Important!

This replacement procedure can be used for:
MERCEDES-BENZ C-Class Coupe (CL203) C 200 Kompressor (203.745), MERCEDES-BENZ C-Class Coupe (CL203) C 220 CDI (203.706), MERCEDES-BENZ C-Class Coupe (CL203) C 230 Kompressor (203.747), MERCEDES-BENZ C-Class Coupe (CL203) C 180 Kompressor (203.746), MERCEDES-BENZ C-Class Coupe (CL203) C 200 Kompressor (203.742), MERCEDES-BENZ C-Class Coupe (CL203) C 230 Kompressor (203.740), MERCEDES-BENZ C-Class Coupe (CL203) C 200 CGI Kompressor (203.743), MERCEDES-BENZ C-Class Coupe (CL203) C 200 CDI (203.707), MERCEDES-BENZ C-Class Coupe (CL203) C 220 CDI (203.708), MERCEDES-BENZ C-Class Coupe (CL203) C 230 (203.752), MERCEDES-BENZ C-Class Coupe (CL203) C 220 CDI … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Springs for C-Class Coupe (CL203) and other MERCEDES-BENZ models

Coil spring

        Coil spring for C-Class Coupe (CL203) Petrol (163 hp)
      
        Coil spring for C-Class Coupe (CL203) Diesel (143 hp)
      
        Coil spring for C-Class Coupe (CL203) Petrol (197 hp)
      
        Coil spring for C-Class Coupe (CL203) Petrol (143 hp)
      
        Coil spring for C-Class Coupe (CL203) Petrol (163 hp)
      
        Coil spring for C-Class Coupe (CL203) Petrol (192 hp)
      
        Coil spring for C-Class Coupe (CL203) Petrol (170 hp)
      
        Coil spring for C-Class Coupe (CL203) Diesel (122 hp)
      
        Coil spring for C-Class Coupe (CL203) Diesel (150 hp)

Replacement: coil springs – MERCEDES-BENZ C-CLASS Coupe (CL203). Tools you need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Torque wrench
                      
                        Combination spanner #21
                      
                        HEX bit No.H6.
                      
                        HEX bit No.H7.
                      
                        HEX bit No.H12.
                      
                        Drive socket # 16
                      
                        Drive socket # 19
                      
                        Drive socket # 21
                      
                        14Х2.5-mm strut nut socket
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Tap wrench
                      
                        Crow bar
                      
                        Nippers
                      
                        Hydraulic strut spring compressor
                      
                        Hydraulic transmission jack
                      
                        Fender cover
                      
                        Wheel chock

Buy tools

Replacement: coil springs – MERCEDES-BENZ C-CLASS Coupe (CL203). AUTODOC experts recommend:

Both coil springs of the front suspension should be replaced simultaneously.
The replacement procedure is identical for the left and right coil springs of the front suspension.
Please note: all work on the car – MERCEDES-BENZ C-CLASS Coupe (CL203) – should be done with the engine switched off.

Carry out replacement in the following order:

Step 1

Open the bonnet.

Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 3

Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
Step 4

Loosen the upper fastener of the shock strut mount. Use a combination spanner #21. Use HEX No.H7. Use a ratchet wrench.
Step 5

Secure the wheels with chocks.
Step 6

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 7

Raise the front of the car and secure on supports.

Step 8

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ C-CLASS Coupe (CL203)
Step 9

Remove the wheel.
Step 10

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 11

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a ratchet wrench.
Step 12

Remove the stabilizer rod.
Step 13

Disconnect the brake hose bracket. Use nippers.
Step 14

Disconnect the ABS sensor wiring.
Step 15

Disconnect the brake pad wear sensor wire.
Step 16

Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 17

Unscrew the upper fastener connecting the shock strut to the steering knuckle. Use HEX No.H12. Use a drive socket #21. Use a ratchet wrench. Use a tap wrench.
Step 18

Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
Step 19

Unscrew the fasteners connecting the suspension strut to the steering knuckle. Use a drive socket #19. Use a tap wrench.
Step 20

Remove the fastening bolts.
Step 21

Disconnect the steering knuckle from the shock absorber strut. Use a crowbar.
Step 22

Prop up the steering knuckle. Use a hydraulic transmission jack.
Step 23

Remove the fastening bolt.
Step 24

Disconnect the steering knuckle from the shock absorber strut. Use a crowbar.
Step 25

Unscrew the top fastening of the shock strut mount.

AUTODOC recommends:
MERCEDES-BENZ C-CLASS Coupe (CL203) – To avoid injury, hold the suspension strut while unscrewing the fastening bolts.
Step 26

Remove the suspension strut.
Step 27

Set the shock absorber strut on the spring compressor tool.

Replacement: coil springs – MERCEDES-BENZ C-CLASS Coupe (CL203). Tip from AUTODOC experts:
Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
Step 28

Compress the spring.
Step 29

Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
Step 30

Remove the strut piston rod nut. Use a 14Х2.5-mm strut nut socket. Use a drive socket #21. Use HEX No.H7. Use a ratchet wrench.
Step 31

Remove the top strut mount.
Step 32

Release the coil spring.
Step 33

Remove the spring.
Step 34

Remove the shock absorber dust cap and the bump stop.

AUTODOC recommends:
Replacement: coil springs – MERCEDES-BENZ C-CLASS Coupe (CL203). Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary.
Step 35

Install the boot and a bump stop onto the shock absorber.
Step 36

Install the spring on the shock absorber.
Step 37

Compress the spring.
Step 38

Treat the upper shock strut mount. Use WD-40 spray.
Step 39

Install the upper strut mount and the strut mount bearing.
Step 40

Tighten the shock strut piston rod nut. Use a 14Х2.5-mm strut nut socket. Use a drive socket #21. Use HEX No.H6. Use a torque wrench. Tighten it to 20 Nm torque.

AUTODOC recommends:
Replacement: coil springs – MERCEDES-BENZ C-CLASS Coupe (CL203). Be sure to position the filtering element correctly. Avoid misalignment.
Step 41

Treat the shock strut rod. Use copper grease.
Step 42

Decompress the spring.
Step 43

Remove the assembled shock strut.
Step 44

Treat the mounting seats of the shock strut. Use a wire brush. Use WD-40 spray.
Step 45

Install the shock strut into the wheel arch.
Step 46

Screw the top fastening of the shock strut mount. Do not tighten it.

AUTODOC recommends:
MERCEDES-BENZ C-CLASS Coupe (CL203) – To avoid injury, hold the suspension strut while screwing in the fastening bolts.
Step 47

Treat the mounting seats of the shock strut. Use a wire brush. Use WD-40 spray.
Step 48

Fix the shock absorber strut on the steering knuckle. Use a crowbar.
Step 49

Install the fastening bolt.
Step 50

Screw in the upper fastener connecting the shock strut to the steering knuckle. Use a drive socket #21. Use HEX No.H12. Use a ratchet wrench.
Step 51

Remove the support from under the steering knuckle.

AUTODOC recommends:
Replacement: coil springs – MERCEDES-BENZ C-CLASS Coupe (CL203). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
Step 52

Fix the shock absorber strut on the steering knuckle. Use a crowbar.
Step 53

Install the fastening bolts.
Step 54

Screw in the fasteners connecting the suspension strut to the steering knuckle. Use a drive socket #19. Use a ratchet wrench.
Step 55

Tighten the lower fasteners connecting the shock strut to the steering knuckle. Use a drive socket #19. Use a torque wrench. Tighten it to 110 Nm torque.
Step 56

Tighten the upper fastener connecting the shock strut to the steering knuckle. Use a drive socket #21. Use HEX No.H12. Use a torque wrench. Tighten it to 100 Nm torque.+90°

AUTODOC recommends:
Important! Be sure to use new fasteners.
Step 57

Secure the brake hose bracket. Use nippers.
Step 58

Connect the ABS sensor wiring.
Step 59

Connect the brake pad wear sensor wire.
Step 60

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.

Step 61

Ιnstall the transverse stabilizer link.
Step 62

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. Use a torque wrench. Tighten it to 60 Nm torque.
Step 63

Treat all joints of the stabiliser link.
Step 64

Treat the shock strut fasteners. Use copper grease.
Step 65

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 66

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: coil springs – MERCEDES-BENZ C-CLASS Coupe (CL203). After applying the spray, wait a few minutes.
Step 67

Install the wheel.

AUTODOC recommends:
Important! Hold the suspension strut while screwing in the fastening bolts. MERCEDES-BENZ C-CLASS Coupe (CL203)
Step 68

Screw in the wheel bolts. Use wheel impact socket #17.
Step 69

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 110 Nm torque.
Step 70

Remove the jacks and chocks.
Step 71

Tighten the upper fastener of the shock absorber strut mount. Use a combination spanner #21. Use HEX No.H6. Use a torque wrench. Tighten it to 60 Nm torque.
Step 72

Treat the fasteners of the shock strut mount. Use copper grease.

Step 73

Remove the fender protection cover.

Step 74

Close the hood.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ C-Class Coupe (CL203) model.

Browse tyres

How to change rear coil springs on MERCEDES-BENZ C-Class Coupe (CL203) – replacement guide

Free download PDF
3.3 MB
How to change rear shock absorbers on MERCEDES-BENZ C-Class Coupe (CL203) – replacement guide

Free download PDF
2.28 MB
How to change front suspension strut on MERCEDES-BENZ C-Class Coupe (CL203) – replacement guide

Free download PDF
3.73 MB
How to change front brake pads on MERCEDES-BENZ C-Class Coupe (CL203) – replacement guide

Free download PDF
1.54 MB
How to change rear brake pads on MERCEDES-BENZ C-Class Coupe (CL203) – replacement guide

Free download PDF
1.31 MB
How to change rear brake discs on MERCEDES-BENZ C-Class Coupe (CL203) – replacement guide

Free download PDF
1.82 MB

How to change front coil springs on Mercedes W204 – replacement guide

Free download PDF
2.76 MB
How to change rear coil springs on Mercedes W203 – replacement guide

Free download PDF
2.49 MB
How to change front coil springs on Mercedes W203 – replacement guide

Free download PDF
3.82 MB
How to change front coil springs on MERCEDES-BENZ C-Class Saloon (W202) – replacement guide

Free download PDF
1.98 MB
How to change front coil springs on MERCEDES-BENZ C-Class T-modell (S204) – replacement guide

Free download PDF
2.7 MB
How to change rear coil springs on MERCEDES-BENZ C-Class Coupe (CL203) – replacement guide

Free download PDF
3.3 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Car checks you need to carry out on your car after the winter | AUTODOC tips

3K views

Published on: 23/03/2023
How and why to check your oil | AUTODOC tips

5K views

Published on: 23/02/2023
5 most common causes of oil leaks | AUTODOC tips

15K views

Published on: 30/03/2023
How to prevent car windows from fogging up | AUTODOC tips

12K views

Published on: 04/02/2021