Disclaimer
How to change lambda sensor on OPEL VECTRA B Estate (31_) – replacement guide
downloads:
3
Views:
30
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
OPEL VECTRA B Estate (31_) 2.2 i 16V (F35), OPEL VECTRA B Estate (31_) 1.8 i 16V (F35), OPEL VECTRA B Estate (31_) 1.8 i 16V (F35), OPEL VECTRA B Estate (31_) 1.6 i 16V (F35) … View more
The steps may slightly vary depending on the car design.
OPEL VECTRA B Estate (31_) 2.2 i 16V (F35), OPEL VECTRA B Estate (31_) 1.8 i 16V (F35), OPEL VECTRA B Estate (31_) 1.8 i 16V (F35), OPEL VECTRA B Estate (31_) 1.6 i 16V (F35) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Lambda Sensor for VECTRA B Estate (31_) and other OPEL models
Alternative products

Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Flare nut wrench #22
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – OPEL VECTRA B Estate (31_). AUTODOC experts recommend:
- After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
- Before getting down to work, start the engine and let it warm up to operating temperature.
- Please note: all work on the car – OPEL VECTRA B Estate (31_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4
Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray. - Step 5
Detach the oxygen sensor connector. - Step 6
Unscrew the oxygen sensor fastener. Use a flare nut spanner #22. - Step 7
Remove the oxygen sensor. - Step 8
Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench. - Step 9Treat the oxygen sensor. Use high-temperature ceramic grease.Step 10
Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the OPEL Vectra B Estate (J96) model
Popular maintenance tutorials for Opel Vectra B Estate
Complete guides for changing the Oxygen sensor on different OPEL VECTRA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your OPEL VECTRA B Estate (31_)
View more
How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
TOP 5 mistakes during DIY oil change | AUTODOC tips
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
Deep interior cleaning | Car transformation by detailing
Most commonly replaced car parts on OPEL VECTRA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME












