Disclaimer
How to change ignition coil on SKODA FAVORIT (781) – replacement guide
downloads:
0
Views:
3
Important!
This replacement procedure can be used for:
SKODA FAVORIT (781) 1.3 (781), SKODA FAVORIT (781) 1.3 135 X, LX, GLX (781), SKODA FAVORIT (781) 1.3 135 (781), SKODA FAVORIT (781) 1.3 135 (781), SKODA FAVORIT (781) 1.3 136 (781), SKODA FAVORIT (781) 1.3 135 (781), SKODA FAVORIT (781) 1.3 135L (781) … View more
The steps may slightly vary depending on the car design.
SKODA FAVORIT (781) 1.3 (781), SKODA FAVORIT (781) 1.3 135 X, LX, GLX (781), SKODA FAVORIT (781) 1.3 135 (781), SKODA FAVORIT (781) 1.3 135 (781), SKODA FAVORIT (781) 1.3 136 (781), SKODA FAVORIT (781) 1.3 135 (781), SKODA FAVORIT (781) 1.3 135L (781) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for FAVORIT (781) and other SKODA models
Ignition coil
Ignition coil
Ignition coil for Favorit Hatchback (781) Petrol (68 hp)
Electronic spray
Torque wrench
Drive socket # 10
Torx bit T30
Ratchet wrench
Fender cover
Replacement: ignition coil – SKODA FAVORIT (781). Tip from AUTODOC:
- The replacement procedure is the same for the ignition coils of all cylinders.
- Please note: all work on the car – SKODA FAVORIT (781) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the ignition coil bracket. Use Torx T30. Use a ratchet wrench. - Step 4
Remove the ignition coil. - Step 5
Disconnect the high voltage wire.Replacement: ignition coil – SKODA FAVORIT (781). AUTODOC recommends:Be careful to avoid damaging spark plug wires. - Step 6
Detach the connector from the ignition coil. - Step 7
Remove the cowl grille seal. - Step 8
Raise up and remove the cowl grille. - Step 9
Install a new ignition coil. - Step 10
Tighten the ignition coil fastening. Use a drive socket #10. Use a torque wrench. Tighten it to 7 nm torque. - Step 11
Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Favorit Hatchback (781) model.
Popular maintenance tutorials for Skoda Favorit 781
Free download PDF
1.23 MB
Free download PDF2.36 MB
Free download PDF542.72 KB
Free download PDF593.92 KB
Free download PDF901.12 KB
Free download PDF808.96 KB
Complete guides for changing the Coil pack on different SKODA FAVORIT models
Free download PDF1.01 MB
Free download PDF1.01 MB
Free download PDF1.98 MB
Free download PDF2.3 MB
Free download PDF1.97 MB
Free download PDF1.95 MB
Your profile is your personal assistant.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- - scan the QR code
- - download from App Store
- - download from Google Play
Tips & tricks for your SKODA FAVORIT (781)
View more
What to do if the ABS light comes on | AUTODOC tips
8 bad driving habits | AUTODOC tips
DIY starter repair | AUTODOC tips
How do EGR valves work? | AUTODOC
