When to replace the Ignition Leads on your MERCEDES-BENZ 123 SERIES
Recommended replacement interval for the part category Ignition Cable Kit : 60000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ W123 Estate (S123) 200 T (123.280), MERCEDES-BENZ W123 Estate (S123) 200 T, MERCEDES-BENZ W123 Estate (S123) 230 TE (123.283) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: ignition leads – MERCEDES-BENZ KOMBI Estate (S123). Tools you might need:
Wire brush
High-temperature anti-seize lubricant
Dielectric grease
Torque wrench
Combination spanner #10
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Phillips screwdriver
Crow bar
Fender cover
Replacement: ignition leads – MERCEDES-BENZ KOMBI Estate (S123). AUTODOC recommends:
  • Warning! Shut down the engine before starting any work – MERCEDES-BENZ KOMBI Estate (S123).
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Leads on Mercedes S123 1977 - free PDF and video manuals
    Disconnect the earth cable terminal from the battery. Use a combination spanner #10.
  2. Step 4
    How to replace MERCEDES-BENZ W123 Estate (S123) 300 3.0 Turbo Diesel (123.193) 1978 Ignition Leads - step-by-step manuals and video guides
    Unscrew the inlet pipe fasteners. Use a Phillips screwdriver. Use a drive socket #10. Use a ratchet wrench.
  3. Step 5
    Mercedes S123 300 D 3.0 (123.190) 1979 Ignition Leads replacement: free workshop manuals
    Remove the fastening bolts.
  4. Step 6
    Changing Ignition Leads on MERCEDES-BENZ W123 Estate (S123) 230 TE 2.3 (123.283) 1980 by yourself
    Remove the inlet pipe.
  5. Step 7
    How to remove MERCEDES-BENZ 123 SERIES 280 TE 2.8 (123.093) 1981 Ignition Leads - online easy-to-follow instructions
    Remove the high tension cable bracket.
  6. Step 8
    How to replace Ignition Leads on MERCEDES-BENZ W123 Estate (S123) 1982: download PDF manuals and video instructions
    Make marks to indicate the order of installation of the spark plug wires.
  7. Step 9
    How hard is it to do yourself: Ignition Leads replacement on Mercedes S123 240 D 2.4 1983 - download illustrated guide
    Disconnect the spark plug wires from the spark plugs.
  8. Step 10
    Need to know how to renew Ignition Leads on MERCEDES-BENZ 123 SERIES 1984? This free workshop manual will help you to do it yourself
    Disconnect the high tension cables from the ignition distributor.
  9. Step 11
    Changing of Ignition Leads on Mercedes S123 1985 won't be an issue if you follow this illustrated step-by-step guide
    Remove the high tension cables.
  10. Step 12
    MERCEDES-BENZ 123 SERIES 250 2.5 (123.086) Ignition Leads replacement: online guides and video tutorials
    Treat the ignition distributor terminals. Use a wire brush. Use dielectric grease.
  11. Step 13
    Fit new high tension cables.
    Step 14
    Replacing Ignition Leads on Mercedes S123 1977 300 3.0 Turbo Diesel (123.193) by yourself
    Connect the high tension cables to the ignition distributor.
    Replacement: ignition leads – MERCEDES-BENZ KOMBI Estate (S123). Tip from AUTODOC experts:
    Follow the installation sequence.
  12. Step 15
    W123 Estate (S123) 280 TE 2.8 (123.093) 1978 Ignition Leads DIY replacement workshop manual
    Remove the ignition coil cover.
  13. Step 16
    How to change Ignition Leads on MERCEDES-BENZ W123 Estate (S123) 1979 - tips and tricks
    Disconnect the high tension cable from the ignition coil.
  14. Step 17
    Step-by-step recommendations for DIY replacement Mercedes S123 1980 280 TE 2.8 (123.093) Ignition Leads
    Remove the high tension cable from the ignition coil cover. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ W123 Estate (S123) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ W123 Estate (S123) Ignition Leads replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY MERCEDES-BENZ W123 Estate (S123) Ignition Leads replacement - online guide
Tips & tricks for your MERCEDES-BENZ W123 Estate (S123)
View more
  • How to change Plug leads on MERCEDES-BENZ W123 Estate (S123) 240 D 2.4 (123.183) - replacement tricks
    How to find and change a fuse | AUTODOC
  • Changing Spark plug leads Mercedes S123 300 3.0 Turbo Diesel (123.193) - Replacement Tips
    What to do if your car's air conditioning isn't working properly | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ W123 Estate (S123) 300 D 3.0 (123.190) Spark plug wire replacement guide
    How do EGR valves work? | AUTODOC
  • Replace Ignition cable set on Mercedes S123 - free video tips
    How to repair a bumper yourself | AUTODOC tips