
Disclaimer
How to change mass air flow sensor on MERCEDES-BENZ CLK (C208) – replacement guide
downloads:
3
Views:
135
Important!
This replacement procedure can be used for:
MERCEDES-BENZ CLK (C208) CLK 320 (208.365) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ CLK (C208) CLK 320 (208.365) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Mass Air Flow Sensor for CLK (C208) and other MERCEDES-BENZ models
Mass air flow sensor
Alternative products

Electronic spray
Crow bar
Microfibre towel
Fender cover
Replacement: mass air flow sensor – MERCEDES-BENZ CLK (C208). AUTODOC experts recommend:
- Сlear the trouble codes from the electronic control unit if necessary.
- Make sure that no dust or dirt gets into the air duct components and the throttle body.
- All work should be done with the engine stopped.
Replacement: mass air flow sensor – MERCEDES-BENZ CLK (C208). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Remove the engine cover.AUTODOC recommends:Replacement: mass air flow sensor – MERCEDES-BENZ CLK (C208). Do not use excessive force when removing the part as this may damage it.
- Step 4Remove the air intake hoses.
- Step 5Clean the air filter cover and housing.
- Step 6Remove the air filter housing.AUTODOC recommends:Replacement: mass air flow sensor – MERCEDES-BENZ CLK (C208). Do not use excessive force when removing the part as this may damage it.
- Step 7Detach the mass air flow sensor connector.
- Step 8Release the mass air flow sensor retaining clips. Use a crowbar.
- Step 9Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system.
- Step 10Clean the mounting seat of the mass air flow sensor.
- Step 11Remove the microfibre towel from the throttle body.
- Step 12Release the mass air flow sensor retaining clips. Use a crowbar.
- Step 13Remove the mass air flow sensor.
- Step 14Install a new mass air flow sensor. Make sure you hear a click indicating that it is locked in place.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ CLK Coupe (C208) model
Popular maintenance tutorials for CLK C208
Complete guides for changing the MAF sensor on different MERCEDES-BENZ CLK models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ CLK (C208)
View more
- How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
- Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
- Checking the starter without removing it | AUTODOC tips
- Engine Overheating? Replace Your Cooling Fan to Fix It
Most commonly replaced car parts on MERCEDES-BENZ CLK
Time to replace parts? Get even better deals in our Shop app.

SCAN ME