Important!
This replacement procedure can be used for:
BMW X1 (E84) xDrive 28 i, BMW X1 (E84) sDrive 20 i, BMW X1 (E84) xDrive 20 i, BMW X1 (E84) sDrive 18 i, BMW X1 (E84) xDrive 28 i, BMW X1 (E84) sDrive 18 d, BMW X1 (E84) xDrive 18 d, BMW X1 (E84) xDrive 20 d, BMW X1 (E84) sDrive 20 d, BMW X1 (E84) xDrive 23 d, BMW X1 (E84) xDrive 20 d, BMW X1 (E84) sDrive 20 d, BMW X1 (E84) sDrive 18 d, BMW X1 (E84) xDrive 18 d, BMW X1 (E84) sDrive 18 i, BMW X1 (E84) xDrive 25 i, BMW X1 (E84) sDrive 28 i, BMW X1 (E84) xDrive 25 d, BMW X1 (E84) sDrive 16 d, BMW X1 (E84) xDrive 20 d, BMW X1 (E84) sDrive 20 d, BMW X1 (E84) sDrive 16 i, BMW X1 (E84) xDrive 35 i, BMW X1 (E84) xDrive 28 i Flex View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for X1 (E84) and other BMW models
Tools
Replacement: front lower arm – BMW X1 (E84). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Combination spanner #21
Torx bit T30
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hammer
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – BMW X1 (E84). AUTODOC recommends:
  • The replacement procedure is identical for the left and right lower control arms.
  • Please note: all work on the car – BMW X1 (E84) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Control Arm on BMW X1 E84 2009 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace BMW X1 (E84) xDrive18d 2.0 2010 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    BMW X1 E84 sDrive 18 d 2011 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW X1 (E84)
  4. Step 5
    Changing Control Arm on BMW X1 (E84) xDrive23d 2.0 2012 by yourself
    Remove the wheel.
  5. Step 6
    How to remove BMW X1 xDrive20d 2.0 2013 Control Arm - online easy-to-follow instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Control Arm on BMW X1 (E84) 2014: download PDF manuals and video instructions
    Unscrew the fastener connecting the ball joint of the front control arm to the steering knuckle. Use a combination spanner #21. Use Torx T30. Use a ratchet wrench.
  7. Step 8
    Clean the fasteners connecting the control arm to the subframe. Use a wire brush. Use WD-40 spray.
    Step 9
    How hard is it to do yourself: Control Arm replacement on BMW X1 E84 sDrive16d 2.0 2015 - download illustrated guide
    Unscrew the rear fastener connecting the control arm to the subframe. Use a combination spanner #18 (2 pieces).
  8. Step 10
    Remove the rear fastener of the control arm. Use a hammer.
    Step 11
    Need to know how to renew Control Arm on BMW X1 2009? This free workshop manual will help you to do it yourself
    Disconnect the lower arm from the steering knuckle. Use a hammer.
  9. Step 12
    Changing of Control Arm on BMW X1 E84 2010 won't be an issue if you follow this illustrated step-by-step guide
    Remove the arm.
  10. Step 13
    BMW X1 sDrive18d 2.0 Control Arm replacement: online guides and video tutorials
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  11. Step 14
    Replacing Control Arm on BMW X1 E84 2012 xDrive18d 2.0 by yourself
    Install a new arm.
    Replacement: front lower arm – BMW X1 (E84). Professionals recommend:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  12. Step 15
    Connect the lower arm to the steering knuckle.
    Step 16
    X1 (E84) xDrive20d 2.0 2013 Control Arm DIY replacement workshop manual
    Screw in the fastener connecting the ball joint of the front control arm to the steering knuckle. Use a combination spanner #21. Use Torx T30. Use a torque wrench. Tighten it to 165 Nm torque.
  13. Step 17
    How to change Control Arm on BMW X1 (E84) 2014 - tips and tricks
    Treat the fasteners of the ball joint. Use copper grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the BMW X1 (E84) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
BMW X1 (E84) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY BMW X1 (E84) Control Arm replacement - online guide
Tips & tricks for your BMW X1 (E84)
View more
  • How to change Control arm on BMW X1 (E84) xDrive 20 d - replacement tricks
    Why do your brakes squeak? | AUTODOC tips
  • Changing Wishbone BMW X1 E84 xDrive18d 2.0 - Replacement Tips
    How to choose the right engine oil for your car | AUTODOC
  • Maintenance Hacks - BMW X1 (E84) sDrive 18 d Control arms replacement guide
    How to polish your car | AUTODOC tips
  • Replace Trailing arm on BMW X1 E84 - free video tips
    TOP 4 car cleaning products | AUTODOC tips