Important!
This replacement procedure can be used for:
AUDI Q3 (8UB, 8UG) 2.0 TDI quattro, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TDI quattro, AUDI Q3 (8UB, 8UG) 2.0 TDI quattro, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) RS 2.5 quattro, AUDI Q3 (8UB, 8UG) 1.4 TSI, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TDI quattro, AUDI Q3 (8UB, 8UG) 2.0 TDI quattro, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro, AUDI Q3 (8UB, 8UG) RS 2.5 quattro, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TFSI, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) RS performance 2.5 quattro, AUDI Q3 (8UB, 8UG) 1.4 TFSI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Q3 (8UB, 8UG) and other AUDI models
Alternative products
How to change Anti-roll bar link on Audi Q3 8u 2.0 TDI – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – AUDI Q3 (8U). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #14
Combination spanner #16
HEX bit No.H5.
XZN socket bit # 6
Drive socket # 14
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
Replacement: anti roll bar links – AUDI Q3 (8U). AUTODOC recommends:
  • Replace the stabiliser links on AUDI Q3 (8U) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – AUDI Q3 (8U). Use the following procedure:
  1. Step 1
    How to change Anti Roll Bar Links on Audi Q3 8u 2011 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI Q3 (8UB, 8UG) 2.0 TDI 2012 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Audi Q3 8u 2.0 TDI quattro 2013 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – AUDI Q3 (8U). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Anti Roll Bar Links on AUDI Q3 (8UB, 8UG) 1.4 TSI 2014 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI Q3 2.0 TDI 2015 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on AUDI Q3 (8UB, 8UG) 2016: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Audi Q3 8u 2.0 TFSI quattro 2017 - download illustrated guide
    Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on AUDI Q3 2018? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – AUDI Q3 (8U). Tip from AUTODOC experts:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Changing of Anti Roll Bar Links on Audi Q3 8u 2019 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 11
    AUDI Q3 2.0 TDI Anti Roll Bar Links replacement: online guides and video tutorials
    Ιnstall the transverse stabilizer link.
  11. Step 12
    Replacing Anti Roll Bar Links on Audi Q3 8u 2011 2.0 TDI by yourself
    Tighten the stabiliser link fastener. Use a combination spanner #14. Use HEX No.H5. Use a ratchet wrench.
  12. Step 13
    Q3 (8UB, 8UG) 2.0 TDI 2012 Anti Roll Bar Links DIY replacement workshop manual
    Tighten the fastener connecting the stabilizer bar with the control arm. Use a drive socket #14. Use a torque wrench. Tighten it to 45 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the AUDI Q3 (8UB, 8UG) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY AUDI Q3 (8UB, 8UG) Anti Roll Bar Links replacement - online guide
Tips & tricks for your AUDI Q3 (8UB, 8UG)
View more
  • How to change Drop links on AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro - replacement tricks
    Deep interior cleaning | Car transformation by detailing
  • Changing Stabilizer link Audi Q3 8u 2.0 TDI - Replacement Tips
    Top 5 brake repair mistakes | AUTODOC tips
  • Maintenance Hacks - AUDI Q3 (8UB, 8UG) 2.0 TDI quattro Sway bar link replacement guide
    Save Money on Fuel with These Easy Tips | AUTODOC
  • Replace Drop link on Audi Q3 8u - free video tips
    How to align the timing marks correctly on an EA888 engine

Professional manuals for the most common AUDI models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
AUDI Q3 (8UB, 8UG) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME