Important!
This replacement procedure can be used for:
VW Passat Alltrack (365) 2.0 TSI 4motion, VW Passat Alltrack (365) 1.8 TSI, VW Passat Alltrack (365) 1.8 TSI, VW Passat Alltrack (365) 2.0 TDI 4motion, VW Passat Alltrack (365) 2.0 TDI, VW Passat Alltrack (365) 2.0 TDI 4motion, VW Passat Alltrack (365) 2.0 TDI 4motion View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for Passat Alltrack (365) and other VW models
Alternative products
How to change Suspension arm on VW Passat B7 Alltrack 2.0 TDI 4motion – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: rear suspension lower trailing arm – VW PASSAT ALLTRACK (365). List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 15
Drive socket # 16
Drive socket # 18
Combination spanner #16
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Torque wrench
Pin punch
Hammer
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear suspension lower trailing arm – VW PASSAT ALLTRACK (365). Tip from AUTODOC experts:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: rear suspension lower trailing arm – VW PASSAT ALLTRACK (365). Recommended sequence of steps:
  1. Step 1
    How to change Control Arm on VW Passat B7 Alltrack 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW Passat Alltrack (365) 2.0 TDI 4motion 2013 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    VW Passat B7 Alltrack 2.0 TDI 2014 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: rear suspension lower trailing arm – VW PASSAT ALLTRACK (365). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on VW Passat Alltrack (365) 1.8 TSI 2012 by yourself
    Remove the wheel.
  5. Step 6
    How to remove VW PASSAT 2.0 TDI 4motion 2013 Control Arm - online easy-to-follow instructions
    Support the arm. Use a hydraulic transmission jack.
  6. Step 7
    How to replace Control Arm on VW Passat Alltrack (365) 2014: download PDF manuals and video instructions
    Clean the control arm fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on VW Passat B7 Alltrack 2.0 TSI 4motion 2012 - download illustrated guide
    Disconnect the transverse stabilizer fastener from the link. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Control Arm on VW PASSAT 2013? This free workshop manual will help you to do it yourself
    Remove the retaining clip of the parking brake cable. Use a pin punch. Use a hammer.
  9. Step 10
    Changing of Control Arm on VW Passat B7 Alltrack 2014 won't be an issue if you follow this illustrated step-by-step guide
    Undo the bracket attaching the parking brake cable to the trailing arm.
  10. Step 11
    VW PASSAT 2.0 TDI 4motion Control Arm replacement: online guides and video tutorials
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a drive socket #18. Use a tap wrench.
  11. Step 12
    Replacing Control Arm on VW Passat B7 Alltrack 2013 2.0 TDI 4motion by yourself
    Unscrew the fastener connecting the trailing arm to the car body. Use a drive socket #15. Use a ratchet wrench.
  12. Step 13
    Passat Alltrack (365) 2.0 TDI 4motion 2014 Control Arm DIY replacement workshop manual
    Remove the arm.
  13. Step 14
    How to change Control Arm on VW Passat Alltrack (365) 2012 - tips and tricks
    Unscrew the bracket fastening to the arm. Use a drive socket #18. Use a ratchet wrench.
  14. Step 15
    Step-by-step recommendations for DIY replacement VW Passat B7 Alltrack 2013 2.0 TDI 4motion Control Arm
    Remove the bracket from the arm.
  15. Step 16
    DIY replacement of Control Arm on VW Passat Alltrack (365) 2.0 TSI 4motion 2014 is not an issue anymore with our step-by-step tutorial
    Fit the new suspension trailing arm into the bracket. Use a drive socket #18. Use a torque wrench. Tighten it to 90 Nm torque.+90°
    AUTODOC recommends:
    Important! Be sure to use new fasteners.
  16. Step 17
    How to change Control Arm on VW Passat B7 Alltrack 2012 - free PDF and video manuals
    Install a new arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VW Passat B7 Alltrack (365) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VW Passat Alltrack (365) Control Arm replacement - online guide
Tips & tricks for your VW Passat Alltrack (365)
View more
  • How to change Control arm on VW Passat Alltrack (365) 2.0 TSI 4motion - replacement tricks
    How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
  • Changing Wishbone VW Passat B7 Alltrack 2.0 TDI 4motion - Replacement Tips
    Which Coolant is Best? Comparison Test | AUTODOC
  • Maintenance Hacks - VW Passat Alltrack (365) 2.0 TDI Control arms replacement guide
    #DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
  • Replace Trailing arm on VW Passat B7 Alltrack - free video tips
    Top 5 brake repair mistakes | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VW Passat Alltrack (365) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME