Disclaimer
How to change rear coil springs on VW Passat B5 GP Saloon (3BG, 3B3) – replacement guide
downloads:
1
Views:
22
Important!
This replacement procedure can be used for:
VW PASSAT (3B3) 2.3 V5, VW PASSAT (3B3) 2.0, VW PASSAT (3B3) 2.5 TDI, VW PASSAT (3B3) 1.8 T 20V, VW PASSAT (3B3) 2.0, VW PASSAT (3B3) 2.5 TDI, VW PASSAT (3B3) 2.0 TDI … View more
The steps may slightly vary depending on the car design.
VW PASSAT (3B3) 2.3 V5, VW PASSAT (3B3) 2.0, VW PASSAT (3B3) 2.5 TDI, VW PASSAT (3B3) 1.8 T 20V, VW PASSAT (3B3) 2.0, VW PASSAT (3B3) 2.5 TDI, VW PASSAT (3B3) 2.0 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Springs for PASSAT (3B3) and other VW models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 16
Combination spanner #16
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
Replacement: coil springs – VW PASSAT (3B3). AUTODOC recommends:
- Both shock absorbers of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
- Please note: all work on the car – VW PASSAT (3B3) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VW PASSAT (3B3) - Step 5
Remove the wheel. - Step 6
Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 8
Unscrew the lower fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench. - Step 9
Remove the fastening bolt. - Step 10
Remove the mounting from under the rear axle beam.AUTODOC recommends:Replacement: coil springs – VW PASSAT (3B3). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms. - Step 11
Support the rear suspension beam. Use a hydraulic transmission jack. - Step 12Unscrew the lower fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.Step 13Remove the fastening bolt.Step 14
Remove the mounting from under the rear axle beam.AUTODOC recommends:VW PASSAT (3B3) – Do not lower the transmission jack sharply to avoid damaging components and mechanisms of the car. - Step 15
Take out the spring. - Step 16
Clean the coil spring mounting seats. Use a wire brush. Use WD-40 spray. - Step 17
Install the coil spring together with the rubber mounts into the mounting seats.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Passat B5 GP Saloon (3BG, 3B3) model
Popular maintenance tutorials for VW Passat 3bg Saloon
Complete guides for changing the Springs on different VW PASSAT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW PASSAT (3B3)
View more
Checking the starter without removing it | AUTODOC tips
DIY manual gearbox restoration | Drivetrain restoration – Part 3
DIY starter repair | AUTODOC tips
DIY jack restoration | AUTODOC tips
Most commonly replaced car parts on VW PASSAT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























