Disclaimer
How to change rear upper arm on BMW 7 (E38) – replacement guide
downloads:
8
Views:
140
Important!
This replacement procedure can be used for:
BMW 7 (E38) 730i, iL, BMW 7 (E38) 730i, iL, BMW 7 (E38) 740i, iL, BMW 7 (E38) 750i, iL, BMW 7 (E38) 740i, iL, BMW 7 (E38) 728i, iL, BMW 7 (E38) 735i, iL, BMW 7 (E38) 725tds, BMW 7 (E38) 730 d, BMW 7 (E38) 740 d, BMW 7 (E38) 730 d, BMW 7 (E38) 728ix 2.8 … View more
The steps may slightly vary depending on the car design.
BMW 7 (E38) 730i, iL, BMW 7 (E38) 730i, iL, BMW 7 (E38) 740i, iL, BMW 7 (E38) 750i, iL, BMW 7 (E38) 740i, iL, BMW 7 (E38) 728i, iL, BMW 7 (E38) 735i, iL, BMW 7 (E38) 725tds, BMW 7 (E38) 730 d, BMW 7 (E38) 740 d, BMW 7 (E38) 730 d, BMW 7 (E38) 728ix 2.8 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for 7 (E38) and other BMW models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Combination spanner #22
Drive socket # 10
Drive socket # 16
Drive socket # 22
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear upper arm – BMW 7 (E38). Professionals recommend:
- The replacement procedure is identical for the right and left upper control arms.
- All work should be done with the engine stopped.
Replacement: rear upper arm – BMW 7 (E38). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. BMW 7 (E38) - Step 5
Remove the wheel. - Step 6
Clean all joints of the arm. Use a wire brush. Use WD-40 spray. - Step 7
Disconnect the ABS sensor wiring. - Step 8
Clean all joints of the arm. Use a wire brush. Use WD-40 spray. - Step 9
Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #22. Use a drive socket #10. Use a ratchet wrench. - Step 10
Unscrew the arm fastening to the beam. Use a combination spanner #16. - Step 11
Support the arm. Use a hydraulic transmission jack. - Step 12
Remove the fastening bolt. - Step 13
Remove the rear upper arm. - Step 14
Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray. - Step 15
Mount the rear upper arm.Replacement: rear upper arm – BMW 7 (E38). AUTODOC recommends:During the installation process, use only new bolts and nuts.Do not damage the ball joint cover. - Step 16
Install the fastening bolt. - Step 17
Screw in the fastener that connects the control arm to the rear knuckle. Use a combination spanner #22. Use a drive socket #10. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 7 (E38) model
Popular maintenance tutorials for BMW E38
Complete guides for changing the Control arm on different BMW 7 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 7 (E38)
View more
5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
How I started restoring a driveshaft | Drivetrain restoration – Part 1
Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
Most commonly replaced car parts on BMW 7 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























