Important!

This replacement procedure can be used for:
MERCEDES-BENZ CLC (CL203) CLC 180 Kompressor (203.746), MERCEDES-BENZ CLC (CL203) CLC 200 Kompressor (203.741), MERCEDES-BENZ CLC (CL203) CLC 230 (203.752), MERCEDES-BENZ CLC (CL203) CLC 350 (203.756), MERCEDES-BENZ CLC (CL203) CLC 200 CDI (203.707), MERCEDES-BENZ CLC (CL203) CLC 220 CDI (203.708), MERCEDES-BENZ CLC (CL203) CLC 250, MERCEDES-BENZ CLC (CL203) CLC 160 (203.731) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – MERCEDES-BENZ CLC-CLASS (CL203). Tools you might need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Torque wrench
                    
                      Combination spanner #7
                    
                      Combination spanner #17
                    
                      Drive socket # 16 
                    
                      Drive socket # 17 
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Wheel chock

Buy tools

Replacement: anti roll bar links – MERCEDES-BENZ CLC-CLASS (CL203). AUTODOC recommends:

Replace the stabiliser links on MERCEDES-BENZ CLC-CLASS (CL203) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Warning! Shut down the engine before starting any work – MERCEDES-BENZ CLC-CLASS (CL203).

Carry out replacement in the following order:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

Replacement: anti roll bar links – MERCEDES-BENZ CLC-CLASS (CL203). Tip:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #16. Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – MERCEDES-BENZ CLC-CLASS (CL203). Tip from AUTODOC:
Examine stabiliser bushes. Replace them if needed.
Step 10

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11

Install a new rod, tighten the fasteners. Use a combination spanner #17. Use a combination spanner #7. Use a drive socket #17. Use a ratchet wrench.
Step 12

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 60 Nm torque.
Step 13

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 60 Nm torque.
Step 14

Treat all joints of the stabiliser link. Use copper grease.
Step 15

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – MERCEDES-BENZ CLC-CLASS (CL203). After applying the spray, wait a few minutes.
Step 17

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. MERCEDES-BENZ CLC-CLASS (CL203)
Step 18

Screw in the wheel bolts. Use wheel impact socket #17.
Step 19

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 110 nm torque.
Step 20

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ CLC (CL203) model

Mercedes CLC CL203 tyre size

How to change front wheel bearing on MERCEDES-BENZ CLC (CL203) – replacement guide

Free download PDF
3.93 MB
How to change track rod end on MERCEDES-BENZ CLC (CL203) – replacement guide

Free download PDF
1.65 MB
How to change front strut mount on MERCEDES-BENZ CLC (CL203) – replacement guide

Free download PDF
3.38 MB
How to change rear anti roll bar links on MERCEDES-BENZ CLC (CL203) – replacement guide

Free download PDF
1.37 MB
How to change front lower arm on MERCEDES-BENZ CLC (CL203) – replacement guide

Free download PDF
1.64 MB
How to change rear lower arm on MERCEDES-BENZ CLC (CL203) – replacement guide

Free download PDF
1.29 MB

How to change rear anti roll bar links on MERCEDES-BENZ CLC (CL203) – replacement guide

Free download PDF
1.37 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change rear anti roll bar links on Mercedes W245 – replacement guide

Free download PDF
1.3 MB
How to change front anti roll bar links on Mercedes W245 – replacement guide

Free download PDF
1.36 MB
How to change rear anti roll bar links on Mercedes W204 – replacement guide

Free download PDF
1.41 MB
How to change front anti roll bar links on Mercedes W204 – replacement guide

Free download PDF
1.25 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC

4K views

Published on: 01/04/2021
What to do if your car’s bonnet won’t open | AUTODOC tips

18K views

Published on: 12/09/2024
How to replace a timing chain yourself

21K views

Published on: 12/12/2024
When, why, and how to change engine oil | AUTODOC tips

7K views

Published on: 16/08/2024