Important!
This replacement procedure can be used for:
NISSAN INTERSTAR Bus (X70) dCi 80, NISSAN INTERSTAR Bus (X70) dCI 90, NISSAN INTERSTAR Bus (X70) dCi 115, NISSAN INTERSTAR Bus (X70) dCi 140, NISSAN INTERSTAR Bus (X70) dCi 100, NISSAN INTERSTAR Bus (X70) dCi 120, NISSAN INTERSTAR Bus (X70) dCi 150, NISSAN INTERSTAR Bus (X70) dCi 100 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for INTERSTAR Bus (X70) and other NISSAN models
Alternative products
How to change Shock absorber on Nissan Interstar Minibus dCi 120 – step-by-step instructions for straightforward car repair Shock absorber
Tools
Replacement: shock absorbers – NISSAN INTERSTAR Bus (X70). List of the tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Ceramic grease
Torque wrench
18 mm socket
21 mm socket
30 mm socket
24 mm wheel impact socket
Ratchet wrench or power tool for removal/installation of threaded fasteners
Tommy bar
Spring compressor
Transmission jack or a second vehicle jack
Car lift or jack with jack stands, and wheel chocks
Replacement: shock absorbers – NISSAN INTERSTAR Bus (X70). Professionals recommend:
  • Replace shock absorbers in pairs on an axle.
  • The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
  • Please note: all work on the car – NISSAN INTERSTAR Bus (X70) – should be done with the engine switched off.
Carry out the replacement steps as follows:
  1. Step 1
    How to change Shock Absorber on Nissan Interstar Minibus 2002 - free PDF and video manuals
    If you are going to use a jack, secure the wheels with chocks.
  2. Step 2
    How to replace NISSAN INTERSTAR Bus (X70) dCi 120 2003 Shock Absorber - step-by-step manuals and video guides
    Loosen the wheel fasteners. Use a 24 mm wheel impact socket. Use a tommy bar.
  3. Step 3
    Raise the vehicle.
    Replacement: shock absorbers – NISSAN INTERSTAR Bus (X70). AUTODOC recommends:
    If you are using a jack, make sure the car is parked on a hard, flat surface.Make sure to additionally secure the car with jack stands.
    Step 4
    Nissan Interstar Minibus dCi 115 2004 Shock Absorber replacement: free workshop manuals
    Unscrew the wheel fasteners.
    Caution!
    To avoid injury, hold up the wheel when unscrewing the fasteners.
  4. Step 5
    Changing Shock Absorber on NISSAN INTERSTAR Bus (X70) 1.9 dCi 80 2005 by yourself
    Remove the wheel.
  5. Step 6
    How to remove NISSAN INTERSTAR 2.5 dCi 100 2006 Shock Absorber - online easy-to-follow instructions
    Support the steering knuckle. Use a transmission jack or one more vehicle jack.
  6. Step 7
    How to replace Shock Absorber on NISSAN INTERSTAR Bus (X70) 2007: download PDF manuals and video instructions
    Clean the fastener connecting the control arm to the subframe. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Shock Absorber replacement on Nissan Interstar Minibus 3.0 dCi 140 2008 - download illustrated guide
    Loosen the fastener connecting the control arm to the subframe. Use a 30 mm socket. Use a tommy bar.
  8. Step 9
    Need to know how to renew Shock Absorber on NISSAN INTERSTAR 2009? This free workshop manual will help you to do it yourself
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  9. Step 10
    Changing of Shock Absorber on Nissan Interstar Minibus 2010 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the lower fastener of the shock absorber. Use a 21 mm socket. Use a ratchet wrench.
  10. Step 11
    NISSAN INTERSTAR dCi 120 Shock Absorber replacement: online guides and video tutorials
    Unscrew the upper fastener of the shock absorber. Use an 18 mm socket. Use a ratchet wrench.
  11. Step 12
    Replacing Shock Absorber on Nissan Interstar Minibus 2012 dCi 120 by yourself
    Remove the fastening bolts.
  12. Step 13
    INTERSTAR Bus (X70) 2.5 dCi 100 2013 Shock Absorber DIY replacement workshop manual
    Remove the shock absorber.
  13. Step 14
    How to change Shock Absorber on NISSAN INTERSTAR Bus (X70) 2014 - tips and tricks
    Clean the shock absorber mounting seats. Use a wire brush. Use an all-purpose cleaning spray.
  14. Step 15
    Step-by-step recommendations for DIY replacement Nissan Interstar Minibus 2015 2.5 dCi 100 Shock Absorber
    Install the new shock absorber.
    AUTODOC recommendation:
    Before installing the new shock absorber, make sure to prime it if the part manufacturer recommends doing so. Holding the part upright, compress it and let it extend on its own 3–5 times.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Interstar Minibus (X70) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN INTERSTAR Bus (X70) Shock Absorber replacement - online guide
Tips & tricks for your NISSAN INTERSTAR Bus (X70)
View more
  • How to change Shock absorbers on NISSAN INTERSTAR Bus (X70) dCi 150 - replacement tricks
    How to fix your car with AUTODOC CLUB
  • Changing Shocks Nissan Interstar Minibus dCi 120 - Replacement Tips
    CHECK ENGINE light turned on – step-by-step guide on what to do
  • Maintenance Hacks - NISSAN INTERSTAR Bus (X70) dCi 115 Struts replacement guide
    Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
  • Replace Struts and shocks on Nissan Interstar Minibus - free video tips
    Top 5 reasons why your car squeals | AUTODOC Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN INTERSTAR Bus (X70) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME