How to carry out replacement: Anti Roll Bar Links 530d 3.0 BMW E39 Touring
Disclaimer
Change BMW E39 Touring 530d 3.0 Anti Roll Bar Links yourself – manuals and video tutorials

How to change rear anti roll bar links on BMW 5 Touring (E39) – replacement guide

downloads: 0
Views: 3
Download your free tutorial and fix BMW 5 Touring (E39) 525tds problems yourself Download for free 1.22 MB Anti Roll Bar Links for BMW E39 Touring Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
BMW 5 Touring (E39) 520i, BMW 5 Touring (E39) 523i, BMW 5 Touring (E39) 540i, BMW 5 Touring (E39) 528i, BMW 5 Touring (E39) 530 d, BMW 5 Touring (E39) 525tds, BMW 5 Touring (E39) 520i, BMW 5 Touring (E39) 520 d, BMW 5 Touring (E39) 525 d, BMW 5 Touring (E39) 530 d, BMW 5 Touring (E39) 520i, BMW 5 Touring (E39) 525 i, BMW 5 Touring (E39) 530i, BMW 5 Touring (E39) 520i, BMW 5 Touring (E39) 523 i … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for 5 Touring (E39) and other BMW models
Alternative products
How to change Anti-roll bar link on BMW E39 Touring 530d 3.0 – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – BMW 5 Touring (E39). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #16
Drive socket # 16
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
Buy tools
Replacement: anti roll bar links – BMW 5 Touring (E39). Tip from AUTODOC:
  • Replace the stabiliser links on BMW 5 Touring (E39) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – BMW 5 Touring (E39) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Anti Roll Bar Links on BMW E39 Touring 1996 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace BMW 5 Touring (E39) 530d 3.0 1997 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    BMW E39 Touring 525i 2.5 1998 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – BMW 5 Touring (E39). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Anti Roll Bar Links on BMW 5 Touring (E39) 523i 1999 by yourself
    Remove the wheel.
  5. Step 6
    How to remove BMW 5 SERIES 520i 2000 Anti Roll Bar Links - online easy-to-follow instructions
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Anti Roll Bar Links on BMW 5 Touring (E39) 2001: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on BMW E39 Touring 530i 2002 - download illustrated guide
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on BMW 5 SERIES 2003? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – BMW 5 Touring (E39). Tip:
    Examine stabiliser bushes. Replace them if needed.
  9. Step 10
    Changing of Anti Roll Bar Links on BMW E39 Touring 2004 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 11
    BMW 5 SERIES 530d 3.0 Anti Roll Bar Links replacement: online guides and video tutorials
    Ιnstall the transverse stabilizer link.
  11. Step 12
    Replacing Anti Roll Bar Links on BMW E39 Touring 1997 530d 3.0 by yourself
    Tighten the stabiliser link fastener. Use a combination spanner #16. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the BMW 5 Touring (E39) model

BMW E39 Touring tyre size

Popular maintenance tutorials for BMW E39 Touring

More manuals for BMW E39 Touring

Complete guides for changing the Drop links on different BMW 5 SERIES models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY BMW 5 Touring (E39) Anti Roll Bar Links replacement - online guide
Tips & tricks for your BMW 5 Touring (E39)
View more
  • How to change Drop links on BMW 5 Touring (E39) 525d 2.5 - replacement tricks
    Understanding Airbag Light Warnings | Essential Tips for Car Safety
    6K views
    Published on: 10/04/2023
  • Changing Stabilizer link BMW E39 Touring 530d 3.0 - Replacement Tips
    How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
    5K views
    Published on: 04/03/2021
  • Maintenance Hacks - BMW 5 Touring (E39) 525i 2.5 Sway bar link replacement guide
    How to fix your car with AUTODOC CLUB
    17K views
    Published on: 30/11/2021
  • Replace Drop link on BMW E39 Touring - free video tips
    5 most common causes of oil leaks | AUTODOC tips
    69K views
    Published on: 30/03/2023

Most commonly replaced car parts on BMW 5 SERIES

Professional manuals for the most common BMW models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
BMW 5 Touring (E39) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME