Disclaimer
How to change rear anti roll bar links on MERCEDES-BENZ C-Class T-modell (S202) – replacement guide
downloads:
0
Views:
3
Important!
This replacement procedure can be used for:
MERCEDES-BENZ C-Class T-modell (S202) C 180 T (202.078), MERCEDES-BENZ C-Class T-modell (S202) C 200 T (202.080), MERCEDES-BENZ C-Class T-modell (S202) C 220 T D (202.182), MERCEDES-BENZ C-Class T-modell (S202) C 250 T Turbo-D (202.188), MERCEDES-BENZ C-Class T-modell (S202) C 230 T (202.083), MERCEDES-BENZ C-Class T-modell (S202) C 200 T D (202.180), MERCEDES-BENZ C-Class T-modell (S202) C 230 T Kompressor (202.085), MERCEDES-BENZ C-Class T-modell (S202) C 240 T (202.086), MERCEDES-BENZ C-Class T-modell (S202) C 280 T (202.089), MERCEDES-BENZ C-Class T-modell (S202) C 220 T CDI (202.193), MERCEDES-BENZ C-Class T-modell (S202) C 200 T Kompressor (202.082), MERCEDES-BENZ C-Class T-modell (S202) C 200 T CDI (202.194), MERCEDES-BENZ C-Class T-modell (S202) C 220 T D (202.182), MERCEDES-BENZ C-Class T-modell (S202) C 43 AMG (202.093), MERCEDES-BENZ C-Class T-modell (S202) C 180 T (202.081), MERCEDES-BENZ C-Class T-modell (S202) C 200 T Kompressor (202.087), MERCEDES-BENZ C-Class T-modell (S202) C 240 T (202.088) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ C-Class T-modell (S202) C 180 T (202.078), MERCEDES-BENZ C-Class T-modell (S202) C 200 T (202.080), MERCEDES-BENZ C-Class T-modell (S202) C 220 T D (202.182), MERCEDES-BENZ C-Class T-modell (S202) C 250 T Turbo-D (202.188), MERCEDES-BENZ C-Class T-modell (S202) C 230 T (202.083), MERCEDES-BENZ C-Class T-modell (S202) C 200 T D (202.180), MERCEDES-BENZ C-Class T-modell (S202) C 230 T Kompressor (202.085), MERCEDES-BENZ C-Class T-modell (S202) C 240 T (202.086), MERCEDES-BENZ C-Class T-modell (S202) C 280 T (202.089), MERCEDES-BENZ C-Class T-modell (S202) C 220 T CDI (202.193), MERCEDES-BENZ C-Class T-modell (S202) C 200 T Kompressor (202.082), MERCEDES-BENZ C-Class T-modell (S202) C 200 T CDI (202.194), MERCEDES-BENZ C-Class T-modell (S202) C 220 T D (202.182), MERCEDES-BENZ C-Class T-modell (S202) C 43 AMG (202.093), MERCEDES-BENZ C-Class T-modell (S202) C 180 T (202.081), MERCEDES-BENZ C-Class T-modell (S202) C 200 T Kompressor (202.087), MERCEDES-BENZ C-Class T-modell (S202) C 240 T (202.088) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for C-Class T-modell (S202) and other MERCEDES-BENZ models
Alternative products

Wire brush
WD-40 spray
Copper grease
Brake cleaner
High-temperature ceramic grease
Torque wrench
Drive socket # 10
Drive socket # 13
Combination spanner #13
Combination spanner #17
Combination spanner #19
Wheel impact socket #17
Ratchet wrench
Crow bar
Wheel chock
Replacement: anti roll bar links – MERCEDES-BENZ C-CLASS Estate (S202). AUTODOC recommends:
- Replace the stabiliser links on MERCEDES-BENZ C-CLASS Estate (S202) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – MERCEDES-BENZ C-CLASS Estate (S202). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – MERCEDES-BENZ C-CLASS Estate (S202). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Unscrew the fasteners of the control arm plastic cover. Use a drive socket #10. Use a ratchet wrench. - Step 7
Remove the control arm plastic cover. - Step 8
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 9
Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #13. Use a drive socket #13. Use a ratchet wrench. - Step 10
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a combination spanner #19. - Step 11
Remove the stabilizer rod. - Step 12Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.Step 13
Install a new rod, tighten the fasteners. Use a crowbar. - Step 14
Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a combination spanner #19. Use a torque wrench. Tighten it to 30 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ C-Class T-modell (S202) model
Popular maintenance tutorials for Mercedes S202
Complete guides for changing the Drop links on different MERCEDES-BENZ C-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ C-Class T-modell (S202)
View more
K2 ROTON wheel cleaner overview
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
7 signs of faulty fuel injectors | AUTODOC tips
DIY starter repair | AUTODOC tips
Most commonly replaced car parts on MERCEDES-BENZ C-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























