
Disclaimer
How to change fuel filter on BMW 8 (E31) – replacement guide
downloads:
7
Views:
323

Recommended replacement interval for the part category Fuel filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
BMW 8 (E31) 850 CSi, BMW 8 (E31) 840Ci, BMW 8 (E31) 840i … View more
The steps may slightly vary depending on the car design.
BMW 8 (E31) 850 CSi, BMW 8 (E31) 840Ci, BMW 8 (E31) 840i … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for 8 (E31) and other BMW models
Fuel filter
Alternative products

Wire brush
All-purpose cleaning spray
Fluid container
Drive socket # 5.5
Drive socket # 8
Drive socket # 10
HEX bit No.H5.
Ratchet wrench
Clip removal tool
Fender cover
Replacement: fuel filter – BMW 8 (E31). Tip from AUTODOC experts:
- Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
- Please note: all work on the car – BMW 8 (E31) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the fuel door.Step 2Unscrew the fuel filler cap.Step 3Open the bonnet.Step 4Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 5Lift the car using a jack or place it over an inspection pit.
- Step 6Unscrew the fasteners of the underbody cover panel. Use a drive socket #10. Use a drive socket #8. Use a ratchet wrench.
- Step 7Remove the clips of the underbody cover panel. Use a clip removal tool.
- Step 8Remove the underbody cover panel.Replacement: fuel filter – BMW 8 (E31). Tip:Do not apply excessive force when removing the part. Otherwise you may damage it.
- Step 9Clean the fasteners of the fuel supply lines. Use a nylon cleaning brush. Use all-purpose cleaning spray.
- Step 10Prepare a container for fluids.
- Step 11Unscrew the fastener attaching the fuel supply line to the fuel filter housing. Use a drive socket #5.5. Use a ratchet wrench.
- Step 12Disconnect the fuel supply lines from the fuel filter.
- Step 13Clean the fuel filter mounting bracket. Use WD-40 spray.
- Step 14Loosen the fuel filter mounting. Use HEX No.H5. Use a ratchet wrench.
- Step 15Remove the fuel filter.
- Step 16Install a new fuel filter.Replacement: fuel filter – BMW 8 (E31). Tip from AUTODOC:Remember, it is important not to mix up the input and output of the filter. Arrows on the filter indicate the direction of fuel flow.During installation, take care to prevent dust and dirt from getting into the fuel filter housing.BMW 8 (E31) – It's important to only use high-quality filters.
- Step 17Connect the fuel supply lines to the fuel filter.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 8 (E31) model
Popular maintenance tutorials for BMW E31
Complete guides for changing the Fuel filters on different BMW 8 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 8 (E31)
View more
- #TPMS Explained: Why Your Light is On and How to Respond Safely
- What to do if the ABS light comes on: DIY Diagnostics Tips
- Which Coolant is Best? Comparison Test | AUTODOC
- How to remove rust | AUTODOC tips
Most commonly replaced car parts on BMW 8 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME