Disclaimer
How to change rear shock absorbers on CITROËN C4 Saloon L – replacement guide
downloads:
5
Views:
34
Important!
This replacement procedure can be used for:
CITROËN C4 Saloon L 1.6 HDi … View more
The steps may slightly vary depending on the car design.
CITROËN C4 Saloon L 1.6 HDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Shock Absorber for C4 Saloon L and other CITROËN models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #13
Drive socket # 13
Drive socket # 15
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Shock absorber socket #DD6
Vice
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – CITROËN C4 Saloon L. Tip from AUTODOC experts:
- Both shock absorbers of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- Please note: all work on the car – CITROËN C4 Saloon L – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: shock absorbers – CITROËN C4 Saloon L. AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 8
Unscrew the lower fastener of the shock absorber. Use a combination spanner #13. Use a drive socket #15. Use a ratchet wrench. - Step 9
Unscrew the upper fastener of the shock absorber. Use a drive socket #13. Use a ratchet wrench.AUTODOC recommends:Important! Hold the shock absorber while unscrewing the fastening bolts. CITROËN C4 Saloon L - Step 10
Remove the fastening bolts. - Step 11
Remove the shock absorber. - Step 12
Grip the shock absorber in a vice. - Step 13
Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray. - Step 14
Remove the shock absorber piston rod fastening. Use a shock absorber socket DD№6. Use a drive socket #16. Use a ratchet wrench. - Step 15
Remove the shock absorber mount, boot and bump stop.AUTODOC recommends:Replacement: shock absorbers – CITROËN C4 Saloon L. Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary.Before installing a new shock absorber you should pump it manually 3-5 times. - Step 16
Install the mount, boot and bump stop onto a new shock absorber. - Step 17
Tighten the shock absorber rod nut. Use a shock absorber socket DD№6. Use a drive socket #16. Use a torque wrench. Tighten it to 38 nm torque. - Step 18
Treat the shock absorber rod fastener. Use copper grease. - Step 19
Release the vice and take out the shock absorber. - Step 20
Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C4 I Saloon model
Popular maintenance tutorials for CITROËN C4 Saloon L
Complete guides for changing the Shock absorbers on different CITROËN C4 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C4 Saloon L
View more
How to remove scratches from car plastic | AUTODOC tips
How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
K2 ROTON wheel cleaner overview
Most commonly replaced car parts on CITROËN C4
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























