Disclaimer
How to change rear anti roll bar links on ALFA ROMEO Brera (939_) – replacement guide
downloads:
0
Views:
7
Important!
This replacement procedure can be used for:
ALFA ROMEO Brera (939_) 2.0 JTDM (939DXQ1B), ALFA ROMEO Brera (939_) 2.2 JTS (939.DXB11), ALFA ROMEO Brera (939_) 3.2 JTS Q4 (939.DXG22), ALFA ROMEO Brera (939_) 2.4 JTDM 20V (939DXD1B, 939DXD12), ALFA ROMEO Brera (939_) 2.4 JTDM 20V (939DXD1B, 939DXM1B), ALFA ROMEO Brera (939_) 3.2 JTS (939DXG2B, 939DXG1B), ALFA ROMEO Brera (939_) 1.8 TBi (939DXN1B), ALFA ROMEO Brera (939_) 2.0 JTDM (939DXP1B) … View more
The steps may slightly vary depending on the car design.
ALFA ROMEO Brera (939_) 2.0 JTDM (939DXQ1B), ALFA ROMEO Brera (939_) 2.2 JTS (939.DXB11), ALFA ROMEO Brera (939_) 3.2 JTS Q4 (939.DXG22), ALFA ROMEO Brera (939_) 2.4 JTDM 20V (939DXD1B, 939DXD12), ALFA ROMEO Brera (939_) 2.4 JTDM 20V (939DXD1B, 939DXM1B), ALFA ROMEO Brera (939_) 3.2 JTS (939DXG2B, 939DXG1B), ALFA ROMEO Brera (939_) 1.8 TBi (939DXN1B), ALFA ROMEO Brera (939_) 2.0 JTDM (939DXP1B) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for Brera (939_) and other ALFA ROMEO models
Anti-roll bar link
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Copper grease
Combination spanner #18
Drive socket # 18
HEX bit No.H6
Wheel impact socket #17
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on ALFA ROMEO BRERA in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – ALFA ROMEO BRERA. Recommended sequence of steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. ALFA ROMEO BRERA - Step 5
Remove the wheel. - Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.Step 7
Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #18. - Step 8
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a combination spanner #18. Use HEX No.H6. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – ALFA ROMEO BRERA. Professionals recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Install a new rod, tighten the fasteners. Use a combination spanner #18. Use HEX No.H6.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the ALFA ROMEO Brera (939) model
Popular maintenance tutorials for Alfa Romeo Brera
Free download PDF
3.64 MB
Free download PDF2.4 MB
Free download PDF3.52 MB
Free download PDF1.48 MB
Free download PDF1.89 MB
Free download PDF1.57 MB
Complete guides for changing the Drop links on different ALFA ROMEO BRERA models
- Free download PDF1.48 MB
Free download PDF972.8 KB
Free download PDF1.52 MB
Free download PDF1.45 MB
Free download PDF1.52 MB
Free download PDF1.36 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your ALFA ROMEO Brera (939_)
View more
5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
Regain Your Confidence on the Road: Easy Headlight Restoration Tips
How to unlock your car without a key | AUTODOC tips
DIY vehicle AC compressor restoration
Most commonly replaced car parts on ALFA ROMEO BRERA
Time to replace parts? Get even better deals in our Shop app.
SCAN ME