Disclaimer
How to change rear shock absorbers on VAUXHALL Vivaro Platform / Chassis (X82) – replacement guide
downloads:
0
Views:
1
Important!
This replacement procedure can be used for:
VAUXHALL Vivaro Platform / Chassis (X82) 1.6 CDTi, VAUXHALL Vivaro Platform / Chassis (X82) 1.6 CDTI, VAUXHALL Vivaro Platform / Chassis (X82) 1.6 CDTi, VAUXHALL Vivaro Platform / Chassis (X82) 1.6 CDTi, VAUXHALL Vivaro Platform / Chassis (X82) 1.6 CDTi … View more
The steps may slightly vary depending on the car design.
VAUXHALL Vivaro Platform / Chassis (X82) 1.6 CDTi, VAUXHALL Vivaro Platform / Chassis (X82) 1.6 CDTI, VAUXHALL Vivaro Platform / Chassis (X82) 1.6 CDTi, VAUXHALL Vivaro Platform / Chassis (X82) 1.6 CDTi, VAUXHALL Vivaro Platform / Chassis (X82) 1.6 CDTi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Shock Absorber for Vivaro Platform / Chassis (X82) and other VAUXHALL models
Alternative products
Shock absorber
Wire brush
WD-40 spray
All-purpose cleaning spray
Torque wrench
21 mm combination spanner
21 mm socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Transmission jack or a second vehicle jack
Car lift or jack with jack stands, and wheel chocks
Replacement: shock absorbers – VAUXHALL VIVARO Platform/Chassis. AUTODOC experts recommend:
- Replace shock absorbers in pairs on an axle.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- All the work should be carried out with the ignition switched off.
Replacement: shock absorbers – VAUXHALL VIVARO Platform/Chassis. Take the following steps:
- Step 1Raise the vehicle.Replacement: shock absorbers – VAUXHALL VIVARO Platform/Chassis. AUTODOC recommends:If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.Step 2
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 3
Jack up the rear axle beam. Use a transmission jack or one more vehicle jack. - Step 4
Unscrew the lower fastener of the shock absorber and remove the stop plate. Use a 21 mm combination spanner. Use a 21 mm socket. Use a ratchet wrench. - Step 5
Unscrew the upper fastener of the shock absorber. Use a 21 mm combination spanner. Use a 21 mm socket. Use a ratchet wrench. - Step 6
Remove the fastening bolts. - Step 7
Remove the shock absorber. - Step 8
Clean the shock absorber mounting seats. Use a wire brush. Use an all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Vivaro Platform / Chassis (X82) model
Popular maintenance tutorials for VAUXHALL VIVARO Platform/Chassis
Free download PDF
1.44 MB
Free download PDF2.78 MB
Free download PDF2.77 MB
Free download PDF3.49 MB
Free download PDF1.66 MB
Free download PDF819.2 KB
Complete guides for changing the Shock absorbers on different VAUXHALL VIVARO models
Free download PDF1.68 MB
Free download PDF1.68 MB
Free download PDF1.68 MB
Free download PDF1.68 MB
Free download PDF1.68 MB
Free download PDF1.53 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Vivaro Platform / Chassis (X82)
View more
How to Fix P0401 ✅ error code Insufficient EGR flow
When, why, and how to change engine oil | AUTODOC tips
5 causes of turbocharger failure and how to avoid them
How to easily repair a punctured tyre | AUTODOC tips
Most commonly replaced car parts on VAUXHALL VIVARO
ОЕ number
Time to replace parts? Get even better deals in our Shop app.
SCAN ME