Disclaimer
How to change front window regulator on MERCEDES-BENZ E-Class Platform / Chassis (VF210) – replacement guide
downloads:
3
Views:
111
Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 280 (210.663), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 290 TD (210.617), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 270 CDI (210.616), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 250 d (210.610), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 220 CDi (210.606) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 280 (210.663), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 290 TD (210.617), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 270 CDI (210.616), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 250 d (210.610), MERCEDES-BENZ E-Class Platform / Chassis (VF210) E 220 CDi (210.606) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Window Regulator for E-Class Platform / Chassis (VF210) and other MERCEDES-BENZ models
Alternative products

WD-40 spray
Multi-purpose lithium grease
Torque wrench
Drive socket # 10
Torx bit T30
Ratchet wrench
Phillips screwdriver
Plastic trim tool
Drill
7 mm drill bit
Riveter
4.8 mm rivets
Painter's tape
Replacement: window regulator – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). Professionals recommend:
- All work should be done with the engine stopped.
Replacement: window regulator – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). Recommended sequence of steps:
- Step 1Open the car door.Step 2Switch on the ignition.Step 3Lower the window glass.AUTODOC recommends:Continue lowering the window glass until its fasteners become visible.Step 4Switch off the ignition.Step 5
Remove the door card fastener cover. Use a plastic trim tool. - Step 6
Detach the door handle trim panel. Use a plastic trim tool. - Step 7
Detach the SRS cover. Use a plastic trim tool. - Step 8
Unscrew the door lock cover fastener. Use a Phillips screwdriver. - Step 9
Remove the door lock cover. - Step 10
Unscrew the door card fasteners. Use a Phillips screwdriver. - Step 11
Detach the door card. Use a plastic trim tool.Replacement: window regulator – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). AUTODOC recommends:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 12
Detach the door lock actuator cable. - Step 13
Detach the door handle illumination module. - Step 14
Remove the light. Use a plastic trim tool. - Step 15
Detach the bulb connector. - Step 16
Detach the door panel sound insulation. - Step 17
Detach the speaker connector. - Step 18
Unscrew the speaker's fasteners. Use a Phillips screwdriver. - Step 19
Remove the speaker. - Step 20
Treat the glass fastener. Use WD-40 spray. - Step 21
Unscrew the glass fastener. Use a Phillips screwdriver. - Step 22Switch on the ignition.Step 23
Raise the glass a little and release it from the window regulator.AUTODOC recommends:When removing the glass, hold it firmly to avoid injury. - Step 24Switch off the ignition.Step 25
Raise the window glass all the way up and secure it on the door frame with masking tape.Replacement: window regulator – MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210). Tip:To avoid injury, hold the glass when raising it. - Step 26
Drill out the rivets of the window regulator linkage. Use a drill. Use a 7 mm drill bit. - Step 27
Remove the window regulator mechanism. - Step 28
Detach the connector from the power window motor. - Step 29
Unscrew the power window motor fasteners. Use Torx T30. Use a ratchet wrench. - Step 30
Remove the power window motor. - Step 31
Install and screw in the motor fasteners on the new window regulator mechanism. Use Torx T30. Use a ratchet wrench. - Step 32
Attach the connector to the power window motor. - Step 33
Install the new window regulator mechanism. - Step 34Treat the window regulator mechanism. Use a multi-purpose lithium grease.Step 35
Install the rivets of the window regulator mechanism. Use a riveter. Use 4.8 mm rivets.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Platform / Chassis (VF210) model
Popular maintenance tutorials for MERCEDES-BENZ E-Klasse Pritsche / Fahrgestell (VF210)
Complete guides for changing the Window mechanism on different MERCEDES-BENZ E-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ E-Class Platform / Chassis (VF210)
View more
5 mistakes made when washing the engine | AUTODOC tips
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
3 essential tips for choosing summer tyres | Get ready for warmer weather
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
Most commonly replaced car parts on MERCEDES-BENZ E-CLASS
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


































