Important!
This replacement procedure can be used for:
MERCEDES-BENZ C-Class Coupe (C204) C 63 AMG (204.377), MERCEDES-BENZ C-Class Coupe (C204) C 220 CDI (204.302), MERCEDES-BENZ C-Class Coupe (C204) C 250 CDI (204.303), MERCEDES-BENZ C-Class Coupe (C204) C 180 (204.349), MERCEDES-BENZ C-Class Coupe (C204) C 250 (204.347), MERCEDES-BENZ C-Class Coupe (C204) C 350 (204.357), MERCEDES-BENZ C-Class Coupe (C204) C 63 AMG (204.377), MERCEDES-BENZ C-Class Coupe (C204) C 63 AMG (204.377), MERCEDES-BENZ C-Class Coupe (C204) C 200 CGI (204.348), MERCEDES-BENZ C-Class Coupe (C204) C 180 (204.331), MERCEDES-BENZ C-Class Coupe (C204) C 220 CDI (204.302) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for C-Class Coupe (C204) and other MERCEDES-BENZ models
Alternative products
How to change Anti-roll bar link on Mercedes C204 C 220 CDI 2.2 (204.302) – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – MERCEDES-BENZ C-CLASS Coupe (C204). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Ceramic grease
Copper grease
Torque wrench
Combination spanner #18
Drive socket # 18
Drive socket # 19
Torx bit T40
Wheel impact socket #17
Ratchet wrench
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on MERCEDES-BENZ C-CLASS Coupe (C204) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – MERCEDES-BENZ C-CLASS Coupe (C204) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on Mercedes C204 2011 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the car.
    Replacement: anti roll bar links – MERCEDES-BENZ C-CLASS Coupe (C204). Tip from AUTODOC:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace MERCEDES-BENZ C-Class Coupe (C204) C 220 CDI 2.2 (204.302) 2012 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ C-CLASS Coupe (C204)
  3. Step 5
    Mercedes C204 C 250 CDI 2.2 (204.303) 2013 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on MERCEDES-BENZ C-Class Coupe (C204) C 180 1.6 (204.331) 2014 by yourself
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove MERCEDES-BENZ C-CLASS C 350 3.5 (204.357) 2015 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use Torx T40.
  6. Step 8
    How to replace Anti Roll Bar Links on MERCEDES-BENZ C-Class Coupe (C204) 2016: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #18. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on Mercedes C204 C 63 AMG 6.2 (204.377) 2017 - download illustrated guide
    Remove the stabilizer rod.
    Replacement: anti roll bar links – MERCEDES-BENZ C-CLASS Coupe (C204). Tip:
    Examine stabiliser bushes. Replace them if needed.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on MERCEDES-BENZ C-CLASS 2018? This free workshop manual will help you to do it yourself
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Anti Roll Bar Links on Mercedes C204 2019 won't be an issue if you follow this illustrated step-by-step guide
    Ιnstall the transverse stabilizer link.
  10. Step 12
    MERCEDES-BENZ C-CLASS C 220 CDI 2.2 (204.302) Anti Roll Bar Links replacement: online guides and video tutorials
    Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #19. Use a torque wrench. Tighten it to 98 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ C-Class Coupe (C204) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY MERCEDES-BENZ C-Class Coupe (C204) Anti Roll Bar Links replacement - online guide
Tips & tricks for your MERCEDES-BENZ C-Class Coupe (C204)
View more
  • How to change Drop links on MERCEDES-BENZ C-Class Coupe (C204) C 180 1.8 (204.349) - replacement tricks
    7 signs of faulty fuel injectors | AUTODOC tips
  • Changing Stabilizer link Mercedes C204 C 220 CDI 2.2 (204.302) - Replacement Tips
    Motorcycle fuel tank restoration
  • Maintenance Hacks - MERCEDES-BENZ C-Class Coupe (C204) C 250 CDI 2.2 (204.303) Sway bar link replacement guide
    5 reasons why your car is making a knocking sound
  • Replace Drop link on Mercedes C204 - free video tips
    The most common problems when buying a used car | AUTODOC
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
MERCEDES-BENZ C-Class Coupe (C204) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME