Important!
This replacement procedure can be used for:
OPEL Signum CC (Z03) 1.8 (F48) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for Signum CC (Z03) and other OPEL models
Alternative products
How to change Ignition coil on Opel Signum CC 1.9 CDTI (F48) – step-by-step instructions for straightforward car repair Ignition coil
Tools
Replacement: ignition coil – OPEL SIGNUM. Tools you need:
Electronic spray
Torque wrench
Torx bit T40
Ratchet wrench
Crow bar
Fender cover
Replacement: ignition coil – OPEL SIGNUM. AUTODOC experts recommend:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • Please note: all work on the car – OPEL SIGNUM – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on Opel Signum CC 2003 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition coil – OPEL SIGNUM. Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace OPEL Signum CC (Z03) 1.9 CDTI (F48) 2004 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil.
  3. Step 5
    Opel Signum CC 2.2 direct (F48) 2005 Ignition Coil replacement: free workshop manuals
    Unscrew the ignition coil bolts. Use Torx T40. Use a ratchet wrench.
  4. Step 6
    Pry up the ignition coil. Use a crowbar.
    Step 7
    Changing Ignition Coil on OPEL Signum CC (Z03) 2.0 Turbo (F48) 2006 by yourself
    Take out the ignition coil from the spark plug well.
  5. Step 8
    How to remove OPEL SIGNUM 3.2 V6 (F48) 2007 Ignition Coil - online easy-to-follow instructions
    Clean dirt, dust and debris from inside the spark plug wells.
  6. Step 9
    How to replace Ignition Coil on OPEL Signum CC (Z03) 2008: download PDF manuals and video instructions
    Install the new ignition coil to the spark plug well.
  7. Step 10
    How hard is it to do yourself: Ignition Coil replacement on Opel Signum CC 3.0 V6 CDTI (F48) 2003 - download illustrated guide
    Tighten the ignition coil bolts. Use Torx T40. Use a torque wrench. Tighten it to 7 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Signum CC (Z03) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY OPEL Signum CC (Z03) Ignition Coil replacement - online guide
Tips & tricks for your OPEL Signum CC (Z03)
View more
  • How to change Coil pack on OPEL Signum CC (Z03) 2.2 DTI (F48) - replacement tricks
    How I started restoring a driveshaft | Drivetrain restoration – Part 1
  • Changing Ignition coil pack Opel Signum CC 1.9 CDTI (F48) - Replacement Tips
    5 easy car repairs you can do without a garage visit
  • Maintenance Hacks - OPEL Signum CC (Z03) 2.2 direct (F48) Ignition coils replacement guide
    Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
  • Replace Coil packs on Opel Signum CC - free video tips
    How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips

Professional manuals for the most common OPEL models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
OPEL Signum CC (Z03) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME