
Disclaimer
How to change front wiper motor on Renault Clio 3 – replacement guide
downloads:
35
Views:
1282
Important!
This replacement procedure can be used for:
RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR02, BR0J, BR11, CR02, CR0J, CR11), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0R, BR1D, BR1L, CR0R), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR09, BR0T, CR09, CR0T), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR05, BR0B, BR0Y, BR15, BR1J, BR1M, BR1Y, CR0B,..., RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.4 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (C/BR0G, C/BR1G), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR17, CR17), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR0H, CR0H, CR1S, BR1S), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V Sport (CR0N, CR1P), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR1C, CR1C), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V (BR0C, BR0K, CR0C, CR0K), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0P, CR0P), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V Hi-Flex (BR1U, CR1U), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V GT (BR10, CR10), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V Sport, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR02, BR0J, BR11, CR02, CR0J, CR11), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0R, BR1D, BR1L, CR0R), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR09, BR0T, CR09, CR0T), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V (BR05, BR0B, BR0Y, BR15, BR1J, BR1M, BR1Y, CR0B,..., RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.4 16V, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (C/BR0G, C/BR1G), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR17, CR17), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR0H, CR0H, CR1S, BR1S), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V Sport (CR0N, CR1P), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi (BR1C, CR1C), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V (BR0C, BR0K, CR0C, CR0K), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V (BR0P, CR0P), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.2 16V Hi-Flex (BR1U, CR1U), RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.6 16V GT (BR10, CR10), RENAULT Clio III Hatchback (BR0/1, CR0/1) 2.0 16V Sport, RENAULT Clio III Hatchback (BR0/1, CR0/1) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
How to change wiper motor on RENAULT CLIO 3 [TUTORIAL AUTODOC]

All the parts you need to replace – Wiper Motor for Clio III Hatchback (BR0/1, CR0/1) and other RENAULT models
Wiper motor
Alternative products

Wire brush
WD-40 spray
Copper grease
Torque wrench
Combination spanner #13
Drive socket # 10
Drive socket # 16
Torx bit T30
Ratchet wrench
3-Arm Gear Puller
Clip removal tool
Fender cover
Replacement: wiper motor – Renault Clio 3. AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: wiper motor – Renault Clio 3. Recommended sequence of steps:
- Step 1Open the bonnet.
- Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
- Step 3Remove the windscreen wiper arm nut covers. Use a clip removal tool.
- Step 4Clean the fasteners of the wiper arms. Use a wire brush. Use WD-40 spray.
- Step 5Unscrew the fasteners of the windscreen wiper arms. Use a drive socket #16. Use a ratchet wrench.
- Step 6Remove the wiper arms.
- Step 7Remove the cowl grille seal.
- Step 8Remove the cowl grille clips. Use a clip removal tool.Step 9Raise up and remove the cowl grille.
- Step 10Remove the wiper linkage cover. Use a clip removal tool.
- Step 11Clean the wiper linkage fasteners. Use WD-40 spray.
- Step 12Unscrew the wiper linkage fasteners. Use a drive socket #10. Use a ratchet wrench.
- Step 13Unplug the wiper motor connector.
- Step 14Remove the wiper linkage.
- Step 15Clean the wiper motor fasteners. Use WD-40 spray.
- Step 16Unscrew the wiper motor fasteners. Use a combination spanner #13.
- Step 17Detach the wiper motor. Use 3-Arm Gear Puller.
- Step 18Clean the wiper motor fasteners. Use a wire brush. Use WD-40 spray.
- Step 19Unscrew the wiper motor fasteners. Use Torx T30. Use a ratchet wrench.
- Step 20Remove the wiper motor.
- Step 21Install the new wiper motor.
- Step 22Screw in the wiper motor fasteners. Use Torx T30. Use a ratchet wrench.
- Step 23Attach the wiper motor.
- Step 24Screw in the wiper motor fasteners. Use a combination spanner #13.
- Step 25Tighten the wiper motor fasteners. Use Torx T30. Use a torque wrench. Tighten it to 24 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Clio III Hatchback (BR0/1, CR0/1) model
Popular maintenance tutorials for Renault Clio 3
Complete guides for changing the Windscreen washer motor on different RENAULT CLIO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Clio III Hatchback (BR0/1, CR0/1)
View more
- Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
- How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
- Checking the starter without removing it | AUTODOC tips
- #DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
Most commonly replaced car parts on RENAULT CLIO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME