Important!

This replacement procedure can be used for:
VOLVO V70 III (135) T4, VOLVO V70 III (135) T5, VOLVO V70 III (135) D3 / D4, VOLVO V70 III (135) 1.6 DRIVe / D2, VOLVO V70 III (135) D5, VOLVO V70 III (135) D5 AWD, VOLVO V70 III (135) 3.2, VOLVO V70 III (135) T4F, VOLVO V70 III (135) 3.2 AWD, VOLVO V70 III (135) T6 AWD, VOLVO V70 III (135) 2.5 T, VOLVO V70 III (135) 3.2 AWD, VOLVO V70 III (135) T6 AWD, VOLVO V70 III (135) 2.4 D, VOLVO V70 III (135) D5, VOLVO V70 III (135) 2.0, VOLVO V70 III (135) 3.2, VOLVO V70 III (135) 2.0 D, VOLVO V70 III (135) D5 AWD, VOLVO V70 III (135) 2.0 BiFuel, VOLVO V70 III (135) 2.5 T FlexiFuel, VOLVO V70 III (135) 2.4 D, VOLVO V70 III (135) 2.5 T FlexiFuel, VOLVO V70 III (135) D5, VOLVO V70 III (135) D5 AWD, VOLVO V70 III (135) 1.6 D, VOLVO V70 III (135) 2.5 T, VOLVO V70 III (135) 2.0 T, VOLVO V70 III (135) D4 AWD, VOLVO V70 III (135) D3, VOLVO V70 III (135) D4, VOLVO V70 III (135) D4 AWD, VOLVO V70 III (135) T5, VOLVO V70 III (135) D2, VOLVO V70 III (135) D3, VOLVO V70 III (135) T4, VOLVO V70 III (135) 2.0 GDI, VOLVO V70 III (135) D5 AWD, VOLVO V70 III (135) T6 AWD, VOLVO V70 III (135) D5 … View more

The steps may slightly vary depending on the car design.

How to change a front shock strut on VOLVO V70 BW [TUTORIAL AUTODOC]

All the parts you need to replace – Shock Absorber for V70 III (135) and other VOLVO models

Shock absorber

        Shock absorber for V70 III (BW, 135) Petrol (180 hp)
      
        Shock absorber for V70 III (BW, 135) Petrol (241 hp)
      
        Shock absorber for V70 III (BW, 135) Diesel (163 hp)
      
        Shock absorber for V70 III (BW, 135) Diesel (114 hp)
      
        Shock absorber for V70 III (BW, 135) Diesel (215 hp)
      
        Shock absorber for V70 III (BW, 135) Diesel (215 hp)
      
        Shock absorber for V70 III (BW, 135) Petrol (243 hp)
      
        Shock absorber for V70 III (BW, 135) Petrol/Ethanol (180 hp)
      
        Shock absorber for V70 III (BW, 135) Petrol (243 hp)

Replacement: suspension strut – Volvo V70 BW. Tools you'll need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner
                      
                        Ceramic grease
                      
                        Copper grease
                      
                        Torque wrench
                      
                        Combination spanner #21
                      
                        Drive socket # 13
                      
                        Drive socket # 15
                      
                        18-mm strut nut socket
                      
                        Shock absorber socket
                      
                        HEX bit no.H6
                      
                        Wheel impact socket #19
                      
                        Ratchet wrench
                      
                        Tap wrench
                      
                        Hydraulic strut spring compressor
                      
                        Clip removal tool
                      
                        Ball joint puller
                      
                        Crow bar
                      
                        Rubber mallet
                      
                        Hydraulic transmission jack
                      
                        Fender cover
                      
                        Wheel chock

Buy tools

Replacement: suspension strut – Volvo V70 BW. AUTODOC experts recommend:

Both shock struts of the front suspension should be replaced simultaneously.
The replacement procedure is identical for the left and right shock struts of the front suspension.
Please note: all work on the car – Volvo V70 BW – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Open the bonnet.
Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3

Remove the clips of the plastic cowl grille. Use a clip removal tool.
Step 4

Move the cowl grille aside to access the fasteners of the suspension strut mount.
Step 5

Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
Step 6

Loosen the upper fasteners of the suspension strut. Use a drive socket #13. Use a ratchet wrench.
Step 7

Secure the wheels with chocks.
Step 8

Loosen the fastener of the driveshaft. Use a drive socket #13. Use a tap wrench.
Step 9

Loosen the wheel bolts. Use wheel impact socket #19. Use a tap wrench.
Step 10

Raise the car.

Replacement: suspension strut – Volvo V70 BW. Tip:
If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
Step 11

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. Volvo V70 BW
Step 12

Remove the wheel.
Step 13

Detach the brake hose from the shock strut.
Step 14

Disconnect the ABS sensor wiring.
Step 15

Clean the fastener that connects the sway bar link to the suspension strut. Use a wire brush. Use WD-40 spray.
Step 16

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
Step 17

Disconnect the sway bar link from the suspension strut.
Step 18

Clean the lower fastener connecting the suspension strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 19

Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a drive socket #15. Use a ratchet wrench.
Step 20

Remove the fastening bolt.
Step 21

Unscrew the fastener connecting the drive shaft to the wheel hub. Use a drive socket #13. Use a ratchet wrench.
Step 22

Remove the fastening bolt.
Step 23

Clean the fastener connecting the ball joint to the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 24

Unscrew the fastener connecting the ball joint to the steering knuckle. Use a combination spanner #21.
Step 25

Disconnect the ball joint from the steering knuckle. Use a ball joint puller. Use a crowbar.
Step 26

Detach the driveshaft from the steering knuckle.

AUTODOC recommends:
Make sure that the drive shaft is not unloaded (when the car is jacked).
Step 27

Support the steering knuckle. Use a hydraulic transmission jack.
Step 28

Release the lower fastener connecting the shock strut to the steering knuckle. Use a special drive socket to remove the shock absorber.
Step 29

Disconnect the steering knuckle from the suspension strut. Use a rubber mallet.
Step 30

Unscrew the upper fasteners of the shock strut.

Replacement: suspension strut – Volvo V70 BW. AUTODOC recommends:
To avoid injuries, hold the shock strut when undoing the fastening bolts.
Step 31

Remove the suspension strut.
Step 32

Set the suspension strut on the spring compressor tool.

AUTODOC recommends:
Note that when using a spring compressor, the spring coils need to be securely gripped, applying pressure on both ends.Ensure the correct position of the spring in the retainer.Make sure that the spring coils fit tightly into the retainers.
Step 33

Compress the spring.
Step 34

Clean the strut piston rod. Use a wire brush. Use WD-40 spray.
Step 35

Unscrew the strut piston rod nut. Use a 18-mm strut nut socket. Use HEX No.H6. Use a ratchet wrench.
Step 36

Remove the upper strut mount together with the bump stop.
Step 37

Release the coil spring.
Step 38

Remove the spring.
Step 39

Remove the dust boot.
Step 40

Remove the rubber spring spacer.
Step 41

Remove the old shock absorber from the hydraulic coil spring compressor.
Step 42

Install the new shock absorber on the hydraulic coil spring compressor.

Replacement: suspension strut – Volvo V70 BW. Professionals recommend:
Before installing a new shock absorber you should pump it 3–5 times by hand.
Step 43

Install the rubber spring spacer.
Step 44

Install the spring on the shock absorber.
Step 45

Compress the spring.
Step 46

Install the dust boot.
Step 47

Install the upper strut mount together with the bump stop.
Step 48

Tighten the nut of the suspension strut piston rod. Use a 18-mm strut nut socket. Use HEX No.H6. Use a torque wrench. Tighten it to 50 Nm torque.
Step 49

Decompress the spring.
Step 50

Remove the assembled shock strut.
Step 51

Clean the mounting seats of the shock strut. Use a wire brush.
Step 52

Clean the splines of the drive shaft CV joint. Use a wire brush.
Step 53

Treat the splines of the driveshaft CV joint. Use copper grease.

Step 54

Clean the fastener connecting the ball joint to the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 55

Install the suspension strut into the wheel arch.

AUTODOC recommends:
Make sure that the suspension strut is installed in the correct position, according to the markings.
Step 56

Secure the upper fasteners of the shock strut. Do not tighten it.

AUTODOC recommends:
Volvo V70 BW – To avoid injury, hold the suspension strut while screwing in the fastening bolts.
Step 57

Fasten the suspension strut on the steering knuckle.
Step 58

Install the fastening bolt.
Step 59

Remove the support from under the steering knuckle.

Replacement: suspension strut – Volvo V70 BW. Tip:
Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
Step 60

Install the drive shaft.
Step 61

Connect the ball joint to the steering knuckle. Use a crowbar.
Step 62

Screw the fastener connecting the ball joint to the steering knuckle.

Step 63

Install the fastening bolt.
Step 64

Screw in the fastener of the CV axle. Use a drive socket #13. Use a ratchet wrench.
Step 65

Reconnect the sway bar link to the suspension strut.
Step 66

Screw in the fastener connecting the sway bar link to the suspension strut. Use a drive socket #15. Use a ratchet wrench.
Step 67

Connect the ABS sensor wiring.
Step 68

Attach the brake hose to the suspension strut.
Step 69

Tighten the lower fasteners of the suspension strut. Use a drive socket #15. Use a torque wrench. Tighten it to 110 Nm torque.
Step 70

Tighten the fastener connecting the ball joint to the steering knuckle. Use a combination spanner #21. Use a torque wrench. Tighten it to 110 Nm torque.
Step 71

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a torque wrench. Tighten it to 55 Nm torque.
Step 72

Clean the wheel rim mounting seat. Use a wire brush.
Step 73

Treat the surface where the brake disc contacts the wheel rim. Use ceramic grease.

Step 74

Clean the brake disk surface. Use a brake cleaner.
Step 75

Install the wheel.

Replacement: suspension strut – Volvo V70 BW. Tip from AUTODOC experts:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 76

Screw in the wheel bolts. Use wheel impact socket #19. Use a ratchet wrench.
Step 77

Lower the car.
Step 78

Tighten the CV axle fastener. Use a drive socket #13. Use a torque wrench. Tighten it to 35 Nm torque.+90°

AUTODOC recommends:
Important! Be sure to use new fasteners.
Step 79

Tighten the wheel bolts using a criss-cross pattern. Use wheel impact socket #19. Use a torque wrench. Tighten it to 140 Nm torque.
Step 80

Remove the jacks and chocks.
Step 81

Tighten the upper fasteners of the shock strut. Use a drive socket #13. Use a torque wrench. Tighten it to 24 Nm torque.
Step 82

Install and secure the cowl grille.
Step 83

Remove the fender protection cover.
Step 84

Close the bonnet.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VOLVO V70 III (BW, 135) model.

Browse tyres

How to change rear shock absorbers on Volvo V70 BW – replacement guide

Free download PDF
1.76 MB
How to change rear brake discs on Volvo V70 BW – replacement guide

Free download PDF
2.25 MB
How to change front brake discs on Volvo V70 BW – replacement guide

Free download PDF
2.36 MB
How to change rear brake pads on Volvo V70 BW – replacement guide

Free download PDF
1.6 MB
How to change front brake pads on Volvo V70 BW – replacement guide

Free download PDF
1.72 MB
How to change front wheel bearing on Volvo V70 BW – replacement guide

Free download PDF
4.22 MB

How to change front suspension strut on Volvo V70 SW – replacement guide

Free download PDF
3.2 MB
How to change rear shock absorbers on Volvo V70 SW – replacement guide

Free download PDF
2.19 MB
How to change rear shock absorbers on Volvo V70 BW – replacement guide

Free download PDF
1.76 MB
How to change front suspension strut on VOLVO V70 III Box Body / Estate (135) – replacement guide

Free download PDF
3.78 MB
How to change suspension strut on a car – replacement tutorial

Universal

Free download PDF
1.53 MB
How to change shock absorbers on a car – replacement tutorial

Universal

Free download PDF
1.07 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

How to polish an old engine valve cover to a shiny finish | AUTODOC Tips

8K views

Published on: 30/11/2023
How to fix your car with AUTODOC CLUB

16K views

Published on: 30/11/2021
What to do if your check engine light is on | AUTODOC tips

16K views

Published on: 19/08/2020
How to paint a car with a spray can | AUTODOC tips

5K views

Published on: 25/03/2021