How to carry out replacement: Strut Mount 1.9 TDI Seat Cordoba 6K1
Disclaimer
Change Seat Cordoba 6K1 1.9 SDI Strut Mount yourself – manuals and video tutorials

How to change rear strut mount on SEAT Cordoba Saloon (6K1, 6K2) – replacement guide

downloads: 0
Views: 8
Download your free tutorial and fix SEAT Cordoba Saloon (6K1, 6K2) 1.4 i problems yourself Download for free 1.95 MB Strut Mount for Seat Cordoba 6K1 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
SEAT Cordoba Saloon (6K1, 6K2) 1.4 i, SEAT Cordoba Saloon (6K1, 6K2) 1.6 i, SEAT Cordoba Saloon (6K1, 6K2) 1.8 i, SEAT Cordoba Saloon (6K1, 6K2) 2.0 i, SEAT Cordoba Saloon (6K1, 6K2) 1.9 TD, SEAT Cordoba Saloon (6K1, 6K2) 1.8 i 16V, SEAT Cordoba Saloon (6K1, 6K2) 1.9 SDI, SEAT Cordoba Saloon (6K1, 6K2) 1.6 i, SEAT Cordoba Saloon (6K1, 6K2) 2.0 i 16V, SEAT Cordoba Saloon (6K1, 6K2) 1.9 TDI, SEAT Cordoba Saloon (6K1, 6K2) 1.9 D, SEAT Cordoba Saloon (6K1, 6K2) 1.4 i 16V, SEAT Cordoba Saloon (6K1, 6K2) 1.9 TDI, SEAT Cordoba Saloon (6K1, 6K2) 1.0 i, SEAT Cordoba Saloon (6K1, 6K2) 1.9 SDI, SEAT Cordoba Saloon (6K1, 6K2) 1.4 16V, SEAT Cordoba Saloon (6K1, 6K2) 1.8 T 20V Cupra, SEAT Cordoba Saloon (6K1, 6K2) 1.6 i, SEAT Cordoba Saloon (6K1, 6K2) 1.3, SEAT Cordoba Saloon (6K1, 6K2) 1.4 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for Cordoba Saloon (6K1, 6K2) and other SEAT models
How to change Supporting Ring, suspension strut bearing on Seat Cordoba 6K1 1.9 TDI – step-by-step instructions for straightforward car repair Supporting Ring, suspension strut bearing
How to change Supporting Ring, suspension strut bearing on Córdoba I Saloon (6K1, 6K2) – tips for proper car maintenance
Supporting Ring, suspension strut bearing for Córdoba I Saloon (6K1, 6K2) Petrol (60 hp)
Simple DIY car repair steps – Replacing Supporting Ring, suspension strut bearing on Córdoba I Saloon (6K1, 6K2)
Supporting Ring, suspension strut bearing for Córdoba I Saloon (6K1, 6K2) Petrol (75 hp)
Easy tricks to help you to replace Supporting Ring, suspension strut bearing on Córdoba I Saloon (6K1, 6K2)
Supporting Ring, suspension strut bearing for Córdoba I Saloon (6K1, 6K2) Petrol (90 hp)
Supporting Ring, suspension strut bearing removal & installation, incredibly easy steps for Córdoba I Saloon (6K1, 6K2)
Supporting Ring, suspension strut bearing for Córdoba I Saloon (6K1, 6K2) Petrol (115 hp)
Changing Supporting Ring, suspension strut bearing on Córdoba I Saloon (6K1, 6K2) – tips for first time repair
Supporting Ring, suspension strut bearing for Córdoba I Saloon (6K1, 6K2) Diesel (75 hp)
Main steps for Supporting Ring, suspension strut bearing replacement on Córdoba I Saloon (6K1, 6K2)
Supporting Ring, suspension strut bearing for Córdoba I Saloon (6K1, 6K2) Petrol (129 hp)
How to change Supporting Ring, suspension strut bearing on Córdoba I Saloon (6K1, 6K2) – tips for proper car maintenance
Supporting Ring, suspension strut bearing for Córdoba I Saloon (6K1, 6K2) Diesel (64 hp)
Simple DIY car repair steps – Replacing Supporting Ring, suspension strut bearing on Córdoba I Saloon (6K1, 6K2)
Supporting Ring, suspension strut bearing for Córdoba I Saloon (6K1, 6K2) Petrol (101 hp)
Easy tricks to help you to replace Supporting Ring, suspension strut bearing on Córdoba I Saloon (6K1, 6K2)
Supporting Ring, suspension strut bearing for Córdoba I Saloon (6K1, 6K2) Petrol (150 hp)
Tools
Replacement: strut mount – SEAT CORDOBA (6K1, 6K2). Tools you'll need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Combination spanner #17
Drive socket # 10
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Tap wrench
Shock absorber socket #DD5,2
Hydraulic strut spring compressor
Hydraulic transmission jack
Wheel chock
Buy tools
Replacement: strut mount – SEAT CORDOBA (6K1, 6K2). Professionals recommend:
  • The replacement procedure is identical for the mounts of the left and right shock struts of the rear suspension.
  • All mounts of the rear shock struts should be replaced simultaneously.
  • All work should be done with the engine stopped.
Replacement: strut mount – SEAT CORDOBA (6K1, 6K2). Take the following steps:
  1. Step 1
    Open the boot lid.
    Step 2
    Move the folding shelf and detach it from the retainers. By doing this, you will get access to the side trim plastic panels.
    Step 3
    How to change Strut Mount on Seat Cordoba 6K1 1993 - free PDF and video manuals
    Unscrew the fasteners of the side plastic trim panel. Use a drive socket #10. Use a ratchet wrench.
  2. Step 4
    How to replace SEAT Cordoba Saloon (6K1, 6K2) 1.9 TDI 1994 Strut Mount - step-by-step manuals and video guides
    Remove the side plastic cover.
  3. Step 5
    Seat Cordoba 6K1 1.4 i 1995 Strut Mount replacement: free workshop manuals
    Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
  4. Step 6
    Changing Strut Mount on SEAT Cordoba Saloon (6K1, 6K2) 1.6 i 1996 by yourself
    Loosen the upper fastener of the shock strut mount. Use a combination spanner #17. Use a shock absorber socket #DD5,2. Use a ratchet wrench.
  5. Step 7
    How to remove SEAT CORDOBA 1.4 16V 1997 Strut Mount - online easy-to-follow instructions
    Secure the wheels with chocks.
  6. Step 8
    How to replace Strut Mount on SEAT Cordoba Saloon (6K1, 6K2) 1998: download PDF manuals and video instructions
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  7. Step 9
    Raise the rear of the car and secure on supports.
    Step 10
    How hard is it to do yourself: Strut Mount replacement on Seat Cordoba 6K1 1.9 TDI 1999 - download illustrated guide
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT CORDOBA (6K1, 6K2)
  8. Step 11
    Need to know how to renew Strut Mount on SEAT CORDOBA 2000? This free workshop manual will help you to do it yourself
    Remove the wheel.
  9. Step 12
    Changing of Strut Mount on Seat Cordoba 6K1 2001 won't be an issue if you follow this illustrated step-by-step guide
    Clean the shock strut fasteners. Use a wire brush. Use WD-40 spray.
  10. Step 13
    SEAT CORDOBA 1.9 SDI Strut Mount replacement: online guides and video tutorials
    Support the rear suspension beam. Use a hydraulic transmission jack.
  11. Step 14
    Replacing Strut Mount on Seat Cordoba 6K1 1993 1.9 TDI by yourself
    Unscrew the lower fastener of the shock absorber strut. Use a combination spanner #17. Use a drive socket #17. Use a tap wrench.
  12. Step 15
    Cordoba Saloon (6K1, 6K2) 1.4 16V 1994 Strut Mount DIY replacement workshop manual
    Unscrew the top fastening of the shock strut mount.
    AUTODOC recommends:
    To avoid injuries, hold the shock strut when undoing the fastening bolts.
  13. Step 16
    How to change Strut Mount on SEAT Cordoba Saloon (6K1, 6K2) 1995 - tips and tricks
    Remove the mounting from under the rear axle beam.
    Replacement: strut mount – SEAT CORDOBA (6K1, 6K2). Tip:
    Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
  14. Step 17
    Step-by-step recommendations for DIY replacement Seat Cordoba 6K1 1996 1.4 16V Strut Mount
    Remove the fastening bolt.
  15. Step 18
    DIY replacement of Strut Mount on SEAT Cordoba Saloon (6K1, 6K2) 1.9 SDI 1997 is not an issue anymore with our step-by-step tutorial
    Remove the suspension strut.
  16. Step 19
    Set the shock absorber strut on the spring compressor tool.
    AUTODOC recommends:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
    Step 20
    How to change Strut Mount on Seat Cordoba 6K1 1993 - free PDF and video manuals
    Remove the top strut mount.
    Replacement: strut mount – SEAT CORDOBA (6K1, 6K2). AUTODOC recommends:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
  17. Step 21
    How to replace SEAT Cordoba Saloon (6K1, 6K2) 1.9 TDI 1994 Strut Mount - step-by-step manuals and video guides
    Treat the shock strut rod. Use a wire brush. Use WD-40 spray. Use copper grease.
  18. Step 22
    Seat Cordoba 6K1 1.4 i 1995 Strut Mount replacement: free workshop manuals
    Install a new strut mount.
  19. Step 23
    Remove the assembled shock strut.
    Step 24
    Changing Strut Mount on SEAT Cordoba Saloon (6K1, 6K2) 1.6 i 1996 by yourself
    Treat the mounting seats of the shock strut. Use a wire brush. Use WD-40 spray.
  20. Step 25
    How to remove SEAT CORDOBA 1.4 16V 1997 Strut Mount - online easy-to-follow instructions
    Install the shock strut into the wheel arch.
  21. Step 26
    How to replace Strut Mount on SEAT Cordoba Saloon (6K1, 6K2) 1998: download PDF manuals and video instructions
    Support the rear suspension beam. Use a hydraulic transmission jack.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Córdoba I Saloon (6K1, 6K2) model.

Browse tyres

Popular maintenance tutorials for Seat Cordoba 6K1

More manuals for Seat Cordoba 6K1

Complete guides for changing the Strut mount on different SEAT CORDOBA models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SEAT Cordoba Saloon (6K1, 6K2) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SEAT Cordoba Saloon (6K1, 6K2) Strut Mount replacement - online guide
Tips & tricks for your SEAT Cordoba Saloon (6K1, 6K2)
View more
  • How to change Strut mount on SEAT Cordoba Saloon (6K1, 6K2) 1.9 SDI - replacement tricks
    Important differences between car tools | AUTODOC tips
    7K views
    Published on: 16/12/2021
  • Changing Top mount Seat Cordoba 6K1 1.9 TDI - Replacement Tips
    Top 5 mistakes when buying car parts
    3K views
    Published on: 10/03/2022
  • Maintenance Hacks - SEAT Cordoba Saloon (6K1, 6K2) 1.4 i Top strut mount replacement guide
    How to paint a brake caliper | AUTODOC tips
    10K views
    Published on: 08/04/2021
  • Replace Top mounts on Seat Cordoba 6K1 - free video tips
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
    1K views
    Published on: 04/03/2021

Most commonly replaced car parts on SEAT CORDOBA

Professional manuals for the most common SEAT models