Disclaimer
How to change fuel filter on PEUGEOT 405 II Estate (4E) – replacement guide
downloads:
1
Views:
16
Recommended replacement interval for the part category Fuel filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
PEUGEOT 405 II Break (4E) 1.9 TD, PEUGEOT 405 II Break (4E) 1.9 D, PEUGEOT 405 II Break (4E) 1.9 D, PEUGEOT 405 II Break (4E) 1.9 TD, PEUGEOT 405 II Break (4E) 1.9 D … View more
The steps may slightly vary depending on the car design.
PEUGEOT 405 II Break (4E) 1.9 TD, PEUGEOT 405 II Break (4E) 1.9 D, PEUGEOT 405 II Break (4E) 1.9 D, PEUGEOT 405 II Break (4E) 1.9 TD, PEUGEOT 405 II Break (4E) 1.9 D … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for 405 II Break (4E) and other PEUGEOT models
Alternative products

All-purpose cleaning spray
Torque wrench
HEX bit No.H4
Ratchet wrench
Hand-operated fluid syringe
Fender cover
Replacement: fuel filter – PEUGEOT 405 II Break (4E). Tip from AUTODOC:
- Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
- Please note: all work on the car – PEUGEOT 405 II Break (4E) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Clean the fuel filter housing and the cover. Use all-purpose cleaning spray. - Step 4
Unscrew the fasteners of the fuel filter cover. Use HEX No.H4. Use a ratchet wrench. - Step 5
Remove the fuel filter housing cover. - Step 6
Remove the fuel filter.Replacement: fuel filter – PEUGEOT 405 II Break (4E). AUTODOC recommends:Be careful! Fuel may leak from the filter housing and hoses. - Step 7
Put the old filter cartridge in the container. - Step 8
Pump the fuel out of the fuel filter housing. Use a hand-operated fluid syringe. - Step 9
Install a new fuel filter.AUTODOC recommends:Make sure that the fuel filter is positioned correctly. Consider the fuel flow direction mark.During installation, take care to prevent dust and dirt from getting into the fuel filter housing.PEUGEOT 405 II Break (4E) – It's important to only use high-quality car parts. - Step 10
Install and tighten the cap of the fuel filter housing.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 405 II Estate (4E) model
Popular maintenance tutorials for PEUGEOT 405 II Break (4E)
Complete guides for changing the Fuel filters on different PEUGEOT 405 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 405 II Break (4E)
View more
5 more brake repair mistakes | Stop making these brake repair mistakes
TOP 6 WD-40 lifehacks | AUTODOC tips
Deep interior cleaning | Car transformation by detailing
Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
Most commonly replaced car parts on PEUGEOT 405
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























