Important!
This replacement procedure can be used for:
BMW 6 Coupe (E63) 635 d, BMW 6 Coupe (E63) 630 i, BMW 6 Coupe (E63) M, BMW 6 Coupe (E63) 650 i, BMW 6 Coupe (E63) 630 i, BMW 6 Coupe (E63) 645 Ci View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: rear lower arm – BMW 6 (E63). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Combination spanner #21
Drive socket # 10
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat Screwdriver
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: rear lower arm – BMW 6 (E63). Tip from AUTODOC experts:
  • The replacement procedure is identical for the right and left upper control arms.
  • Please note: all work on the car – BMW 6 (E63) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Control Arm on BMW E63 2004 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace BMW 6 Coupe (E63) 645 Ci 2005 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    BMW E63 630 i 2006 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: rear lower arm – BMW 6 (E63). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on BMW 6 Coupe (E63) 650 i 2007 by yourself
    Remove the wheel.
  5. Step 6
    How to remove BMW 6 SERIES M 5.0 2008 Control Arm - online easy-to-follow instructions
    Disconnect the ABS sensor wiring. Use a flat screwdriver.
  6. Step 7
    How to replace Control Arm on BMW 6 Coupe (E63) 2009: download PDF manuals and video instructions
    Disconnect the brake pad wear sensor cable. Use a flat screwdriver.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on BMW E63 630i 3.0 (N52B30A, N52B30B, N52B30BF) 2010 - download illustrated guide
    Remove the mounting bracket of the ABS sensor wiring from the upper arm. Use a flat screwdriver.
  8. Step 9
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
    Step 10
    Need to know how to renew Control Arm on BMW 6 SERIES 2004? This free workshop manual will help you to do it yourself
    Unscrew the front arm fastener. Use a combination spanner #18 (2 pieces).
  9. Step 11
    Changing of Control Arm on BMW E63 2005 won't be an issue if you follow this illustrated step-by-step guide
    Remove the front fastener of the control arm. Use a crowbar. Use a flat screwdriver.
  10. Step 12
    BMW 6 SERIES 645 Ci Control Arm replacement: online guides and video tutorials
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #21. Use a drive socket #10. Use a ratchet wrench.
  11. Step 13
    Replacing Control Arm on BMW E63 2007 645 Ci by yourself
    Detach the suspension arm from the rear knuckle.
  12. Step 14
    6 Coupe (E63) M 5.0 2008 Control Arm DIY replacement workshop manual
    Remove the arm.
  13. Step 15
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
    Step 16
    How to change Control Arm on BMW 6 Coupe (E63) 2009 - tips and tricks
    Install a new arm.
    Replacement: rear lower arm – BMW 6 (E63). AUTODOC recommends:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  14. Step 17
    Attach the suspension arm to the rear knuckle.
    Step 18
    Step-by-step recommendations for DIY replacement BMW E63 2010 M 5.0 Control Arm
    Tighten the fastener connecting the suspension arm to the rear knuckle. Use a combination spanner #21. Use a drive socket #10. Use a torque wrench. Tighten it to 165 Nm torque.
  15. Step 19
    DIY replacement of Control Arm on BMW 6 Coupe (E63) 635d 3.0 2004 is not an issue anymore with our step-by-step tutorial
    Install the front fastener of the arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the BMW 6 Coupe (E63) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
BMW 6 Coupe (E63) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY BMW 6 Coupe (E63) Control Arm replacement - online guide
Tips & tricks for your BMW 6 Coupe (E63)
View more
  • How to change Control arm on BMW 6 Coupe (E63) 635d 3.0 - replacement tricks
    How to prevent car windows from fogging up | AUTODOC tips
  • Changing Wishbone BMW E63 645 Ci - Replacement Tips
    How do EGR valves work? | AUTODOC
  • Maintenance Hacks - BMW 6 Coupe (E63) 630 i Control arms replacement guide
    How to save when buying car parts
  • Replace Trailing arm on BMW E63 - free video tips
    How to paint a brake caliper | AUTODOC tips