Disclaimer
How to change rear ABS sensor on VW Jetta Mk6 (162, 163, AV3, AV2) – replacement guide
downloads:
12
Views:
435
Important!
This replacement procedure can be used for:
VW Jetta IV (162, 163, AV3, AV2) 1.2 TSI, VW Jetta IV (162, 163, AV3, AV2) 1.6 TDI, VW Jetta IV (162, 163, AV3, AV2) 2.0 TDI, VW Jetta IV (162, 163, AV3, AV2) 1.4 TSI, VW Jetta IV (162, 163, AV3, AV2) 2.0 TDI, VW Jetta IV (162, 163, AV3, AV2) 1.4 TSI, VW Jetta IV (162, 163, AV3, AV2) 1.6, VW Jetta IV (162, 163, AV3, AV2) 1.4 TSI, VW Jetta IV (162, 163, AV3, AV2) 2.0 TDI, VW Jetta IV (162, 163, AV3, AV2) 1.4 TSI, VW Jetta IV (162, 163, AV3, AV2) 1.2 TSI 16V, VW Jetta IV (162, 163, AV3, AV2) 1.6, VW Jetta IV (162, 163, AV3, AV2) 1.6 MPi … View more
The steps may slightly vary depending on the car design.
VW Jetta IV (162, 163, AV3, AV2) 1.2 TSI, VW Jetta IV (162, 163, AV3, AV2) 1.6 TDI, VW Jetta IV (162, 163, AV3, AV2) 2.0 TDI, VW Jetta IV (162, 163, AV3, AV2) 1.4 TSI, VW Jetta IV (162, 163, AV3, AV2) 2.0 TDI, VW Jetta IV (162, 163, AV3, AV2) 1.4 TSI, VW Jetta IV (162, 163, AV3, AV2) 1.6, VW Jetta IV (162, 163, AV3, AV2) 1.4 TSI, VW Jetta IV (162, 163, AV3, AV2) 2.0 TDI, VW Jetta IV (162, 163, AV3, AV2) 1.4 TSI, VW Jetta IV (162, 163, AV3, AV2) 1.2 TSI 16V, VW Jetta IV (162, 163, AV3, AV2) 1.6, VW Jetta IV (162, 163, AV3, AV2) 1.6 MPi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – ABS Sensor for Jetta IV (162, 163, AV3, AV2) and other VW models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Electronic spray
Multipurpose grease
Brake cleaner
Copper grease
Torque wrench
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Crow bar
Wheel chock
Replacement: ABS sensor – VW JETTA IV (162, 163). Professionals recommend:
- All work should be done with the engine stopped.
Replacement: ABS sensor – VW JETTA IV (162, 163). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW JETTA IV (162, 163) - Step 5
Remove the wheel. - Step 6
Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray. Use all-purpose cleaning spray. - Step 7
Unscrew the ABS sensor fastener. Use HEX No.H5. Use a ratchet wrench. - Step 8
Disconnect the ABS sensor. - Step 9
Detach the ABS sensor connector. - Step 10
Treat the ABS sensor connector. Use dielectric grease. - Step 11
Clean the ABS sensor mounting seat. Use a wire brush. Use WD-40 spray. - Step 12
Attach the ABS sensor connector. - Step 13
Treat the ABS sensor fastener. Use a multipurpose grease. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Jetta Mk6 (162, 163, AV3, AV2) model
Popular maintenance tutorials for VW Jetta mk6
Complete guides for changing the Wheel speed sensor on different VW JETTA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Jetta IV (162, 163, AV3, AV2)
View more
5 causes of turbocharger failure and how to avoid them
Top 5 brake repair mistakes | AUTODOC tips
TOP 6 WD-40 lifehacks | AUTODOC tips
3 essential tips for choosing summer tyres | Get ready for warmer weather
Most commonly replaced car parts on VW JETTA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























