
Disclaimer
How to change rear coil springs on SKODA OCTAVIA (1Z3) – replacement guide
downloads:
6
Views:
68
Important!
This replacement procedure can be used for:
SKODA OCTAVIA (1Z3) 1.6 LPG, SKODA OCTAVIA (1Z3) 1.4, SKODA OCTAVIA (1Z3) 1.6, SKODA OCTAVIA (1Z3) 1.6 FSI, SKODA OCTAVIA (1Z3) 1.4, SKODA OCTAVIA (1Z3) 1.6 MultiFuel, SKODA OCTAVIA (1Z3) 1.4 TSI, SKODA OCTAVIA (1Z3) 1.2 TSI … View more
The steps may slightly vary depending on the car design.
SKODA OCTAVIA (1Z3) 1.6 LPG, SKODA OCTAVIA (1Z3) 1.4, SKODA OCTAVIA (1Z3) 1.6, SKODA OCTAVIA (1Z3) 1.6 FSI, SKODA OCTAVIA (1Z3) 1.4, SKODA OCTAVIA (1Z3) 1.6 MultiFuel, SKODA OCTAVIA (1Z3) 1.4 TSI, SKODA OCTAVIA (1Z3) 1.2 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Springs for OCTAVIA (1Z3) and other SKODA models
Coil spring
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: coil springs – SKODA OCTAVIA (1Z3). Professionals recommend:
- Both coil springs of the rear suspension should be replaced simultaneously.
- The replacement procedure is identical for the left and right coil springs of the rear suspension.
- All work should be done with the engine stopped.
Replacement: coil springs – SKODA OCTAVIA (1Z3). Use the following procedure:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: coil springs – SKODA OCTAVIA (1Z3). AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
- Step 7Make a mark on the camber adjustment bolt.
- Step 8Unscrew the arm fastening to the beam. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
- Step 9Support the arm. Use a hydraulic transmission jack.
- Step 10Remove the fastening bolt. Use a crowbar.
- Step 11Remove the support from under the arm.AUTODOC recommends:Replacement: coil springs – SKODA OCTAVIA (1Z3). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
- Step 12Take out the spring.
- Step 13Install the coil spring together with the rubber mounts into the mounting seats. Use a crowbar.
- Step 14Support the arm. Use a hydraulic transmission jack.
- Step 15Install the fastening bolt.AUTODOC recommends:Adjust the position of the alignment bolt according to the mark.
- Step 16Remove the support from under the arm.Replacement: coil springs – SKODA OCTAVIA (1Z3). Tip from AUTODOC experts:Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Octavia II Hatchback (1Z3) model
Popular maintenance tutorials for Skoda Octavia Mk2
Complete guides for changing the Springs on different SKODA OCTAVIA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA OCTAVIA (1Z3)
View more
- Coolant comparison test | AUTODOC
- The most common problems when buying a used car | AUTODOC
- How to Order Car Parts Online: Avoid These 5 Common Pitfalls
- TOP 5 mistakes during DIY oil change | AUTODOC tips
Most commonly replaced car parts on SKODA OCTAVIA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME