    Changing of Wheel Bearing on CITROËN Xantia Kasten / Kombi (X2) 2000 won't be an issue if you follow this illustrated step-by-step guide
    Unstake the wheel hub retaining nut. Use a flat metal-working chisel. Use a hammer.
  10. Step 11
    CITROËN XANTIA 1.9 DT Wheel Bearing replacement: online guides and video tutorials
    Unscrew the wheel hub axle nut. Use a drive socket #34. Use a tap wrench.
  11. Step 12
    Replacing Wheel Bearing on CITROËN Xantia Kasten / Kombi (X2) 2002 1.9 DT by yourself
    Remove the hub and the bearing together, since they are a sealed unit. Use 3-Arm Gear Puller.
  12. Step 13
    Xantia Box Body / Estate (X2) 1.9 DT 2003 Wheel Bearing DIY replacement workshop manual
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  13. Step 14
    How to change Wheel Bearing on CITROËN Xantia Box Body / Estate (X2) 1998 - tips and tricks
    Install the new wheel hub with a bearing.
  14. Step 15
    Step-by-step recommendations for DIY replacement CITROËN Xantia Kasten / Kombi (X2) 1999 1.9 DT Wheel Bearing
    Tighten the hub. Use a drive socket #32. Use a torque wrench. Tighten it to 225 Nm torque.
    Replacement: wheel bearing – CITROËN Xantia Kasten / Kombi (X2). Tip from AUTODOC experts:
    The wheel bearing unit must not tilt on the axle pin.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Xantia Box Body / Estate (X2) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY CITROËN Xantia Box Body / Estate (X2) Wheel Bearing replacement - online guide
Tips & tricks for your CITROËN Xantia Box Body / Estate (X2)
View more
  • How to change Wheel bearings on CITROËN Xantia Box Body / Estate (X2) 1.9 DT - replacement tricks
    How to choose the right engine oil for your car | AUTODOC
  • Changing Hub bearing CITROËN Xantia Kasten / Kombi (X2) 1.9 DT - Replacement Tips
    5 tools that make car repair incredibly simple | AUTODOC tips
  • Maintenance Hacks - CITROËN Xantia Box Body / Estate (X2) 2.0 HDi Wheel bearing kit replacement guide
    How to get your motorcycle ready for spring
  • Replace Wheel hub bearing on CITROËN Xantia Kasten / Kombi (X2) - free video tips
    7 signs of faulty fuel injectors | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
CITROËN Xantia Box Body / Estate (X2) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME