When to replace the Lambda Sensor on your MERCEDES-BENZ SL
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ SL (R129) 320 (129.064) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for SL (R129) and other MERCEDES-BENZ models
Tools
Replacement: lambda sensor – MERCEDES-BENZ SL (R129). Tools you need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Combination spanner #22
Drive socket # 8
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – MERCEDES-BENZ SL (R129). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • All work should be done with the engine stopped.
Replacement: lambda sensor – MERCEDES-BENZ SL (R129). Recommended sequence of steps:
  1. Step 1
    Before getting down to work, start the engine and let it warm up to operating temperature.
    Step 2
    Open the bonnet.
    Step 3
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 4
    Shut off the engine.
    Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    How to change Lambda Sensor on SL R129 1989 - free PDF and video manuals
    Undo the fasteners of the oil pan lower cover. Use a drive socket #8. Use a ratchet wrench.
  2. Step 7
    How to replace MERCEDES-BENZ SL (R129) 500 SL 5.0 (129.066) 1990 Lambda Sensor - step-by-step manuals and video guides
    Remove the oil pan cover.
  3. Step 8
    SL R129 300 SL-24 3.0 (129.061) 1991 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 9
    Changing Lambda Sensor on MERCEDES-BENZ SL (R129) 320 3.2 (129.063) 1992 by yourself
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  5. Step 10
    How to remove MERCEDES-BENZ SL 300 SL 3.0 (129.060) 1993 Lambda Sensor - online easy-to-follow instructions
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  6. Step 11
    How to replace Lambda Sensor on MERCEDES-BENZ SL (R129) 1994: download PDF manuals and video instructions
    Remove the oxygen sensor.
  7. Step 12
    How hard is it to do yourself: Lambda Sensor replacement on SL R129 280 2.8 (129.058) 1995 - download illustrated guide
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  8. Step 13
    Need to know how to renew Lambda Sensor on MERCEDES-BENZ SL 1996? This free workshop manual will help you to do it yourself
    Treat the oxygen sensor. Use high-temperature ceramic grease.
  9. Step 14
    Changing of Lambda Sensor on SL R129 1997 won't be an issue if you follow this illustrated step-by-step guide
    Install the new oxygen sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ SL Convertible (R129) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ SL (R129) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ SL (R129) Lambda Sensor replacement - online guide
Tips & tricks for your MERCEDES-BENZ SL (R129)
View more
  • How to change Oxygen sensor on MERCEDES-BENZ SL (R129) 500 5.0 (129.067) - replacement tricks
    Replacing your engine cooling fan | AUTODOC tips
  • Changing O2 sensor SL R129 500 SL 5.0 (129.066) - Replacement Tips
    How to check your head gasket | AUTODOC
  • Maintenance Hacks - MERCEDES-BENZ SL (R129) 300 SL-24 3.0 (129.061) NOx sensor replacement guide
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
  • Replace Lambda sensors on SL R129 - free video tips
    How and why to check your oil | AUTODOC tips