Disclaimer
How to change rear coil springs on VW Jetta Mk5 (1K) – replacement guide
downloads:
5
Views:
181
Important!
This replacement procedure can be used for:
VW Jetta Mk5 (1K) 1.6, VW Jetta Mk5 (1K) 1.6 FSI, VW Jetta Mk5 (1K) 1.4 TSI, VW Jetta Mk5 (1K) 1.4 TSI, VW Jetta Mk5 (1K) 1.4 TSI, VW Jetta Mk5 (1K) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
VW Jetta Mk5 (1K) 1.6, VW Jetta Mk5 (1K) 1.6 FSI, VW Jetta Mk5 (1K) 1.4 TSI, VW Jetta Mk5 (1K) 1.4 TSI, VW Jetta Mk5 (1K) 1.4 TSI, VW Jetta Mk5 (1K) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Springs for Jetta Mk5 (1K) and other VW models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: coil springs – VW JETTA III (1K2). Professionals recommend:
- Both coil springs of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right coil springs of the rear suspension.
- All work should be done with the engine stopped.
Replacement: coil springs – VW JETTA III (1K2). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: coil springs – VW JETTA III (1K2). AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean all joints of the arm. Use a wire brush. Use WD-40 spray. - Step 7
Make a mark on the camber adjustment bolt. - Step 8
Unscrew the arm fastening to the beam. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench. - Step 9
Support the arm. Use a hydraulic transmission jack. - Step 10
Remove the fastening bolt. Use a crowbar. - Step 11
Remove the support from under the arm.AUTODOC recommends:Replacement: coil springs – VW JETTA III (1K2). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms. - Step 12
Take out the spring. - Step 13
Install the coil spring together with the rubber mounts into the mounting seats. Use a crowbar. - Step 14
Support the arm. Use a hydraulic transmission jack. - Step 15
Install the fastening bolt.AUTODOC recommends:Adjust the position of the alignment bolt according to the mark. - Step 16
Remove the support from under the arm.Replacement: coil springs – VW JETTA III (1K2). Tip from AUTODOC experts:Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Jetta Mk5 (1K) model
Popular maintenance tutorials for VW Jetta 1k2
Complete guides for changing the Springs on different VW JETTA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Jetta Mk5 (1K)
View more
How to unlock your car without a key | AUTODOC tips
What to do if your check engine light is on | AUTODOC tips
5 more brake repair mistakes | Stop making these brake repair mistakes
#DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
Most commonly replaced car parts on VW JETTA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























