Important!

This replacement procedure can be used for:
MERCEDES-BENZ S-Class Saloon (W126) 300 SE, SEL (126.024, 126.025), MERCEDES-BENZ S-Class Saloon (W126) 300 SE, SEL (126.024, 126.025), MERCEDES-BENZ S-Class Saloon (W126) 260 SE (126.020), MERCEDES-BENZ S-Class Saloon (W126) 260 SE (126.020) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Alternative products

Ignition coil

Replacement: ignition coil – MERCEDES-BENZ S-CLASS (W126). Tools you'll need:

                      Wire brush
                    
                      High-temperature anti-seize lubricant
                    
                      Dielectric grease
                    
                      Torque wrench
                    
                      Combination spanner #10
                    
                      Drive socket # 10
                    
                      Spark plug socket # 16
                    
                      Ratchet wrench
                    
                      Phillips screwdriver
                    
                      Crow bar
                    
                      Fender cover

Buy tools

Replacement: ignition coil – MERCEDES-BENZ S-CLASS (W126). Tip from AUTODOC:

Warning! Shut down the engine before starting any work – MERCEDES-BENZ S-CLASS (W126).

Carry out replacement in the following order:

Step 1

Open the bonnet.

Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 3

Disconnect the earth cable terminal from the battery. Use a combination spanner #10.
Step 4

Unscrew the inlet pipe fasteners. Use a Phillips screwdriver. Use a drive socket #10. Use a ratchet wrench.
Step 5

Remove the fastening bolts.
Step 6

Remove the inlet pipe.
Step 7

Remove the ignition coil cover.
Step 8

Disconnect the high tension cable from the ignition coil.
Step 9

Unscrew the fasteners of the ignition coil terminals. Use a drive socket #10. Use a ratchet wrench.
Step 10

Disconnect the terminals from the ignition coil.
Step 11

Unscrew the ignition coil fasteners. Use a combination spanner #10.
Step 12

Remove the ignition coil.
Step 13

Install a new ignition coil.
Step 14

Screw in the ignition coil fasteners. Use a combination spanner #10.
Step 15

Connect the terminals to the ignition coil.
Step 16

Treat the ignition coil terminals. Use dielectric grease.
Step 17

Screw in the ignition coil terminals. Use a drive socket #10. Use a ratchet wrench.
Step 18

Connect the high tension cable to the ignition coil.
Step 19

Fit the ignition coil cover.
Step 20

Attach the inlet pipe.
Step 21

Install the fastening bolts.
Step 22

Screw in the inlet pipe fasteners. Use a Phillips screwdriver. Use a drive socket #10. Use a ratchet wrench.
Step 23

Connect the earth cable terminal to the battery.

Step 24

Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.

Step 25

Shut off the engine.

Step 26

Remove the fender protection cover.

Step 27

Close the bonnet.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ S-Class Saloon (W126) model

Mercedes W126 tyre size

How to change engine thermostat on MERCEDES-BENZ S-Class Saloon (W126) – replacement guide

Free download PDF 1.41 MB
How to change front brake pads on MERCEDES-BENZ S-Class Saloon (W126) – replacement guide

Free download PDF 1.49 MB
How to change rear brake pads on MERCEDES-BENZ S-Class Saloon (W126) – replacement guide

Free download PDF 1.24 MB
How to change engine oil and filter on MERCEDES-BENZ S-Class Saloon (W126) – replacement guide

Free download PDF 1.24 MB
How to change rear brake caliper on MERCEDES-BENZ S-Class Saloon (W126) – replacement guide

Free download PDF 2.09 MB
How to change hand brake cable on MERCEDES-BENZ S-Class Saloon (W126) – replacement guide

Free download PDF 2.97 MB

How to change ignition coil on MERCEDES-BENZ S-Class Saloon (W140) – replacement guide

Free download PDF 1.32 MB
How to change ignition coil on a car – replacement tutorial

Universal

Free download PDF 1.98 MB
How to change ignition coil on Mercedes W168 – replacement guide

Free download PDF 1.6 MB
How to change ignition coil on Mercedes W203 – replacement guide

Free download PDF 1.16 MB
How to change ignition coil on Mercedes W201 – replacement guide

Free download PDF 1.56 MB
How to change ignition leads on Mercedes W201 – replacement guide

Free download PDF 1.63 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

Motorcycle fuel tank restoration

4K views

Published on: 03/07/2025
Cold starts | 5 mistakes that wreck your car

14K views

Published on: 23/10/2025
DIY manual gearbox restoration | Drivetrain restoration – Part 3

53K views

Published on: 14/11/2024
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC

10K views

Published on: 13/01/2021