Important!
This replacement procedure can be used for:
MERCEDES-BENZ CLC (CL203) CLC 160 (203.731), MERCEDES-BENZ CLC (CL203) CLC 220 CDI (203.708), MERCEDES-BENZ CLC (CL203) CLC 200 CDI (203.707), MERCEDES-BENZ CLC (CL203) CLC 350 (203.756), MERCEDES-BENZ CLC (CL203) CLC 230 (203.752), MERCEDES-BENZ CLC (CL203) CLC 200 Kompressor (203.741), MERCEDES-BENZ CLC (CL203) CLC 180 Kompressor (203.746) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: anti roll bar links – MERCEDES-BENZ CLC-CLASS (CL203). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #11
Combination spanner #16
Drive socket # E14
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Hydraulic transmission jack
Wheel chock
Replacement: anti roll bar links – MERCEDES-BENZ CLC-CLASS (CL203). Tip from AUTODOC experts:
  • Replace the stabiliser links on MERCEDES-BENZ CLC-CLASS (CL203) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – MERCEDES-BENZ CLC-CLASS (CL203). Use the following procedure:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on Mercedes CLC CL203 2008 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace MERCEDES-BENZ CLC (CL203) CLC 220 CDI 2.2 (203.708) 2009 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ CLC-CLASS (CL203)
  3. Step 5
    Mercedes CLC CL203 CLC 200 CDI 2.2 (203.707) 2010 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on MERCEDES-BENZ CLC (CL203) CLC 200 1.8 Kompressor (203.741) 2011 by yourself
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove MERCEDES-BENZ CLC CLC 160 1.6 (203.731) 2008 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #11. Use a drive socket #16. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on MERCEDES-BENZ CLC (CL203) 2009: download PDF manuals and video instructions
    Unscrew the fasteners connecting the stabilizer link to the steering knuckle. Use a drive socket #E14. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Mercedes CLC CL203 CLC 350 3.5 (203.756) 2010 - download illustrated guide
    Remove the stabilizer rod.
    Replacement: anti roll bar links – MERCEDES-BENZ CLC-CLASS (CL203). Professionals recommend:
    Examine stabiliser bushes. Replace them if needed.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on MERCEDES-BENZ CLC 2011? This free workshop manual will help you to do it yourself
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Anti Roll Bar Links on Mercedes CLC CL203 2008 won't be an issue if you follow this illustrated step-by-step guide
    Install a new rod, tighten the fasteners. Use a combination spanner #16. Use a drive socket #E14. Use a ratchet wrench.
  10. Step 12
    MERCEDES-BENZ CLC CLC 220 CDI (203.708) Anti Roll Bar Links replacement: online guides and video tutorials
    Support the rear control arm. Use a hydraulic transmission jack.
  11. Step 13
    Replacing Anti Roll Bar Links on Mercedes CLC CL203 2010 CLC 220 CDI 2.2 (203.708) by yourself
    Tighten the fasteners connecting the stabilizer link to the steering knuckle. Use a drive socket #E14. Use a torque wrench. Tighten it to 40 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ CLC (CL203) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ CLC (CL203) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ CLC (CL203) Anti Roll Bar Links replacement - online guide
Tips & tricks for your MERCEDES-BENZ CLC (CL203)
View more
  • How to change Drop links on MERCEDES-BENZ CLC (CL203) CLC 180 1.8 Kompressor (203.746) - replacement tricks
    Top 5 reasons why the suspension knocks | AUTODOC tips
  • Changing Stabilizer link Mercedes CLC CL203 CLC 220 CDI 2.2 (203.708) - Replacement Tips
    How to remove scratches from a car | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ CLC (CL203) CLC 200 CDI 2.2 (203.707) Sway bar link replacement guide
    How to save when buying car parts
  • Replace Drop link on Mercedes CLC CL203 - free video tips
    TOP 5 mistakes during DIY oil change | AUTODOC tips