How to change rear anti roll bar links on MERCEDES-BENZ C-Class Coupe (C204) – replacement guide
MERCEDES-BENZ C-Class Coupe (C204) C 63 AMG (204.377), MERCEDES-BENZ C-Class Coupe (C204) C 63 AMG (204.377), MERCEDES-BENZ C-Class Coupe (C204) C 220 CDI (204.302), MERCEDES-BENZ C-Class Coupe (C204) C 250 CDI (204.303), MERCEDES-BENZ C-Class Coupe (C204) C 180 (204.349), MERCEDES-BENZ C-Class Coupe (C204) C 250 (204.347), MERCEDES-BENZ C-Class Coupe (C204) C 350 (204.357), MERCEDES-BENZ C-Class Coupe (C204) C 63 AMG (204.377), MERCEDES-BENZ C-Class Coupe (C204) C 63 AMG (204.377), MERCEDES-BENZ C-Class Coupe (C204) C 200 CGI (204.348), MERCEDES-BENZ C-Class Coupe (C204) C 180 (204.331), MERCEDES-BENZ C-Class Coupe (C204) C 220 CDI (204.302), MERCEDES-BENZ C-Class Coupe (C204) C 350 4-matic (204.388) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
Anti-roll bar link
- Replace the stabiliser links on MERCEDES-BENZ C-CLASS Coupe (C204) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – MERCEDES-BENZ C-CLASS Coupe (C204) – should be done with the engine switched off.
- Step 1
Secure the wheels with chocks.
Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3
Raise the car.
Replacement: anti roll bar links – MERCEDES-BENZ C-CLASS Coupe (C204). AUTODOC experts recommend:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
Step 4
Unscrew the wheel bolts.
AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ C-CLASS Coupe (C204)
- Step 5
Remove the wheel.
- Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7
Unscrew the fastener connecting the stabilizer link to the control arm. Use a drive socket #13. Use Torx E12. Use a ratchet wrench.
- Step 8
Remove the fastening bolt.
- Step 9
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a combination spanner #22.
- Step 10
Remove the stabilizer rod.
AUTODOC recommends:Examine stabiliser bushes. Replace them if needed.
- Step 11
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 12
Ιnstall the transverse stabilizer link.
- Step 13
Support the rear knuckle. Use a hydraulic transmission jack.
Replacement: anti roll bar links – MERCEDES-BENZ C-CLASS Coupe (C204). AUTODOC recommends:For tightening the fasteners correctly, you have to jack up the suspension components to their working position.
- Step 14
Install the fastening bolt.
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ C-Class Coupe (C204) model
Popular maintenance tutorials for Mercedes C204
Free download PDF 5.79 MB
Free download PDF 1.64 MB
Free download PDF 1.96 MB
Free download PDF 1.25 MB
Free download PDF 1.58 MB
Free download PDF 1.81 MB
Complete guides for changing the Drop links on different MERCEDES-BENZ C-CLASS models
Free download PDF 1.25 MB
Free download PDF 1.41 MB
Free download PDF 1.34 MB
Free download PDF 1.27 MB
Free download PDF 1.26 MB
Free download PDF 1.37 MB
Track expenses, manage logs, schedule replacements, and more.
What to do if the ABS light comes on: DIY Diagnostics Tips
Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
How to remove scratches from car plastic | AUTODOC tips
#TPMS Explained: Why Your Light is On and How to Respond Safely
Most commonly replaced car parts on MERCEDES-BENZ C-CLASS
