
Disclaimer
How to change front lower arm on VAUXHALL Vectra (B) Saloon (J96) – replacement guide
downloads:
0
Views:
15
Important!
This replacement procedure can be used for:
VAUXHALL Vectra (B) Saloon (J96) 1.6 i (F19), VAUXHALL Vectra (B) Saloon (J96) 1.6 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 1.8 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.0 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.5 i V6 (F19), VAUXHALL Vectra (B) Saloon (J96) 1.7 TD (F19), VAUXHALL Vectra (B) Saloon (J96) 2.0 DI 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.0 DTI 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.5 i GSi (F19), VAUXHALL Vectra (B) Saloon (J96) 1.8 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.2 DTI 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.2 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.6 i V6 (F19), VAUXHALL Vectra (B) Saloon (J96) 1.8 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.0 Dualfuel (F19) … View more
The steps may slightly vary depending on the car design.
VAUXHALL Vectra (B) Saloon (J96) 1.6 i (F19), VAUXHALL Vectra (B) Saloon (J96) 1.6 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 1.8 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.0 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.5 i V6 (F19), VAUXHALL Vectra (B) Saloon (J96) 1.7 TD (F19), VAUXHALL Vectra (B) Saloon (J96) 2.0 DI 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.0 DTI 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.5 i GSi (F19), VAUXHALL Vectra (B) Saloon (J96) 1.8 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.2 DTI 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.2 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.6 i V6 (F19), VAUXHALL Vectra (B) Saloon (J96) 1.8 i 16V (F19), VAUXHALL Vectra (B) Saloon (J96) 2.0 Dualfuel (F19) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Control Arm for Vectra (B) Saloon (J96) and other VAUXHALL models
Suspension arm
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Torque wrench
Tap wrench
Hammer
Flat chisel
Rubber mallet
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – VAUXHALL VECTRA (B). AUTODOC recommends:
- The replacement procedure is identical for the left and right lower control arms.
- All work should be done with the engine stopped.
Replacement: front lower arm – VAUXHALL VECTRA (B). Take the following steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: front lower arm – VAUXHALL VECTRA (B). Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
- Step 8Remove the fastening bolt.
- Step 9Unscrew the front arm fastener. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
- Step 10Unscrew the rear fastener connecting the control arm to the subframe. Use a combination spanner #18 (2 pieces).
- Step 11Remove the rear fastener of the control arm.
- Step 12Release the fastener that connects the control arm ball joint to the steering knuckle. Use a flat metal-working chisel. Use a hammer.
- Step 13Disconnect the lower arm from the steering knuckle.
- Step 14Remove the front fastener of the control arm.
- Step 15Remove the arm.
- Step 16Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
- Step 17Install a new arm. Use a rubber mallet. Use a crowbar.Replacement: front lower arm – VAUXHALL VECTRA (B). AUTODOC experts recommend:During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
- Step 18Install the control arm fasteners.
- Step 19Connect the lower arm to the steering knuckle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VAUXHALL Vectra Mk1 (B) Saloon (J96) model
Popular maintenance tutorials for VAUXHALL VECTRA (B)
Complete guides for changing the Control arm on different VAUXHALL VECTRA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VAUXHALL Vectra (B) Saloon (J96)
View more
- 5 mistakes made when washing the engine | AUTODOC tips
- Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
- How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
- Checking the starter without removing it | AUTODOC tips
Most commonly replaced car parts on VAUXHALL VECTRA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME