Important!
This replacement procedure can be used for:
BMW 6 Coupe (E63) 645 Ci, BMW 6 Coupe (E63) 635 d, BMW 6 Coupe (E63) 630 i, BMW 6 Coupe (E63) 650 i, BMW 6 Coupe (E63) 630 i, BMW 6 Coupe (E63) 645 Ci View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: strut mount – BMW 6 (E63). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #13
Combination spanner #15
Combination spanner #18
Combination spanner #22
Drive socket # 13
Drive socket # 17
Drive socket # 18
Drive socket # 21
Torx bit T45
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat chisel
Hammer
Flat Screwdriver
Hydraulic strut spring compressor
Hydraulic transmission jack
Wheel chock
Fender cover
Replacement: strut mount – BMW 6 (E63). AUTODOC experts recommend:
  • The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
  • All mounts of the front shock struts should be replaced simultaneously.
  • Be sure to replace all self-locking nuts and bolts during installation.
  • Please note: all work on the car – BMW 6 (E63) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Strut Mount on BMW E63 2004 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace BMW 6 Coupe (E63) 645 Ci 2005 Strut Mount - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    BMW E63 630 i 2006 Strut Mount replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW 6 (E63)
  4. Step 5
    Changing Strut Mount on BMW 6 Coupe (E63) 650 i 2007 by yourself
    Remove the wheel.
  5. Step 6
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove BMW 6 SERIES M 5.0 2008 Strut Mount - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #15. Use a drive socket #17. Use a ratchet wrench.
  6. Step 8
    Remove the stabilizer rod.
    Step 9
    How to replace Strut Mount on BMW 6 Coupe (E63) 2009: download PDF manuals and video instructions
    Disconnect the ABS sensor wiring. Use a flat screwdriver.
  7. Step 10
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 11
    How hard is it to do yourself: Strut Mount replacement on BMW E63 630i 3.0 (N52B30A, N52B30B, N52B30BF) 2010 - download illustrated guide
    Unscrew the end fastening nut to the steering knuckle. Use a combination spanner #22. Use Torx T45. Use a ratchet wrench.
  8. Step 12
    Need to know how to renew Strut Mount on BMW 6 SERIES 2004? This free workshop manual will help you to do it yourself
    Disconnect the tie rod end from the steering knuckle.
  9. Step 13
    Clean the fasteners connecting the control arm to the subframe. Use a wire brush. Use WD-40 spray.
    Step 14
    Loosen the front fastener of the control arm. Use a combination spanner #18.
    Step 15
    Changing of Strut Mount on BMW E63 2005 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the rear fastener connecting the control arm to the subframe. Use a combination spanner #18 (2 pieces).
  10. Step 16
    BMW 6 SERIES 645 Ci Strut Mount replacement: online guides and video tutorials
    Remove the rear fastener of the control arm.
  11. Step 17
    Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 18
    Replacing Strut Mount on BMW E63 2007 645 Ci by yourself
    Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  12. Step 19
    Remove the fastening bolt.
    Step 20
    Release the lower fastener connecting the shock strut to the steering knuckle. Use a flat metal-working chisel. Use a hammer.
    Step 21
    6 Coupe (E63) M 5.0 2008 Strut Mount DIY replacement workshop manual
    Disconnect the steering knuckle from the shock absorber strut.
    Replacement: strut mount – BMW 6 (E63). AUTODOC recommends:
    Make sure that the steering knuckle is supported.
  13. Step 22
    Lower the car.
    Step 23
    Open the bonnet.
    Step 24
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 25
    Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
    Step 26
    How to change Strut Mount on BMW 6 Coupe (E63) 2009 - tips and tricks
    Unscrew the top fastening of the shock strut mount. Use a combination spanner #13. Use a drive socket #13. Use a ratchet wrench.
    AUTODOC recommends:
    BMW 6 (E63) – To avoid injury, hold the suspension strut while unscrewing the fastening bolts.
  14. Step 27
    Step-by-step recommendations for DIY replacement BMW E63 2010 M 5.0 Strut Mount
    Remove the suspension strut.
  15. Step 28
    Set the shock absorber strut on the spring compressor tool.
    Replacement: strut mount – BMW 6 (E63). Tip from AUTODOC:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
    Step 29
    DIY replacement of Strut Mount on BMW 6 Coupe (E63) 635d 3.0 2004 is not an issue anymore with our step-by-step tutorial
    Compress the spring.
  16. Step 30
    How to change Strut Mount on BMW E63 2004 - free PDF and video manuals
    Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
  17. Step 31
    How to replace BMW 6 Coupe (E63) 645 Ci 2005 Strut Mount - step-by-step manuals and video guides
    Remove the strut piston rod nut. Use a drive socket #21. Use a ratchet wrench.
  18. Step 32
    BMW E63 630 i 2006 Strut Mount replacement: free workshop manuals
    Remove the top strut mount. Use a flat screwdriver.
    Replacement: strut mount – BMW 6 (E63). Tip from AUTODOC experts:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
  19. Step 33
    Clean the mounting seat of the shock strut mount. Use a wire brush. Use WD-40 spray.
    Step 34
    Changing Strut Mount on BMW 6 Coupe (E63) 650 i 2007 by yourself
    Install a new top shock strut mount.
  20. Step 35
    How to remove BMW 6 SERIES M 5.0 2008 Strut Mount - online easy-to-follow instructions
    Tighten the shock strut piston rod nut. Use a drive socket #21. Use a torque wrench. Tighten it to 64 Nm torque.
    Replacement: strut mount – BMW 6 (E63). Tip:
    Check to make sure the spring is positioned correctly. Avoid its misalignment.
  21. Step 36
    How to replace Strut Mount on BMW 6 Coupe (E63) 2009: download PDF manuals and video instructions
    Decompress the spring.
  22. Step 37
    Remove the assembled shock strut.
    Step 38
    How hard is it to do yourself: Strut Mount replacement on BMW E63 630i 3.0 (N52B30A, N52B30B, N52B30BF) 2010 - download illustrated guide
    Install the shock strut into the wheel arch.
  23. Step 39
    Need to know how to renew Strut Mount on BMW 6 SERIES 2004? This free workshop manual will help you to do it yourself
    Screw the top fastening of the shock strut mount.
    AUTODOC recommends:
    BMW 6 (E63) – To avoid injury, hold the suspension strut while screwing in the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the BMW 6 Coupe (E63) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
BMW 6 Coupe (E63) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY BMW 6 Coupe (E63) Strut Mount replacement - online guide
Tips & tricks for your BMW 6 Coupe (E63)
View more
  • How to change Strut mount on BMW 6 Coupe (E63) 635d 3.0 - replacement tricks
    Headlight Restoration | AUTODOC tips
  • Changing Top mount BMW E63 645 Ci - Replacement Tips
    How to easily repair a punctured tyre | AUTODOC tips
  • Maintenance Hacks - BMW 6 Coupe (E63) 630 i Top strut mount replacement guide
    Top 6 products for enhancing your car | AUTODOC tips
  • Replace Top mounts on BMW E63 - free video tips
    How to restore a steering wheel | AUTODOC tips