When to replace the Lambda Sensor on your CITROËN NEMO
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
CITROËN NEMO Box (AA_) 1.4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for NEMO Box (AA_) and other CITROËN models
Alternative products
How to change Lambda sensor on Citroen Nemo Van 1.4 HDi – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – CITROËN NEMO Box (AA_). Tools you might need:
Wire brush
WD-40 spray
Electronic spray
Copper grease
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – CITROËN NEMO Box (AA_). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – CITROËN NEMO Box (AA_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Lambda Sensor on Citroen Nemo Van 2008 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 4
    How to replace CITROËN NEMO Box (AA_) 1.4 HDi 2009 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 5
    Citroen Nemo Van 1.3 HDi 2010 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 6
    Changing Lambda Sensor on CITROËN NEMO Box (AA_) 1.3 BlueHDi 2011 by yourself
    Remove the oxygen sensor.
  5. Step 7
    How to remove CITROËN NEMO 1.4 HDi 2012 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  6. Step 8
    How to replace Lambda Sensor on CITROËN NEMO Box (AA_) 2013: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Nemo Van model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY CITROËN NEMO Box (AA_) Lambda Sensor replacement - online guide
Tips & tricks for your CITROËN NEMO Box (AA_)
View more
  • How to change Oxygen sensor on CITROËN NEMO Box (AA_) 1.4 - replacement tricks
    TOP 5 mistakes during DIY oil change | AUTODOC tips
  • Changing O2 sensor Citroen Nemo Van 1.4 HDi - Replacement Tips
    Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
  • Maintenance Hacks - CITROËN NEMO Box (AA_) 1.3 HDi NOx sensor replacement guide
    Top 5 possible reasons your car is shaking or vibrating
  • Replace Lambda sensors on Citroen Nemo Van - free video tips
    5 causes of turbocharger failure and how to avoid them
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
CITROËN NEMO Box (AA_) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME