
Disclaimer
How to change rear ABS sensor on Honda Civic 8 – replacement guide
downloads:
13
Views:
451
Important!
This replacement procedure can be used for:
HONDA CIVIC VIII Hatchback (FN, FK) 2.0 i-VTEC Type R (FN2), HONDA CIVIC VIII Hatchback (FN, FK) 1.4 (FK1, FN4), HONDA CIVIC VIII Hatchback (FN, FK) Type R (FN2), HONDA CIVIC VIII Hatchback (FN, FK) 2.2 CTDi (FK3), HONDA CIVIC VIII Hatchback (FN, FK) 1.4 (FK1) … View more
The steps may slightly vary depending on the car design.
HONDA CIVIC VIII Hatchback (FN, FK) 2.0 i-VTEC Type R (FN2), HONDA CIVIC VIII Hatchback (FN, FK) 1.4 (FK1, FN4), HONDA CIVIC VIII Hatchback (FN, FK) Type R (FN2), HONDA CIVIC VIII Hatchback (FN, FK) 2.2 CTDi (FK3), HONDA CIVIC VIII Hatchback (FN, FK) 1.4 (FK1) … View more
The steps may slightly vary depending on the car design.
How to change rear ABS sensor on HONDA CIVIC 8 [TUTORIAL AUTODOC]

All the parts you need to replace – ABS Sensor for CIVIC VIII Hatchback (FN, FK) and other HONDA models
ABS sensor
Alternative products

Wire brush
Nylon cleaning brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Dielectric grease
Multipurpose grease
Ceramic grease
Torque wrench
Drive socket # 10
Wheel impact socket #19
Ratchet wrench
Tap wrench
Clip removal tool
Flat screwdriver
Long nose pliers
Universal puller
Wheel chock
Replacement: ABS sensor – Honda Civic 8. AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: ABS sensor – Honda Civic 8. Take the following steps:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel bolts. Use wheel impact socket #19. Use a tap wrench.
- Step 3Raise the car.Replacement: ABS sensor – Honda Civic 8. Tip:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
- Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Honda Civic 8
- Step 5Remove the wheel.
- Step 6Disconnect the ABS sensor wiring. Use a clip removal tool. Use a flat screwdriver.
- Step 7Clean the ABS sensor connector. Use a nylon cleaning brush.
- Step 8Detach the ABS sensor connector.
- Step 9Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray.
- Step 10Unscrew the ABS sensor fastener. Use a drive socket #10. Use a ratchet wrench.
- Step 11Remove the fastening bolt.
- Step 12Remove the ABS sensor. Use long nose pliers.
- Step 13Clean the mounting seat of the ABS sensor. Use a wire brush. Use all-purpose cleaning spray.
- Step 14Treat the ABS sensor connector. Use dielectric grease.
- Step 15Treat the mounting seat of the ABS sensor. Use a multipurpose grease.
- Step 16Install the ABS sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the HONDA Civic VIII Hatchback (FN, FK) model
Popular maintenance tutorials for Honda Civic Mk8
Complete guides for changing the Wheel speed sensor on different HONDA CIVIC models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your HONDA CIVIC VIII Hatchback (FN, FK)
View more
- TOP 6 WD-40 lifehacks | AUTODOC tips
- Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
- #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
- TOP 8 mistakes car owners make | AUTODOC tips
Most commonly replaced car parts on HONDA CIVIC
Time to replace parts? Get even better deals in our Shop app.

SCAN ME