Important!
This replacement procedure can be used for:
BMW 5 Touring (E39) 520i, BMW 5 Touring (E39) 523i, BMW 5 Touring (E39) 528i, BMW 5 Touring (E39) 530 d, BMW 5 Touring (E39) 525tds, BMW 5 Touring (E39) 520i, BMW 5 Touring (E39) 520 d, BMW 5 Touring (E39) 525 d, BMW 5 Touring (E39) 530 d, BMW 5 Touring (E39) 520i, BMW 5 Touring (E39) 525 i, BMW 5 Touring (E39) 530i View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for 5 Touring (E39) and other BMW models
Alternative products
How to change Suspension arm on BMW E39 Touring 530d 3.0 – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: front lower arm – BMW 5 Touring (E39). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 16
Drive socket # 18
Drive socket # 22
Wheel impact socket #17
Ratchet wrench
Torque wrench
Ball joint puller
Hydraulic transmission jack
Wheel chock
Replacement: front lower arm – BMW 5 Touring (E39). AUTODOC recommends:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: front lower arm – BMW 5 Touring (E39). Use the following procedure:
  1. Step 1
    How to change Control Arm on BMW E39 Touring 1996 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace BMW 5 Touring (E39) 530d 3.0 1997 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    BMW E39 Touring 525i 2.5 1998 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: front lower arm – BMW 5 Touring (E39). Tip from AUTODOC:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on BMW 5 Touring (E39) 523i 1999 by yourself
    Remove the wheel.
  5. Step 6
    How to remove BMW 5 SERIES 520i 2000 Control Arm - online easy-to-follow instructions
    Remove the control arm cover.
  6. Step 7
    How to replace Control Arm on BMW 5 Touring (E39) 2001: download PDF manuals and video instructions
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on BMW E39 Touring 530i 2002 - download illustrated guide
    Unscrew the ball joint fastening to the steering knuckle. Use a drive socket #22. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Control Arm on BMW 5 SERIES 2003? This free workshop manual will help you to do it yourself
    Disconnect the ball joint from the steering knuckle. Use a ball joint puller.
  9. Step 10
    Changing of Control Arm on BMW E39 Touring 2004 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #16. Use a ratchet wrench.
  10. Step 11
    BMW 5 SERIES 530d 3.0 Control Arm replacement: online guides and video tutorials
    Unscrew the front arm fastener. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  11. Step 12
    Replacing Control Arm on BMW E39 Touring 1997 530d 3.0 by yourself
    Remove the front fastener of the control arm.
  12. Step 13
    5 Touring (E39) 520i 1998 Control Arm DIY replacement workshop manual
    Remove the arm.
  13. Step 14
    How to change Control Arm on BMW 5 Touring (E39) 1999 - tips and tricks
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  14. Step 15
    Step-by-step recommendations for DIY replacement BMW E39 Touring 2000 520i Control Arm
    Install a new arm.
    AUTODOC recommends:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  15. Step 16
    DIY replacement of Control Arm on BMW 5 Touring (E39) 525d 2.5 2001 is not an issue anymore with our step-by-step tutorial
    Connect the ball joint to the steering knuckle.
  16. Step 17
    How to change Control Arm on BMW E39 Touring 1996 - free PDF and video manuals
    Screw the fasteners of the ball joint. Use a drive socket #22. Use a ratchet wrench.
  17. Step 18
    How to replace BMW 5 Touring (E39) 530d 3.0 1997 Control Arm - step-by-step manuals and video guides
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  18. Step 19
    BMW E39 Touring 525i 2.5 1998 Control Arm replacement: free workshop manuals
    Install the front fastener of the arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the BMW 5 Touring (E39) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY BMW 5 Touring (E39) Control Arm replacement - online guide
Tips & tricks for your BMW 5 Touring (E39)
View more
  • How to change Control arm on BMW 5 Touring (E39) 525d 2.5 - replacement tricks
    What to do if the ABS light comes on: DIY Diagnostics Tips
  • Changing Wishbone BMW E39 Touring 530d 3.0 - Replacement Tips
    TOP 5 mistakes during DIY oil change | AUTODOC tips
  • Maintenance Hacks - BMW 5 Touring (E39) 525i 2.5 Control arms replacement guide
    Which Coolant is Best? Comparison Test | AUTODOC
  • Replace Trailing arm on BMW E39 Touring - free video tips
    The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
BMW 5 Touring (E39) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME