Disclaimer
How to change rear shock absorbers on VOLVO XC70 II Estate (136) – replacement guide
downloads:
6
Views:
54
Important!
This replacement procedure can be used for:
VOLVO XC70 II Estate (136) 3.2 AWD, VOLVO XC70 II Estate (136) T6 AWD, VOLVO XC70 II Estate (136) D5 AWD, VOLVO XC70 II Estate (136) D3, VOLVO XC70 II Estate (136) 3.2, VOLVO XC70 II Estate (136) 3.2 AWD, VOLVO XC70 II Estate (136) D5 AWD, VOLVO XC70 II Estate (136) 2.4 D / D4 AWD, VOLVO XC70 II Estate (136) T6 AWD, VOLVO XC70 II Estate (136) D5 AWD, VOLVO XC70 II Estate (136) 2.4 D, VOLVO XC70 II Estate (136) 3.2 AWD, VOLVO XC70 II Estate (136) 3.2 AWD, VOLVO XC70 II Estate (136) D4 AWD, VOLVO XC70 II Estate (136) D4, VOLVO XC70 II Estate (136) T5, VOLVO XC70 II Estate (136) 3.2, VOLVO XC70 II Estate (136) D5 AWD, VOLVO XC70 II Estate (136) T5 AWD, VOLVO XC70 II Estate (136) T6 AWD, VOLVO XC70 II Estate (136) D5 AWD, VOLVO XC70 II Estate (136) T6 Polestar AWD … View more
The steps may slightly vary depending on the car design.
VOLVO XC70 II Estate (136) 3.2 AWD, VOLVO XC70 II Estate (136) T6 AWD, VOLVO XC70 II Estate (136) D5 AWD, VOLVO XC70 II Estate (136) D3, VOLVO XC70 II Estate (136) 3.2, VOLVO XC70 II Estate (136) 3.2 AWD, VOLVO XC70 II Estate (136) D5 AWD, VOLVO XC70 II Estate (136) 2.4 D / D4 AWD, VOLVO XC70 II Estate (136) T6 AWD, VOLVO XC70 II Estate (136) D5 AWD, VOLVO XC70 II Estate (136) 2.4 D, VOLVO XC70 II Estate (136) 3.2 AWD, VOLVO XC70 II Estate (136) 3.2 AWD, VOLVO XC70 II Estate (136) D4 AWD, VOLVO XC70 II Estate (136) D4, VOLVO XC70 II Estate (136) T5, VOLVO XC70 II Estate (136) 3.2, VOLVO XC70 II Estate (136) D5 AWD, VOLVO XC70 II Estate (136) T5 AWD, VOLVO XC70 II Estate (136) T6 AWD, VOLVO XC70 II Estate (136) D5 AWD, VOLVO XC70 II Estate (136) T6 Polestar AWD … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Shock Absorber for XC70 II Estate (136) and other VOLVO models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Torque wrench
Combination spanner #13
Drive socket # 10
Drive socket # 18
Shock absorber socket #DD5.2
Wheel impact socket #19
Ratchet wrench
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – VOLVO XC70 II. AUTODOC recommends:
- Both shock absorbers of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- Please note: all work on the car – VOLVO XC70 II – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel bolts. Use wheel impact socket #19. Use a tap wrench. - Step 3Raise the car.Replacement: shock absorbers – VOLVO XC70 II. Tip:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Support the rear knuckle. Use a hydraulic transmission jack. - Step 7
Clean the fasteners of the shock absorber upper mount. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the shock absorber mount fasteners. Use a drive socket #10. Use a ratchet wrench. - Step 9Remove the fastening bolts.Step 10
Clean the lower shock absorber fastener. Use a wire brush. Use WD-40 spray. - Step 11
Unscrew the lower fasteners of the shock absorber. Use a drive socket #18. Use a ratchet wrench. - Step 12
Remove the fastening bolt. - Step 13
Remove the shock absorber. - Step 14
Clean the shock absorber mounting seats. Use a wire brush. - Step 15
Grip the shock absorber in a vice. - Step 16
Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray. - Step 17
Unscrew the fastener of the shock absorber piston rod. Use a combination spanner #13. Use a shock absorber socket #DD5.2. Use a ratchet wrench. - Step 18
Remove the shock absorber mount, dust boot, and bump stop.Replacement: shock absorbers – VOLVO XC70 II. AUTODOC experts recommend:Τhoroughly examine the shock absorber mount, dust boot, and bump stop. Replace them if necessary. - Step 19
Install the mount, dust boot, and bump stop on a new shock absorber.AUTODOC recommends:Before installing a new shock absorber you should pump it 3–5 times by hand. - Step 20
Tighten the shock absorber rod nut. Use a combination spanner #13. Use a shock absorber socket #DD5.2. Use a torque wrench. Tighten it to 25 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VOLVO XC70 II Estate (P24, 136) model
Popular maintenance tutorials for Volvo XC70 Estate
Complete guides for changing the Shock absorbers on different VOLVO XC70 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VOLVO XC70 II Estate (136)
View more
Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
How to align the timing marks correctly on an EA888 engine
Initial Car Inspection: What to Check Before You Buy
Most commonly replaced car parts on VOLVO XC70
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























