When to replace the Glow Plugs on your DACIA SANDERO
Recommended replacement interval for the part category Glow plug : 30000 km
Important!
This replacement procedure can be used for:
DACIA SANDERO 1.5 dCi, DACIA SANDERO 1.5 dCi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Glow Plugs for SANDERO and other DACIA models
Tools
Replacement: glow plugs – DACIA SANDERO. Tools you might need:
Injector & glow plug grease
Torque wrench
Drive socket # 10
Spark plug socket # 10
Ratchet wrench
Flat Screwdriver
Combination pliers
Crow bar
Microfibre towel
Fender cover
Replacement: glow plugs – DACIA SANDERO. AUTODOC recommends:
  • The replacement procedure is identical for all glow plugs.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Wear gloves to protect your hands from hot surfaces.
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Glow Plugs on Dacia Sandero sd 2008 - free PDF and video manuals
    Disconnect the air intake pipe fastening. Use a drive socket #10. Use a ratchet wrench.
  2. Step 4
    How to replace DACIA SANDERO 1.4 MPI LPG 2009 Glow Plugs - step-by-step manuals and video guides
    Detach the air intake hose clamp. Use combination pliers. Use a crowbar.
  3. Step 5
    Dacia Sandero sd 1.4 (BS0C, BS0A, BS0G, BS1F, BS0E) 2010 Glow Plugs replacement: free workshop manuals
    Remove the air intake pipe.
  4. Step 6
    Changing Glow Plugs on DACIA SANDERO 1.5 dCi 2011 by yourself
    Cover the air intake hose with a microfibre towel to prevent dust and dirt from getting into the system.
  5. Step 7
    How to remove DACIA SANDERO 1.6 (BS0D, BS0B, BS0F, BS0H) 2012 Glow Plugs - online easy-to-follow instructions
    Detach the engine wiring harness. Use a flat screwdriver.
  6. Step 8
    How to replace Glow Plugs on DACIA SANDERO 2013: download PDF manuals and video instructions
    Unscrew the engine cover fastener. Use a drive socket #10. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Glow Plugs replacement on Dacia Sandero sd 1.2 16V LPG 2014 - download illustrated guide
    Remove the engine cover.
    Replacement: glow plugs – DACIA SANDERO. Tip from AUTODOC experts:
    Do not apply excessive force when removing the part. Otherwise you may damage it.
  8. Step 10
    Need to know how to renew Glow Plugs on DACIA SANDERO 2015? This free workshop manual will help you to do it yourself
    Clean dirt, dust and debris from inside the spark plug wells.
  9. Step 11
    Changing of Glow Plugs on Dacia Sandero sd 2016 won't be an issue if you follow this illustrated step-by-step guide
    Detach the glow plug wiring connectors.
  10. Step 12
    DACIA SANDERO 1.4 (BS0C, BS0A, BS0G, BS1F, BS0E) Glow Plugs replacement: online guides and video tutorials
    Unscrew the glow plugs. Use the spark plug socket #10. Use a ratchet wrench.
  11. Step 13
    Replacing Glow Plugs on Dacia Sandero sd 2018 1.4 MPI LPG by yourself
    Remove the glow plugs.
  12. Step 14
    SANDERO 1.6 (BS0D, BS0B, BS0F, BS0H) 2019 Glow Plugs DIY replacement workshop manual
    Treat the glow plugs. Use the injector & glow plug grease.
    Please note!
    Do not touch the heating element as fingerprints may cause malfunction.
  13. Step 15
    How to change Glow Plugs on DACIA SANDERO 2020 - tips and tricks
    Install new glow plugs to their mounting seats.
  14. Step 16
    Step-by-step recommendations for DIY replacement Dacia Sandero sd 2021 1.6 (BS0D, BS0B, BS0F, BS0H) Glow Plugs
    Tighten the glow plugs. Use the spark plug socket #10. Use a torque wrench. Tighten it to 15 nm torque.
    Replacement: glow plugs – DACIA SANDERO. Tip from AUTODOC:
    Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the DACIA Sandero I (SD) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
DACIA SANDERO Glow Plugs replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY DACIA SANDERO Glow Plugs replacement - online guide
Tips & tricks for your DACIA SANDERO
View more
  • How to change Glow plug on DACIA SANDERO 1.2 16V - replacement tricks
    How to remove scratches from a car | AUTODOC tips
  • Changing Heater plugs Dacia Sandero sd 1.4 MPI LPG - Replacement Tips
    Why do your brakes squeak? | AUTODOC tips
  • Maintenance Hacks - DACIA SANDERO 1.4 (BS0C, BS0A, BS0G, BS1F, BS0E) Heater plug replacement guide
    How to shine your tyres | AUTODOC tips
  • Replace Diesel glow plugs on Dacia Sandero sd - free video tips
    The most common problems when buying a used car | AUTODOC

Professional manuals for the most common DACIA models