Important!

This replacement procedure can be used for:
BMW 3 Touring (E91) 325 i, BMW 3 Touring (E91) 318 d, BMW 3 Touring (E91) 318 i, BMW 3 Touring (E91) 320 i, BMW 3 Touring (E91) 325 i, BMW 3 Touring (E91) 330 i, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 330 d, BMW 3 Touring (E91) 318 d, BMW 3 Touring (E91) 318 i, BMW 3 Touring (E91) 335 i, BMW 3 Touring (E91) 335 d, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 318 i, BMW 3 Touring (E91) 318 d, BMW 3 Touring (E91) 320 i, BMW 3 Touring (E91) 330 i, BMW 3 Touring (E91) 325 i, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 330 d, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 335 i, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 320 i … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Springs for 3 Touring (E91) and other BMW models

Coil spring

        Coil spring for 3 Touring (E91) Petrol (211 hp)
      
        Coil spring for 3 Touring (E91) Diesel (136 hp)
      
        Coil spring for 3 Touring (E91) Petrol (136 hp)
      
        Coil spring for 3 Touring (E91) Petrol (150 hp)
      
        Coil spring for 3 Touring (E91) Petrol (218 hp)
      
        Coil spring for 3 Touring (E91) Petrol (258 hp)
      
        Coil spring for 3 Touring (E91) Diesel (163 hp)
      
        Coil spring for 3 Touring (E91) Diesel (231 hp)
      
        Coil spring for 3 Touring (E91) Diesel (122 hp)

Replacement: coil springs – BMW 3 Touring (E91). Tools you need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Combination spanner #18
                      
                        Drive socket # 17 
                      
                        Drive socket # 18 
                      
                        Drive socket # 21 
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Torque wrench
                      
                        Tap wrench
                      
                        Pin punch
                      
                        Rubber mallet
                      
                        Crow bar
                      
                        Strut spring compressor
                      
                        Hydraulic transmission jack
                      
                        Wheel chock

Buy tools

Replacement: coil springs – BMW 3 Touring (E91). Tip from AUTODOC experts:

Both coil springs of the rear suspension should be replaced simultaneously.
The replacement procedure is identical for the left and right coil springs of the rear suspension.
Please note: all work on the car – BMW 3 Touring (E91) – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the rear of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW 3 Touring (E91)
Step 5

Remove the wheel.
Step 6

Install the coil spring compressor on the coil spring.

Replacement: coil springs – BMW 3 Touring (E91). Professionals recommend:
Use adapters and jaws of the appropriate size. The sping coils should be securely fixed with the coil spring compressor. Use high quality coil spring compressors.
Step 7

Support the arm. Use a hydraulic transmission jack.
Step 8

Compress the spring.

Replacement: coil springs – BMW 3 Touring (E91). AUTODOC recommends:
Compress the coil spring compressor until there is enough room to remove the spring. Do not compress the tool to the full: the spring coils must not touch each other. Be careful. The compressed spring is powerful and in case of disrupting ties, straightening, it can cause injury.
Step 9

Unscrew the lower fastener of the shock absorber. Use a drive socket #17.
Step 10

Remove the support from under the arm.

AUTODOC recommends:
Replacement: coil springs – BMW 3 Touring (E91). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
Step 11

Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
Step 12

Make a mark on the camber adjustment bolt.
Step 13

Unscrew the fastener connecting the control arm to the rear subframe. Use a drive socket #18. Use a drive socket #21. Use a ratchet wrench. Use a tap wrench.
Step 14

Support the arm. Use a hydraulic transmission jack.
Step 15

Remove the fastening bolt. Use a pin punch. Use a rubber mallet.
Step 16

Lower the hydraulic transmission jack by 10-15 cm.

AUTODOC recommends:
BMW 3 Touring (E91) – Do not lower the transmission jack sharply to avoid damaging components and mechanisms of the car.
Step 17

Pull down the suspension control arm. Remove the coil spring together with the coil spring compressor.

Replacement: coil springs – BMW 3 Touring (E91). AUTODOC recommends:
While the spring is compressed, do not do any operations on it.
Step 18

Remove the rubber spring spacer.
Step 19

Release the coil spring.
Step 20

Remove the spring.
Step 21

Install a new coil spring on the coil spring compressor.

Replacement: coil springs – BMW 3 Touring (E91). Tip:
Use adapters and jaws of the appropriate size.
Step 22

Compress the spring.
Step 23

Install the rubber spacer on the new coil spring.
Step 24

Clean the coil spring mounting seats. Use a wire brush. Use WD-40 spray.
Step 25

Pull down the suspension control arm. Install the spring.

AUTODOC recommends:
Make sure that the coil spring is correctly positioned in its mounting seats.
Step 26

Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
Step 27

Support the arm. Use a hydraulic transmission jack.
Step 28

Install the fastening bolt. Use a crowbar.
Step 29

Remove the support from under the arm.

AUTODOC recommends:
Replacement: coil springs – BMW 3 Touring (E91). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
Step 30

Remove the coil spring compressor.
Step 31

Support the arm. Use a hydraulic transmission jack.
Step 32

Screw in the lower fastener of the shock absorber. Use a drive socket #17.
Step 33

Tighten the fastener connecting the control arm to the rear subframe. Use a combination spanner #18. Use a drive socket #21. Use a torque wrench. Tighten it to 165 nm torque.

AUTODOC recommends:
Important! Be sure to use new fasteners.
Step 34

Tighten the lower fastener of the shock absorber. Use a drive socket #17. Use a torque wrench. Tighten it to 60 Nm torque.
Step 35

Remove the support from under the arm.

AUTODOC recommends:
BMW 3 Touring (E91) – Do not lower the transmission jack sharply to avoid damaging components and mechanisms of the car.
Step 36

Treat all joints of the arm. Use copper grease.

Step 37

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 38

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
After applying the spray, wait a few minutes.
Step 39

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. BMW 3 Touring (E91)
Step 40

Screw in the wheel bolts. Use wheel impact socket #17.
Step 41

Lower the car and working in a cross order, tighten the wheel bolts. Use a torque wrench. Tighten it to 120 nm torque.
Step 42

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the BMW 3 Touring (E91) model.

Browse tyres

How to change front coil springs on BMW 3 Touring (E91) – replacement guide

Free download PDF
2.57 MB
How to change front suspension strut on BMW 3 Touring (E91) – replacement guide

Free download PDF
2.67 MB
How to change rear shock absorbers on BMW 3 Touring (E91) – replacement guide

Free download PDF
2.51 MB
How to change front brake pads on BMW 3 Touring (E91) – replacement guide

Free download PDF
1.54 MB
How to change rear brake pads on BMW 3 Touring (E91) – replacement guide

Free download PDF
1.48 MB
How to change rear brake discs on BMW 3 Touring (E91) – replacement guide

Free download PDF
2.18 MB

How to change front coil springs on BMW E90 – replacement guide

Free download PDF
2.79 MB
How to change rear coil springs on BMW E90 – replacement guide

Free download PDF
1.36 MB
How to change front coil springs on BMW E46 – replacement guide

Free download PDF
3.18 MB
How to change front brake caliper on BMW E46 – replacement guide

Free download PDF
2.08 MB
How to change rear coil springs on BMW E92 – replacement guide

Free download PDF
2.46 MB
How to change front coil springs on BMW E92 – replacement guide

Free download PDF
3.86 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

5 car interior cleaning mistakes | AUTODOC tips

6K views

Published on: 26/05/2022
DIY brake caliper restoration | AUTODOC tips

556K views

Published on: 02/06/2022
How to restore a damaged thread | AUTODOC tips

5K views

Published on: 04/05/2023
How to restore a steering wheel | AUTODOC tips

32K views

Published on: 17/02/2022