How to carry out replacement: Lambda Sensor 2.0 CDTI (69) VAUXHALL INSIGNIA Mk I (A) Saloon
Disclaimer
Change VAUXHALL INSIGNIA Mk I (A) Saloon 2.0 Biturbo CDTI 4x4 (69) Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on VAUXHALL Insignia Mk I (A) Saloon (G09) – replacement guide

downloads: 16
Views: 108
Download your free tutorial and fix VAUXHALL Insignia Mk I (A) Saloon (G09) 1.8 (69) problems yourself Download for free 808.96 KB Lambda Sensor for VAUXHALL INSIGNIA Mk I (A) Saloon Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your VAUXHALL INSIGNIA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
VAUXHALL Insignia Mk I (A) Saloon (G09) 1.4 LPG (69), VAUXHALL Insignia Mk I (A) Saloon (G09) 2.0 Turbo 4x4 (69), VAUXHALL Insignia Mk I (A) Saloon (G09) 2.0 Turbo (69), VAUXHALL Insignia Mk I (A) Saloon (G09) 1.4 (69) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Insignia Mk I (A) Saloon (G09) and other VAUXHALL models
Alternative products
How to change Lambda sensor on VAUXHALL INSIGNIA Mk I (A) Saloon 2.0 CDTI (69) – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – VAUXHALL INSIGNIA Mk I (A) Saloon. List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Buy tools
Replacement: lambda sensor – VAUXHALL INSIGNIA Mk I (A) Saloon. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – VAUXHALL INSIGNIA Mk I (A) Saloon – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on VAUXHALL INSIGNIA Mk I (A) Saloon 2008 - free PDF and video manuals
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace VAUXHALL Insignia Mk I (A) Saloon (G09) 2.0 CDTI (69) 2009 Lambda Sensor - step-by-step manuals and video guides
    Detach the oxygen sensor connector.
  3. Step 6
    VAUXHALL INSIGNIA Mk I (A) Saloon 1.6 CDTi (69) 2010 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a flare nut spanner #22.
  4. Step 7
    Changing Lambda Sensor on VAUXHALL Insignia Mk I (A) Saloon (G09) 2.0 Biturbo CDTI 4x4 (69) 2011 by yourself
    Remove the oxygen sensor.
  5. Step 8
    How to remove VAUXHALL INSIGNIA 2.0 Turbo (69) 2012 Lambda Sensor - online easy-to-follow instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  6. Step 9
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 10
    How to replace Lambda Sensor on VAUXHALL Insignia Mk I (A) Saloon (G09) 2013: download PDF manuals and video instructions
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Insignia Mk1 (A) Saloon (G09) model

VAUXHALL INSIGNIA Mk I (A) Saloon tyre size

Popular maintenance tutorials for VAUXHALL INSIGNIA Mk I (A) Saloon

More manuals for VAUXHALL INSIGNIA Mk I (A) Saloon

Complete guides for changing the Oxygen sensor on different VAUXHALL INSIGNIA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VAUXHALL Insignia Mk I (A) Saloon (G09) Lambda Sensor replacement - online guide
Tips & tricks for your VAUXHALL Insignia Mk I (A) Saloon (G09)
View more
  • How to change Oxygen sensor on VAUXHALL Insignia Mk I (A) Saloon (G09) 1.8 (69) - replacement tricks
    Why Checking Your Oil is Crucial for Engine Performance
    6K views
    Published on: 23/02/2023
  • Changing O2 sensor VAUXHALL INSIGNIA Mk I (A) Saloon 2.0 CDTI (69) - Replacement Tips
    How to easily repair a punctured tyre | AUTODOC tips
    3K views
    Published on: 25/02/2021
  • Maintenance Hacks - VAUXHALL Insignia Mk I (A) Saloon (G09) 1.6 CDTi (69) NOx sensor replacement guide
    How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
    5K views
    Published on: 04/03/2021
  • Replace Lambda sensors on VAUXHALL INSIGNIA Mk I (A) Saloon - free video tips
    Why Is the Windscreen Washer Not Spraying? Solution
    3K views
    Published on: 25/04/2025

Most commonly replaced car parts on VAUXHALL INSIGNIA

Professional manuals for the most common VAUXHALL models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VAUXHALL Insignia Mk I (A) Saloon (G09) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME