Disclaimer
How to change ignition leads on MERCEDES-BENZ W124 Coupe (C124) – replacement guide
downloads:
3
Views:
36
Recommended replacement interval for the part category Ignition Cable Kit : 60000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ W124 Coupe (C124) 230 CE (124.043), MERCEDES-BENZ W124 Coupe (C124) 230 CE Cat (124.043), MERCEDES-BENZ W124 Coupe (C124) 220 CE (124.042), MERCEDES-BENZ W124 Coupe (C124) 230 CE (124.043), MERCEDES-BENZ W124 Coupe (C124) 200 CE (124.041), MERCEDES-BENZ W124 Coupe (C124) 200 CE (124.041) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ W124 Coupe (C124) 230 CE (124.043), MERCEDES-BENZ W124 Coupe (C124) 230 CE Cat (124.043), MERCEDES-BENZ W124 Coupe (C124) 220 CE (124.042), MERCEDES-BENZ W124 Coupe (C124) 230 CE (124.043), MERCEDES-BENZ W124 Coupe (C124) 200 CE (124.041), MERCEDES-BENZ W124 Coupe (C124) 200 CE (124.041) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Leads for W124 Coupe (C124) and other MERCEDES-BENZ models
Alternative products

Wire brush
High-temperature anti-seize lubricant
Dielectric grease
Torque wrench
Combination spanner #10
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Phillips screwdriver
Crow bar
Fender cover
Replacement: ignition leads – MERCEDES-BENZ COUPE (C124). AUTODOC recommends:
- Warning! Shut down the engine before starting any work – MERCEDES-BENZ COUPE (C124).
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Disconnect the earth cable terminal from the battery. Use a combination spanner #10. - Step 4
Unscrew the inlet pipe fasteners. Use a Phillips screwdriver. Use a drive socket #10. Use a ratchet wrench. - Step 5
Remove the fastening bolts. - Step 6
Remove the inlet pipe. - Step 7
Remove the high tension cable bracket. - Step 8
Make marks to indicate the order of installation of the spark plug wires. - Step 9
Disconnect the spark plug wires from the spark plugs. - Step 10
Disconnect the high tension cables from the ignition distributor. - Step 11
Remove the high tension cables. - Step 12
Treat the ignition distributor terminals. Use a wire brush. Use dielectric grease. - Step 13Fit new high tension cables.Step 14
Connect the high tension cables to the ignition distributor.Replacement: ignition leads – MERCEDES-BENZ COUPE (C124). Tip from AUTODOC experts:Follow the installation sequence. - Step 15
Remove the ignition coil cover. - Step 16
Disconnect the high tension cable from the ignition coil. - Step 17
Remove the high tension cable from the ignition coil cover. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ W124 Coupe (C124) model
Popular maintenance tutorials for MERCEDES-BENZ COUPE (C124)
Complete guides for changing the Plug leads on different MERCEDES-BENZ 123 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ W124 Coupe (C124)
View more
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
Engine Overheating? Replace Your Cooling Fan to Fix It
Most commonly replaced car parts on MERCEDES-BENZ 123 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























