Important!
This replacement procedure can be used for:
OPEL INSIGNIA Saloon 1.6 Turbo (69), OPEL INSIGNIA Saloon 1.8 (69), OPEL INSIGNIA Saloon 1.6 (69) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for INSIGNIA Saloon and other OPEL models
Alternative products
How to change Ignition coil on Opel Insignia Saloon 2.0 CDTI (69) – step-by-step instructions for straightforward car repair Ignition coil
Tools
Replacement: ignition coil – OPEL INSIGNIA Saloon. Tools you need:
Electronic spray
Torque wrench
Torx bit T40
Ratchet wrench
Crow bar
Fender cover
Replacement: ignition coil – OPEL INSIGNIA Saloon. AUTODOC experts recommend:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • Please note: all work on the car – OPEL INSIGNIA Saloon – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on Opel Insignia Saloon 2008 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition coil – OPEL INSIGNIA Saloon. Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace OPEL INSIGNIA Saloon 2.0 CDTI (69) 2009 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil.
  3. Step 5
    Opel Insignia Saloon 1.8 (69) 2010 Ignition Coil replacement: free workshop manuals
    Unscrew the ignition coil bolts. Use Torx T40. Use a ratchet wrench.
  4. Step 6
    Pry up the ignition coil. Use a crowbar.
    Step 7
    Changing Ignition Coil on OPEL INSIGNIA Saloon 2.8 V6 Turbo OPC 4x4 (69) 2011 by yourself
    Take out the ignition coil from the spark plug well.
  5. Step 8
    How to remove OPEL INSIGNIA 2.0 Turbo (69) 2012 Ignition Coil - online easy-to-follow instructions
    Clean dirt, dust and debris from inside the spark plug wells.
  6. Step 9
    How to replace Ignition Coil on OPEL INSIGNIA Saloon 2013: download PDF manuals and video instructions
    Install the new ignition coil to the spark plug well.
  7. Step 10
    How hard is it to do yourself: Ignition Coil replacement on Opel Insignia Saloon 1.4 (69) 2014 - download illustrated guide
    Tighten the ignition coil bolts. Use Torx T40. Use a torque wrench. Tighten it to 7 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Insignia A Saloon (G09) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY OPEL INSIGNIA Saloon Ignition Coil replacement - online guide
Tips & tricks for your OPEL INSIGNIA Saloon
View more
  • How to change Coil pack on OPEL INSIGNIA Saloon 1.6 Turbo (69) - replacement tricks
    Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
  • Changing Ignition coil pack Opel Insignia Saloon 2.0 CDTI (69) - Replacement Tips
    Motorcycle fuel tank restoration
  • Maintenance Hacks - OPEL INSIGNIA Saloon 1.8 (69) Ignition coils replacement guide
    #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
  • Replace Coil packs on Opel Insignia Saloon - free video tips
    Why Checking Your Oil is Crucial for Engine Performance

Professional manuals for the most common OPEL models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
OPEL INSIGNIA Saloon Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME