When to replace the Brake Shoes on your AUDI 100
Recommended replacement interval for the part category Brake Shoe Set : 100000 km
Important!
This replacement procedure can be used for:
AUDI 100 (43, C2) 2.0 D, AUDI 100 (43, C2) 2.1, AUDI 100 (43, C2) 2.1, AUDI 100 (43, C2) 2.0, AUDI 100 (43, C2) 1.9, AUDI 100 (43, C2) 1.6 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: brake shoes – AUDI 100 (43, C2). List of the tools you'll need:
Wire brush
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Combination spanner #10
Drive socket # 24
Wheel impact socket #17
Brake shoe retaining spring compressor
Flat screwdriver
Ratchet wrench
Hammer
Crow bar
Wheel chock
Replacement: brake shoes – AUDI 100 (43, C2). Tip from AUTODOC:
  • Replace brake shoes as a set on an axle. This will ensure efficient braking.
  • The replacement procedure is identical for brake shoes on the same axle.
  • Please note: all work on the car – AUDI 100 (43, C2) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Brake Shoes on Audi 100 Typ 43 1976 - free PDF and video manuals
    Engage the parking brake lever.
  2. Step 2
    How to replace AUDI 100 (43, C2) 2.1 1977 Brake Shoes - step-by-step manuals and video guides
    Loosen the parking brake cable. Use a combination spanner #10.
  3. Step 3
    Secure the wheels with chocks.
    Step 4
    Audi 100 Typ 43 1.6 1978 Brake Shoes replacement: free workshop manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  4. Step 5
    Raise the rear of the car and secure on supports.
    Step 6
    Changing Brake Shoes on AUDI 100 (43, C2) 2.0 D 1979 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI 100 (43, C2)
  5. Step 7
    How to remove AUDI 100 1.9 1980 Brake Shoes - online easy-to-follow instructions
    Remove the wheel.
  6. Step 8
    How to replace Brake Shoes on AUDI 100 (43, C2) 1981: download PDF manuals and video instructions
    Clean the brake drum. Use a wire brush. Use all-purpose cleaning spray.
  7. Step 9
    How hard is it to do yourself: Brake Shoes replacement on Audi 100 Typ 43 1.6 1982 - download illustrated guide
    Remove the wheel hub nut cap. Use a crowbar. Use a hammer.
  8. Step 10
    Need to know how to renew Brake Shoes on AUDI 100 1976? This free workshop manual will help you to do it yourself
    Remove the cotter pin securing the hub nut. Use a crowbar. Use a hammer.
  9. Step 11
    Changing of Brake Shoes on Audi 100 Typ 43 1977 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the hub nut. Use a drive socket #24. Use a ratchet wrench.
  10. Step 12
    AUDI 100 2.0 D Brake Shoes replacement: online guides and video tutorials
    Remove the brake drum assembled with the wheel hub bearing.
    Replacement: brake shoes – AUDI 100 (43, C2). Professionals recommend:
    Examine the brake drum. Replace it if necessary.
  11. Step 13
    Replacing Brake Shoes on Audi 100 Typ 43 1979 2.1 by yourself
    Clean the fasteners of the brake shoes. Use all-purpose cleaning spray.
  12. Step 14
    100 (43, C2) 1.9 1980 Brake Shoes DIY replacement workshop manual
    Remove the lower return spring of brake shoes. Use a crowbar.
  13. Step 15
    How to change Brake Shoes on AUDI 100 (43, C2) 1981 - tips and tricks
    Remove the retainers of the drum brake shoes. Use a brake shoe retaining spring compressor.
  14. Step 16
    Step-by-step recommendations for DIY replacement Audi 100 Typ 43 1982 1.9 Brake Shoes
    Remove the hold-down spring. Use a crowbar.
  15. Step 17
    DIY replacement of Brake Shoes on AUDI 100 (43, C2) 2.0 1976 is not an issue anymore with our step-by-step tutorial
    Disconnect the parking brake cable. Use a crowbar.
  16. Step 18
    How to change Brake Shoes on Audi 100 Typ 43 1976 - free PDF and video manuals
    Remove both shoes from the mounting bracket.
    Replacement: brake shoes – AUDI 100 (43, C2). Tip from AUTODOC experts:
    Don't press the brake pedal after removing the rear brake drum shoes. This will cause the piston to fall out of the brake cylinder, leakage of brake fluid and depressurization of the system.
  17. Step 19
    How to replace AUDI 100 (43, C2) 2.1 1977 Brake Shoes - step-by-step manuals and video guides
    Remove the upper spring and the adjuster. Use a flat screwdriver.
  18. Step 20
    Audi 100 Typ 43 1.6 1978 Brake Shoes replacement: free workshop manuals
    Remove the brake shoe adjuster lever.
  19. Step 21
    Changing Brake Shoes on AUDI 100 (43, C2) 2.0 D 1979 by yourself
    Install the brake shoe adjuster lever.
  20. Step 22
    How to remove AUDI 100 1.9 1980 Brake Shoes - online easy-to-follow instructions
    Install the upper retaining springs and adjustment mechanism on new brake shoes. Use a flat screwdriver.
  21. Step 23
    How to replace Brake Shoes on AUDI 100 (43, C2) 1981: download PDF manuals and video instructions
    Clean the mounting seats of the brake shoes. Use all-purpose cleaning spray.
  22. Step 24
    How hard is it to do yourself: Brake Shoes replacement on Audi 100 Typ 43 1.6 1982 - download illustrated guide
    Connect the parking brake cable to the parking brake lever.
  23. Step 25
    Need to know how to renew Brake Shoes on AUDI 100 1976? This free workshop manual will help you to do it yourself
    Install the brake shoes on the working brake cylinder on the bracket and on the brake-support plate bracket.
  24. Step 26
    Changing of Brake Shoes on Audi 100 Typ 43 1977 won't be an issue if you follow this illustrated step-by-step guide
    Install the retainers of the drum brake shoes. Use a brake shoe retaining spring compressor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI 100 C2 Saloon (43) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI 100 (43, C2) Brake Shoes replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI 100 (43, C2) Brake Shoes replacement - online guide
Tips & tricks for your AUDI 100 (43, C2)
View more
  • How to change Brake shoe set on AUDI 100 (43, C2) 2.0 - replacement tricks
    Things you should never do with an automatic transmission | AUTODOC tips
  • Changing Drum brake pads Audi 100 Typ 43 2.1 - Replacement Tips
    Causes of a worn car boot damper | AUTODOC
  • Maintenance Hacks - AUDI 100 (43, C2) 1.6 Brake shoe kits replacement guide
    How to remove rust | AUTODOC tips
  • Replace Drum brake shoe support pads on Audi 100 Typ 43 - free video tips
    Headlight Restoration | AUTODOC tips

Professional manuals for the most common AUDI models