When to replace the Lambda Sensor on your SEAT AROSA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
SEAT AROSA (6H) 1.0, SEAT AROSA (6H) 1.4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for AROSA (6H) and other SEAT models
Tools
Replacement: lambda sensor – SEAT AROSA (6H). List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
22-mm oxygen sensor socket
Thread tap
Ratchet wrench
Replacement: lambda sensor – SEAT AROSA (6H). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – SEAT AROSA (6H) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Lift the car using a jack or place it over an inspection pit.
    Step 2
    How to change Lambda Sensor on Seat Arosa 6h 1997 - free PDF and video manuals
    Unscrew the fasteners of the oxygen sensor housing cover. Use a drive socket #10. Use a ratchet wrench.
  2. Step 3
    How to replace SEAT AROSA (6H) 1.0 1998 Lambda Sensor - step-by-step manuals and video guides
    Remove the oxygen sensor housing cover.
  3. Step 4
    Seat Arosa 6h 1.4 1999 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 5
    Changing Lambda Sensor on SEAT AROSA (6H) 1.4 TDI 2000 by yourself
    Disconnect the oxygen sensor wiring.
  5. Step 6
    How to remove SEAT AROSA 1.4 16V 2001 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Lambda Sensor on SEAT AROSA (6H) 2002: download PDF manuals and video instructions
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Lambda Sensor replacement on Seat Arosa 6h 1.4 2003 - download illustrated guide
    Remove the oxygen sensor.
  8. Step 9
    Need to know how to renew Lambda Sensor on SEAT AROSA 2004? This free workshop manual will help you to do it yourself
    Clean the thread to prepare it for installing a new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Arosa (6H) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SEAT AROSA (6H) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SEAT AROSA (6H) Lambda Sensor replacement - online guide
Tips & tricks for your SEAT AROSA (6H)
View more
  • How to change Oxygen sensor on SEAT AROSA (6H) 1.7 SDI - replacement tricks
    What to do if your car heater isn't working | AUTODOC tips
  • Changing O2 sensor Seat Arosa 6h 1.0 - Replacement Tips
    How to wash your car in winter | AUTODOC tips
  • Maintenance Hacks - SEAT AROSA (6H) 1.4 NOx sensor replacement guide
    Why do your brakes squeak? | AUTODOC tips
  • Replace Lambda sensors on Seat Arosa 6h - free video tips
    How to repair a bumper yourself | AUTODOC tips