Disclaimer
How to change rear shock absorbers on AUDI A3 Hatchback (8P1) – replacement guide
downloads:
2
Views:
140
Important!
This replacement procedure can be used for:
AUDI A3 Hatchback (8P1) 1.6 E-Power, AUDI A3 Hatchback (8P1) 2.0 FSI, AUDI A3 Hatchback (8P1) 1.6, AUDI A3 Hatchback (8P1) 2.0 TDI 16V, AUDI A3 Hatchback (8P1) 1.9 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 3.2 V6 quattro, AUDI A3 Hatchback (8P1) 1.6 FSI, AUDI A3 Hatchback (8P1) 2.0 TFSI, AUDI A3 Hatchback (8P1) 2.0 TFSI quattro, AUDI A3 Hatchback (8P1) 2.0 TDI 16V quattro, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI quattro, AUDI A3 Hatchback (8P1) S3 quattro, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI quattro, AUDI A3 Hatchback (8P1) 1.8 TFSI, AUDI A3 Hatchback (8P1) 1.4 TFSI, AUDI A3 Hatchback (8P1) S3 quattro, AUDI A3 Hatchback (8P1) 1.8 TFSI quattro, AUDI A3 Hatchback (8P1) 1.6 TDI, AUDI A3 Hatchback (8P1) 1.6 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 1.2 TSI … View more
The steps may slightly vary depending on the car design.
AUDI A3 Hatchback (8P1) 1.6 E-Power, AUDI A3 Hatchback (8P1) 2.0 FSI, AUDI A3 Hatchback (8P1) 1.6, AUDI A3 Hatchback (8P1) 2.0 TDI 16V, AUDI A3 Hatchback (8P1) 1.9 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 3.2 V6 quattro, AUDI A3 Hatchback (8P1) 1.6 FSI, AUDI A3 Hatchback (8P1) 2.0 TFSI, AUDI A3 Hatchback (8P1) 2.0 TFSI quattro, AUDI A3 Hatchback (8P1) 2.0 TDI 16V quattro, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI quattro, AUDI A3 Hatchback (8P1) S3 quattro, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI quattro, AUDI A3 Hatchback (8P1) 1.8 TFSI, AUDI A3 Hatchback (8P1) 1.4 TFSI, AUDI A3 Hatchback (8P1) S3 quattro, AUDI A3 Hatchback (8P1) 1.8 TFSI quattro, AUDI A3 Hatchback (8P1) 1.6 TDI, AUDI A3 Hatchback (8P1) 1.6 TDI, AUDI A3 Hatchback (8P1) 2.0 TDI, AUDI A3 Hatchback (8P1) 1.2 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Shock Absorber for A3 Hatchback (8P1) and other AUDI models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 16
Drive socket # 18
Torx bit T27
Wheel impact socket #17
Ratchet wrench
Torque wrench
Shock absorber socket #DD6
Crow bar
Vice
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – AUDI A3 (8P1). Professionals recommend:
- Both shock absorbers of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- All work should be done with the engine stopped.
Replacement: shock absorbers – AUDI A3 (8P1). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: shock absorbers – AUDI A3 (8P1). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the fasteners of the locker. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the wheel arch cover fasteners. Use Torx T27. - Step 8
Move the part aside. - Step 9
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the lower fastener of the shock absorber. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench. - Step 11
Support the arm. Use a hydraulic transmission jack. - Step 12
Remove the fastening bolt. - Step 13
Unscrew the upper fastener of the shock absorber. Use a drive socket #16. Use a ratchet wrench.AUTODOC recommends:AUDI A3 (8P1) – To avoid injury, hold the shock absorber while unscrewing the fastening bolts. - Step 14
Remove the support from under the arm.Replacement: shock absorbers – AUDI A3 (8P1). AUTODOC experts recommend:Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms. - Step 15
Remove the shock absorber. - Step 16
Grip the shock absorber in a vice. - Step 17
Remove the protective cap of the shock absorber mount. Use a crowbar. - Step 18
Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray. - Step 19
Remove the shock absorber piston rod fastening. Use a shock absorber socket DD№6. Use a drive socket #16. Use a ratchet wrench. - Step 20
Remove the shock absorber mount, boot and bump stop.Replacement: shock absorbers – AUDI A3 (8P1). Tip from AUTODOC:Τhoroughly examine the shock absorber mount, dust boot, bump stop. Replace them if necessary.Before installing a new shock absorber you should pump it manually 3-5 times. - Step 21
Install the mount, boot and bump stop onto a new shock absorber. - Step 22
Screw the shock strut piston rod upper fastening. Use a shock absorber socket DD№6. Use a drive socket #16. Use a torque wrench. Tighten it to 25 nm torque. - Step 23
Treat the shock absorber rod fastener. Use copper grease. - Step 24
Install the protective cap of the shock absorber mount.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A3 Hatchback (8P1) model
Popular maintenance tutorials for Audi A3 8P
Complete guides for changing the Shock absorbers on different AUDI A3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A3 Hatchback (8P1)
View more
Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
TOP 6 WD-40 lifehacks | AUTODOC tips
5 Essential Tips for beginner drivers: Avoid Common Mistakes
Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
Most commonly replaced car parts on AUDI A3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





































